{"id":210,"date":"2026-03-22T08:34:00","date_gmt":"2026-03-22T00:34:00","guid":{"rendered":"https:\/\/www.han-sphere.com\/?p=210"},"modified":"2026-03-22T00:36:54","modified_gmt":"2026-03-21T16:36:54","slug":"high-speed-pcb-stackup-material-selection","status":"publish","type":"post","link":"https:\/\/www.han-sphere.com\/it\/blog\/news\/high-speed-pcb-stackup-material-selection\/","title":{"rendered":"Struttura dei PCB ad alta velocit\u00e0 e selezione dei materiali: l\u2019architettura dell\u2019integrit\u00e0 del segnale"},"content":{"rendered":"<p class=\"wp-block-paragraph\">In the realm of high-speed electronics, the PCB substrate is no longer a passive carrier\u2014it is a sophisticated dielectric component. At frequencies above 5GHz, standard FR-4 begins to act like a &#8220;signal sponge,&#8221; absorbing energy and distorting wave-fronts.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Per realizzare un sistema affidabile <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"https:\/\/www.han-sphere.com\/high-frequency-pcb\/\">Circuiti stampati ad alta frequenza<\/a>, gli ingegneri devono trovare un equilibrio tra stabilit\u00e0 termica, rendimento produttivo e fisica elettromagnetica. Ecco come <strong><a target=\"_blank\" rel=\"noreferrer noopener\" href=\"https:\/\/www.han-sphere.com\/\">Hansphere<\/a><\/strong> adotta un approccio progettuale incentrato sui materiali.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"445\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-8.jpg\" alt=\"progettazione di circuiti stampati ad alta velocit\u00e0\" class=\"wp-image-211\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-8.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-8-300x223.jpg 300w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">1. Scelta dei materiali: abbinare il laminato all'applicazione<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Non tutti i progetti ad alta velocit\u00e0 richiedono materiali da 50 dollari al libbra. La chiave sta nell'abbinare il <strong>Fattore di dissipazione (Df)<\/strong> alla frequenza di Nyquist del segnale.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">La gerarchia dei materiali:<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Perdita standard (FR-4):<\/strong> Ideale per schede di controllo e sistemi digitali a bassa velocit\u00e0.<\/li>\n\n\n\n<li><strong>Mid-Loss (ad es., Isola FR408HR):<\/strong> Il \u201cpunto ottimale\u201d per PCIe Gen3\/4 e Ethernet 10G.<\/li>\n\n\n\n<li><strong>A bassa perdita (ad es., Panasonic Megtron 6):<\/strong> Indispensabile per SerDes da 25 Gbps e oltre, acceleratori AI e server di fascia alta.<\/li>\n\n\n\n<li><strong>Perdita ultra-bassa \/ RF (ad es., Rogers 4350B\/4003C):<\/strong> Indispensabile per il 5G mmWave e <a href=\"https:\/\/www.han-sphere.com\/high-frequency-pcb\/\" target=\"_blank\" rel=\"noreferrer noopener\">Circuiti stampati ad alta frequenza<\/a> Front-end RF in cui la stabilit\u00e0 di $Dk$ rispetto alla temperatura \u00e8 fondamentale.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">2. Ingegneria strategica degli stackup<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Una struttura ben progettata costituisce la prima linea di difesa contro le interferenze elettromagnetiche (EMI). Essa determina l\u2019impedenza caratteristica e il percorso di ritorno di ogni rete ad alta velocit\u00e0.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Il quadro di riferimento \u201cSymmetry &amp; Coupling\u201d:<\/h3>\n\n\n\n<ol start=\"1\" class=\"wp-block-list\">\n<li><strong>Simmetria:<\/strong> Lo stackup deve essere fisicamente simmetrico rispetto al nucleo per evitare la \u201cdeformazione\u201d durante <strong><a href=\"https:\/\/www.han-sphere.com\/pcb-assembly\/\" target=\"_blank\" rel=\"noreferrer noopener\">Assemblaggio di circuiti stampati<\/a><\/strong>.<\/li>\n\n\n\n<li><strong>Accoppiamento dielettrico stretto:<\/strong> Mantenere lo spessore dello strato di segnale rispetto al piano di massa di riferimento il pi\u00f9 sottile possibile (in genere 3-5 mil). Ci\u00f2 consente di confinare il campo elettromagnetico e ridurre la diafonia.<\/li>\n\n\n\n<li><strong>Continuit\u00e0 del piano di massa:<\/strong> I segnali ad alta velocit\u00e0 non dovrebbero mai attraversare una divisione nel piano di riferimento.<\/li>\n<\/ol>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"466\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-10.jpg\" alt=\"progettazione di circuiti stampati ad alta velocit\u00e0\" class=\"wp-image-212\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-10.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-10-300x233.jpg 300w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">5 passaggi per definire la struttura di un circuito ad alta velocit\u00e0<\/h2>\n\n\n\n<div class=\"schema-how-to wp-block-yoast-how-to-block\"><p class=\"schema-how-to-description\"><strong>Destinatario:<\/strong> Architetti hardware e ingegneri SI <br><strong>In primo piano:<\/strong> Equilibrio tra prestazioni e producibilit\u00e0<\/p> <ol class=\"schema-how-to-steps\"><li class=\"schema-how-to-step\" id=\"how-to-step-1774110779806\"><strong class=\"schema-how-to-step-name\">Fase 1: Definire i valori di impedenza desiderati<\/strong> <p class=\"schema-how-to-step-text\">Identify your critical nets (e.g., 90\u03a9 USB, 100\u03a9 PCIe, 50\u03a9 Single-ended). Use an electromagnetic field solver to determine the required trace widths for your chosen material.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1774110828300\"><strong class=\"schema-how-to-step-name\">Fase 2: Selezionare l\u2019anima e il prepreg<\/strong> <p class=\"schema-how-to-step-text\">Scegliere materiali con un Dk (costante dielettrica) costante. Per <a href=\"https:\/\/www.han-sphere.com\/hdi-pcb\/\" target=\"_blank\" rel=\"noreferrer noopener\">Circuito stampato ad alta densit\u00e0 di interconnessioni<\/a>, assicurarsi che il prepreg sia compatibile con la foratura laser.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1774110849447\"><strong class=\"schema-how-to-step-name\">Fase 3: Tracciare il percorso di andata e ritorno del segnale<\/strong> <p class=\"schema-how-to-step-text\">Per ogni strato di segnale deve esserci un piano di massa adiacente. Nel 2026, le configurazioni \u201cmassa-segnale-segnale-massa\u201d sono comuni, ma richiedono un attento \u201cinstradamento ortogonale\u201d tra i due strati di segnale per evitare l\u2019accoppiamento laterale.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1774110856306\"><strong class=\"schema-how-to-step-name\">Fase 4: Verifica del profilo della lamina di rame<\/strong> <p class=\"schema-how-to-step-text\">Alle alte frequenze, l\u2019\u201ceffetto pelle\u201d spinge la corrente verso la superficie del rame. Il rame ruvido genera maggiore resistenza e perdite. Specificare <strong>Profilo molto basso (VLP)<\/strong> or <strong>Profilo estremamente basso (HVLP)<\/strong> rame per segnali superiori a 10 Gbps.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1774110871014\"><strong class=\"schema-how-to-step-name\">Fase 5: Consultazione con Hansphere DFM<\/strong> <p class=\"schema-how-to-step-text\">Prima di finalizzare il progetto, inviate il vostro stackup ai nostri ingegneri. Verificheremo che i materiali siano disponibili a magazzino e che la quantit\u00e0 di resina sia sufficiente a riempire i vuoti di rame durante <a href=\"https:\/\/www.han-sphere.com\/pcb-manufacturing\/\" target=\"_blank\" rel=\"noreferrer noopener\">Produzione di circuiti stampati<\/a>.<\/p> <\/li><\/ol><\/div>\n\n\n\n<h2 class=\"wp-block-heading\">3. Aspetti avanzati: configurazioni termiche e ibride<\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Gestione termica:<\/strong> I chip ad alta velocit\u00e0 si surriscaldano. Si consiglia di utilizzare <strong>Vie termiche<\/strong> o anche un <a href=\"https:\/\/www.han-sphere.com\/ceramic-pcb\/\" target=\"_blank\" rel=\"noreferrer noopener\">Circuito stampato in ceramica<\/a> da tenere presente se la vostra applicazione prevede l'uso di amplificatori RF ad alta potenza.<\/li>\n\n\n\n<li><strong>Configurazioni ibride:<\/strong> Per ridurre i costi, \u00e8 possibile utilizzare materiali ad alta velocit\u00e0 (come il Rogers) solo sugli strati superiori, dove transitano i segnali RF, mentre per gli strati interni a bassa velocit\u00e0 si pu\u00f2 ricorrere al FR-4 standard.<\/li>\n<\/ul>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"452\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-12.jpg\" alt=\"progettazione di circuiti stampati ad alta velocit\u00e0\" class=\"wp-image-213\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-12.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-12-300x226.jpg 300w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">FAQ \u2013 High-Speed PCB Stackup and Materials<\/h2>\n\n\n\n<div class=\"schema-faq wp-block-yoast-faq-block\"><div class=\"schema-faq-section\" id=\"faq-question-1767974170812\"><strong class=\"schema-faq-question\"><strong>Domanda 1: Che cos\u2019\u00e8 l\u2019\u201ceffetto trama di vetro\u201d e come posso evitarlo?<\/strong><\/strong> <p class=\"schema-faq-answer\"><strong>A:<\/strong> Ad alte velocit\u00e0, il segnale pu\u00f2 \u201crilevare\u201d gli spazi vuoti nella trama della fibra di vetro, causando una distorsione. Utilizzate la tecnica \u201cSpread Glass\u201d (ad esempio con trama 1067 o 1078) oppure tracciate le piste con una leggera angolazione (a zigzag) per compensare le variazioni di $Dk$.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1767974192350\"><strong class=\"schema-faq-question\">Q2: <strong> Il FR-4 standard \u00e8 adatto ai circuiti stampati ad alta velocit\u00e0?<\/strong><\/strong> <p class=\"schema-faq-answer\">A: Il FR-4 \u00e8 adatto a molti progetti ad alta velocit\u00e0, ma velocit\u00e0 di trasmissione dati pi\u00f9 elevate potrebbero richiedere laminati a bassa perdita.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1767974208004\"><strong class=\"schema-faq-question\"><strong>Domanda 3: In che modo la costante dielettrica (Dk) influisce sul mio progetto?<\/strong><\/strong> <p class=\"schema-faq-answer\"><strong>A:<\/strong> Il Dk determina la velocit\u00e0 del segnale. Un valore di Dk pi\u00f9 basso implica che i segnali viaggino pi\u00f9 velocemente e che le tracce possano essere pi\u00f9 larghe a parit\u00e0 di impedenza, riducendo cos\u00ec le perdite dovute all\u2019effetto pelle.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1767974261090\"><strong class=\"schema-faq-question\"><strong>Domanda 4: Hansphere \u00e8 in grado di fornire un rapporto certificato sull'impedenza?<\/strong><\/strong> <p class=\"schema-faq-answer\"><strong>A:<\/strong> S\u00ec. Per ogni <a href=\"https:\/\/www.han-sphere.com\/rigid-pcb\/\" target=\"_blank\" rel=\"noreferrer noopener\">Circuito stampato rigido<\/a> o per le schede ad alta velocit\u00e0, forniamo un rapporto completo dei test TDR e un certificato di conformit\u00e0 alle vostre specifiche di stackup.<\/p> <\/div> <\/div>\n\n\n\n<h2 class=\"wp-block-heading\">Conclusione<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">La disposizione degli strati e la scelta dei materiali costituiscono quella \u201cingegneria invisibile\u201d che rende possibile la stampa digitale ad alta velocit\u00e0. Scegliendo il giusto sistema di resina, il profilo del rame e la sequenza degli strati, si crea un ambiente stabile in cui i segnali possono propagarsi senza interferenze.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Hai bisogno di un assemblaggio di precisione?<\/strong> Non cercare di indovinare il valore dell\u2019impedenza. <strong><a target=\"_blank\" rel=\"noreferrer noopener\" href=\"https:\/\/www.han-sphere.com\/about\/\">Hansphere\u2019s Engineering Team<\/a><\/strong> \u00e8 specializzata in assemblaggi complessi con un elevato numero di strati e materiali esotici. <strong><a target=\"_blank\" rel=\"noreferrer noopener\" href=\"https:\/\/www.han-sphere.com\/contact\/\">Contattaci per una revisione dello stackup<\/a><\/strong> oggi.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>","protected":false},"excerpt":{"rendered":"<p>La presente guida tecnica approfondisce il punto di incontro fondamentale tra la scienza dei materiali e l\u2019architettura dei circuiti stampati (PCB). Con l\u2019aumentare delle velocit\u00e0 di trasmissione dati fino a 112G e oltre, le propriet\u00e0 dielettriche del substrato (Dk\/Df) e la precisione della struttura a strati diventano i fattori determinanti principali della perdita di segnale e della compatibilit\u00e0 elettromagnetica. Forniamo un quadro strategico per la selezione di laminati ad alta velocit\u00e0 e la progettazione di strutture a strati simmetriche e a bassa perdita per l\u2019hardware di telecomunicazione e informatico di prossima generazione.<\/p>","protected":false},"author":1,"featured_media":214,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":""},"categories":[4],"tags":[22],"class_list":["post-210","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news","tag-high-speed-pcb-stackup-design"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v26.5 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>High-Speed PCB Stackup &amp; Material Selection: A 2026 Material Science Guide<\/title>\n<meta name=\"description\" content=\"Optimize signal integrity through advanced PCB stackup and material selection. Compare FR-4, Rogers, and Megtron 6 for high-frequency designs.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.han-sphere.com\/it\/blog\/news\/high-speed-pcb-stackup-material-selection\/\" \/>\n<meta property=\"og:locale\" content=\"it_IT\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"High-Speed PCB Stackup &amp; Material Selection: A 2026 Material Science Guide\" \/>\n<meta property=\"og:description\" content=\"Optimize signal integrity through advanced PCB stackup and material selection. Compare FR-4, Rogers, and Megtron 6 for high-frequency designs.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.han-sphere.com\/it\/blog\/news\/high-speed-pcb-stackup-material-selection\/\" \/>\n<meta property=\"og:site_name\" content=\"hansphere\" \/>\n<meta property=\"article:published_time\" content=\"2026-03-22T00:34:00+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-11.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"600\" \/>\n\t<meta property=\"og:image:height\" content=\"450\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"hansphere01\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Scritto da\" \/>\n\t<meta name=\"twitter:data1\" content=\"hansphere01\" \/>\n\t<meta name=\"twitter:label2\" content=\"Tempo di lettura stimato\" \/>\n\t<meta name=\"twitter:data2\" content=\"4 minuti\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"WebPage\",\"FAQPage\"],\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/\",\"name\":\"High-Speed PCB Stackup & Material Selection: A 2026 Material Science Guide\",\"isPartOf\":{\"@id\":\"https:\/\/www.han-sphere.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-11.jpg\",\"datePublished\":\"2026-03-22T00:34:00+00:00\",\"author\":{\"@id\":\"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422\"},\"description\":\"Optimize signal integrity through advanced PCB stackup and material selection. Compare FR-4, Rogers, and Megtron 6 for high-frequency designs.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#breadcrumb\"},\"mainEntity\":[{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974170812\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974192350\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974208004\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974261090\"}],\"inLanguage\":\"it-IT\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"it-IT\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#primaryimage\",\"url\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-11.jpg\",\"contentUrl\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-11.jpg\",\"width\":600,\"height\":450,\"caption\":\"high speed pcb design\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.han-sphere.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"High-Speed PCB Stackup &amp; Material Selection: The Architecture of Signal Integrity\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.han-sphere.com\/#website\",\"url\":\"https:\/\/www.han-sphere.com\/\",\"name\":\"hansphere\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.han-sphere.com\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"it-IT\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422\",\"name\":\"hansphere01\",\"sameAs\":[\"http:\/\/www.han-sphere.com\/\"],\"url\":\"https:\/\/www.han-sphere.com\/it\/author\/hansphere01\/\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974170812\",\"position\":1,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974170812\",\"name\":\"Q1: What is \\\"Glass Weave Effect\\\" and how do I avoid it?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"<strong>A:<\/strong> At high speeds, the signal can \\\"see\\\" the gaps in the fiberglass weave, causing skew. Use \\\"Spread Glass\\\" (like 1067 or 1078 weave) or route your traces at a slight angle (zigzag) to average out the $Dk$ variations.\",\"inLanguage\":\"it-IT\"},\"inLanguage\":\"it-IT\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974192350\",\"position\":2,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974192350\",\"name\":\"Q2: Is standard FR-4 suitable for high-speed PCBs?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A: FR-4 can support many high-speed designs, but higher data rates may require low-loss laminates.\",\"inLanguage\":\"it-IT\"},\"inLanguage\":\"it-IT\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974208004\",\"position\":3,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974208004\",\"name\":\"Q3: How does the Dielectric Constant (Dk) affect my design?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"<strong>A:<\/strong> Dk determines the signal velocity. A lower Dk means signals travel faster and traces can be wider for the same impedance, which reduces skin-effect losses.\",\"inLanguage\":\"it-IT\"},\"inLanguage\":\"it-IT\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974261090\",\"position\":4,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974261090\",\"name\":\"Q4: Can Hansphere provide a certified impedance report?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"<strong>A:<\/strong> Yes. For every <a href=\\\"https:\/\/www.han-sphere.com\/rigid-pcb\/\\\" target=\\\"_blank\\\" rel=\\\"noreferrer noopener\\\">Rigid PCB<\/a> or high-speed board, we provide a full TDR test report and a certificate of compliance for your stackup specifications.\",\"inLanguage\":\"it-IT\"},\"inLanguage\":\"it-IT\"},{\"@type\":\"HowTo\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#howto-1\",\"name\":\"High-Speed PCB Stackup &amp; Material Selection: The Architecture of Signal Integrity\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/\"},\"description\":\"&lt;strong>Target:&lt;\/strong> Hardware Architects &amp; SI Engineers &lt;br>&lt;strong>Focus:&lt;\/strong> Balancing Performance and Fabricatability\",\"step\":[{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110779806\",\"name\":\"Step 1: Define Your Impedance Targets\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Identify your critical nets (e.g., 90\u03a9 USB, 100\u03a9 PCIe, 50\u03a9 Single-ended). Use an electromagnetic field solver to determine the required trace widths for your chosen material.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110828300\",\"name\":\"Step 2: Select the Core and Prepreg\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Choose materials with consistent Dk (Dielectric Constant). For <a href=\\\"https:\/\/www.han-sphere.com\/hdi-pcb\/\\\" target=\\\"_blank\\\" rel=\\\"noreferrer noopener\\\">HDI-PCB<\/a>, ensure the prepreg is compatible with laser drilling.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110849447\",\"name\":\"Step 3: Map the Signal-Return Path\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"For every signal layer, there must be an adjacent ground plane. In 2026, \\\"Ground-Signal-Signal-Ground\\\" configurations are common, but they require careful \\\"Orthogonal Routing\\\" between the two signal layers to prevent broadside coupling.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110856306\",\"name\":\"Step 4: Verify Copper Foil Profile\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"At high frequencies, the \\\"Skin Effect\\\" pushes current to the surface of the copper. Rough copper creates more resistance and loss. Specify <strong>Very Low Profile (VLP)<\/strong> or <strong>Hyper-Very Low Profile (HVLP)<\/strong> copper for signals above 10Gbps.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110871014\",\"name\":\"Step 5: Consult with Hansphere DFM\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Before freezing the design, send your stackup to our engineers. We verify that the materials are in stock and that the resin content is sufficient to fill the copper voids during <a href=\\\"https:\/\/www.han-sphere.com\/pcb-manufacturing\/\\\" target=\\\"_blank\\\" rel=\\\"noreferrer noopener\\\">PCB Manufacturing<\/a>.\"}]}],\"inLanguage\":\"it-IT\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Struttura dei circuiti stampati ad alta velocit\u00e0 e selezione dei materiali: una guida alla scienza dei materiali per il 2026","description":"Ottimizza l'integrit\u00e0 del segnale grazie a una struttura avanzata del PCB e alla scelta dei materiali. Confronta FR-4, Rogers e Megtron 6 per progetti ad alta frequenza.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.han-sphere.com\/it\/blog\/news\/high-speed-pcb-stackup-material-selection\/","og_locale":"it_IT","og_type":"article","og_title":"High-Speed PCB Stackup & Material Selection: A 2026 Material Science Guide","og_description":"Optimize signal integrity through advanced PCB stackup and material selection. Compare FR-4, Rogers, and Megtron 6 for high-frequency designs.","og_url":"https:\/\/www.han-sphere.com\/it\/blog\/news\/high-speed-pcb-stackup-material-selection\/","og_site_name":"hansphere","article_published_time":"2026-03-22T00:34:00+00:00","og_image":[{"width":600,"height":450,"url":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-11.jpg","type":"image\/jpeg"}],"author":"hansphere01","twitter_card":"summary_large_image","twitter_misc":{"Scritto da":"hansphere01","Tempo di lettura stimato":"4 minuti"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["WebPage","FAQPage"],"@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/","url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/","name":"Struttura dei circuiti stampati ad alta velocit\u00e0 e selezione dei materiali: una guida alla scienza dei materiali per il 2026","isPartOf":{"@id":"https:\/\/www.han-sphere.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#primaryimage"},"image":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#primaryimage"},"thumbnailUrl":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-11.jpg","datePublished":"2026-03-22T00:34:00+00:00","author":{"@id":"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422"},"description":"Ottimizza l'integrit\u00e0 del segnale grazie a una struttura avanzata del PCB e alla scelta dei materiali. Confronta FR-4, Rogers e Megtron 6 per progetti ad alta frequenza.","breadcrumb":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#breadcrumb"},"mainEntity":[{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974170812"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974192350"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974208004"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974261090"}],"inLanguage":"it-IT","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/"]}]},{"@type":"ImageObject","inLanguage":"it-IT","@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#primaryimage","url":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-11.jpg","contentUrl":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-11.jpg","width":600,"height":450,"caption":"high speed pcb design"},{"@type":"BreadcrumbList","@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.han-sphere.com\/"},{"@type":"ListItem","position":2,"name":"High-Speed PCB Stackup &amp; Material Selection: The Architecture of Signal Integrity"}]},{"@type":"WebSite","@id":"https:\/\/www.han-sphere.com\/#website","url":"https:\/\/www.han-sphere.com\/","name":"hansphere","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.han-sphere.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"it-IT"},{"@type":"Person","@id":"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422","name":"hansphere01","sameAs":["http:\/\/www.han-sphere.com\/"],"url":"https:\/\/www.han-sphere.com\/it\/author\/hansphere01\/"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974170812","position":1,"url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974170812","name":"Domanda 1: Che cos\u2019\u00e8 l\u2019\u201ceffetto trama di vetro\u201d e come posso evitarlo?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"<strong>A:<\/strong> At high speeds, the signal can \"see\" the gaps in the fiberglass weave, causing skew. Use \"Spread Glass\" (like 1067 or 1078 weave) or route your traces at a slight angle (zigzag) to average out the $Dk$ variations.","inLanguage":"it-IT"},"inLanguage":"it-IT"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974192350","position":2,"url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974192350","name":"Domanda 2: Il FR-4 standard \u00e8 adatto ai circuiti stampati ad alta velocit\u00e0?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"A: FR-4 can support many high-speed designs, but higher data rates may require low-loss laminates.","inLanguage":"it-IT"},"inLanguage":"it-IT"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974208004","position":3,"url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974208004","name":"Domanda 3: In che modo la costante dielettrica (Dk) influisce sul mio progetto?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"<strong>A:<\/strong> Dk determines the signal velocity. A lower Dk means signals travel faster and traces can be wider for the same impedance, which reduces skin-effect losses.","inLanguage":"it-IT"},"inLanguage":"it-IT"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974261090","position":4,"url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974261090","name":"Domanda 4: Hansphere \u00e8 in grado di fornire un rapporto certificato sull'impedenza?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"<strong>A:<\/strong> Yes. For every <a href=\"https:\/\/www.han-sphere.com\/rigid-pcb\/\" target=\"_blank\" rel=\"noreferrer noopener\">Rigid PCB<\/a> or high-speed board, we provide a full TDR test report and a certificate of compliance for your stackup specifications.","inLanguage":"it-IT"},"inLanguage":"it-IT"},{"@type":"HowTo","@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#howto-1","name":"Struttura dei PCB ad alta velocit\u00e0 e selezione dei materiali: l\u2019architettura dell\u2019integrit\u00e0 del segnale","mainEntityOfPage":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/"},"description":"&lt;strong&gt;Destinatario:&lt;\/strong&gt; Architetti hardware e ingegneri SI &lt;br&gt;&lt;strong&gt;In primo piano:&lt;\/strong&gt; Equilibrio tra prestazioni e producibilit&agrave;","step":[{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110779806","name":"Step 1: Define Your Impedance Targets","itemListElement":[{"@type":"HowToDirection","text":"Identify your critical nets (e.g., 90\u03a9 USB, 100\u03a9 PCIe, 50\u03a9 Single-ended). Use an electromagnetic field solver to determine the required trace widths for your chosen material."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110828300","name":"Step 2: Select the Core and Prepreg","itemListElement":[{"@type":"HowToDirection","text":"Choose materials with consistent Dk (Dielectric Constant). For <a href=\"https:\/\/www.han-sphere.com\/hdi-pcb\/\" target=\"_blank\" rel=\"noreferrer noopener\">HDI-PCB<\/a>, ensure the prepreg is compatible with laser drilling."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110849447","name":"Step 3: Map the Signal-Return Path","itemListElement":[{"@type":"HowToDirection","text":"For every signal layer, there must be an adjacent ground plane. In 2026, \"Ground-Signal-Signal-Ground\" configurations are common, but they require careful \"Orthogonal Routing\" between the two signal layers to prevent broadside coupling."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110856306","name":"Step 4: Verify Copper Foil Profile","itemListElement":[{"@type":"HowToDirection","text":"At high frequencies, the \"Skin Effect\" pushes current to the surface of the copper. Rough copper creates more resistance and loss. Specify <strong>Very Low Profile (VLP)<\/strong> or <strong>Hyper-Very Low Profile (HVLP)<\/strong> copper for signals above 10Gbps."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110871014","name":"Step 5: Consult with Hansphere DFM","itemListElement":[{"@type":"HowToDirection","text":"Before freezing the design, send your stackup to our engineers. We verify that the materials are in stock and that the resin content is sufficient to fill the copper voids during <a href=\"https:\/\/www.han-sphere.com\/pcb-manufacturing\/\" target=\"_blank\" rel=\"noreferrer noopener\">PCB Manufacturing<\/a>."}]}],"inLanguage":"it-IT"}]}},"_links":{"self":[{"href":"https:\/\/www.han-sphere.com\/it\/wp-json\/wp\/v2\/posts\/210","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.han-sphere.com\/it\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.han-sphere.com\/it\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/it\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/it\/wp-json\/wp\/v2\/comments?post=210"}],"version-history":[{"count":5,"href":"https:\/\/www.han-sphere.com\/it\/wp-json\/wp\/v2\/posts\/210\/revisions"}],"predecessor-version":[{"id":544,"href":"https:\/\/www.han-sphere.com\/it\/wp-json\/wp\/v2\/posts\/210\/revisions\/544"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/it\/wp-json\/wp\/v2\/media\/214"}],"wp:attachment":[{"href":"https:\/\/www.han-sphere.com\/it\/wp-json\/wp\/v2\/media?parent=210"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.han-sphere.com\/it\/wp-json\/wp\/v2\/categories?post=210"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.han-sphere.com\/it\/wp-json\/wp\/v2\/tags?post=210"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}