{"id":210,"date":"2026-03-22T08:34:00","date_gmt":"2026-03-22T00:34:00","guid":{"rendered":"https:\/\/www.han-sphere.com\/?p=210"},"modified":"2026-03-22T00:36:54","modified_gmt":"2026-03-21T16:36:54","slug":"high-speed-pcb-stackup-material-selection","status":"publish","type":"post","link":"https:\/\/www.han-sphere.com\/nl\/blog\/news\/high-speed-pcb-stackup-material-selection\/","title":{"rendered":"Snelle opbouw van printplaten en materiaalkeuze: de architectuur van signaalintegriteit"},"content":{"rendered":"<p class=\"wp-block-paragraph\">In the realm of high-speed electronics, the PCB substrate is no longer a passive carrier\u2014it is a sophisticated dielectric component. At frequencies above 5GHz, standard FR-4 begins to act like a &#8220;signal sponge,&#8221; absorbing energy and distorting wave-fronts.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Om een betrouwbare <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"https:\/\/www.han-sphere.com\/high-frequency-pcb\/\">Hoogfrequente printplaat<\/a>, moeten ingenieurs een evenwicht vinden tussen thermische stabiliteit, productieopbrengst en elektromagnetische fysica. Dat gaat als volgt: <strong><a target=\"_blank\" rel=\"noreferrer noopener\" href=\"https:\/\/www.han-sphere.com\/\">Hansphere<\/a><\/strong> neigt naar een materiaalgerichte ontwerpbenadering.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"445\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-8.jpg\" alt=\"ontwerp van printplaten voor hoge snelheden\" class=\"wp-image-211\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-8.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-8-300x223.jpg 300w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">1. Materiaalkeuze: het laminaat afstemmen op de toepassing<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Niet elk hogesnelheidsproject vereist materiaal van $50 per pond. Het komt erop aan de juiste combinatie te vinden tussen de <strong>Dissipatiefactor (Df)<\/strong> tot de Nyquist-frequentie van je signaal.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">De materiaalhi\u00ebrarchie:<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Standaardverlies (FR-4):<\/strong> Bij uitstek geschikt voor besturingskaarten en digitale toepassingen met lage snelheid.<\/li>\n\n\n\n<li><strong>Mid-Loss (bijv. Isola FR408HR):<\/strong> De \u201esweet spot\u201c voor PCIe Gen3\/4 en 10G Ethernet.<\/li>\n\n\n\n<li><strong>Laag verlies (bijv. Panasonic Megtron 6):<\/strong> Onmisbaar voor SerDes met 25 Gbps of meer, AI-versnellers en high-end servers.<\/li>\n\n\n\n<li><strong>Zeer laag verlies \/ RF (bijv. Rogers 4350B\/4003C):<\/strong> Onmisbaar voor 5G mmWave en <a href=\"https:\/\/www.han-sphere.com\/high-frequency-pcb\/\" target=\"_blank\" rel=\"noreferrer noopener\">Hoogfrequente printplaat<\/a> RF-front-ends waarbij de temperatuurstabiliteit van $Dk$ van cruciaal belang is.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">2. Strategische stackup-engineering<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Een goed ontworpen opbouw is de eerste verdedigingslinie tegen EMI. Deze bepaalt de karakteristieke impedantie en het retourpad van elk hogesnelheidsnetwerk.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Het \u201eSymmetry &amp; Coupling\u201d-raamwerk:<\/h3>\n\n\n\n<ol start=\"1\" class=\"wp-block-list\">\n<li><strong>Symmetrie:<\/strong> De opbouw moet fysiek symmetrisch zijn ten opzichte van de kern om &#8220;kromtrekken&#8221; te voorkomen tijdens <strong><a href=\"https:\/\/www.han-sphere.com\/pcb-assembly\/\" target=\"_blank\" rel=\"noreferrer noopener\">Printed Circuit Board-assemblage<\/a><\/strong>.<\/li>\n\n\n\n<li><strong>Sterke di\u00eblektrische koppeling:<\/strong> Zorg ervoor dat de afstand tussen de signaallaag en het bijbehorende referentie-aardvlak zo klein mogelijk is (doorgaans 3-5 mils). Hierdoor wordt het elektromagnetische veld ingeperkt en wordt overspraak verminderd.<\/li>\n\n\n\n<li><strong>Continu\u00efteit van het aardvlak:<\/strong> Hogesnelheidssignalen mogen nooit een splitsing in het referentievlak overschrijden.<\/li>\n<\/ol>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"466\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-10.jpg\" alt=\"ontwerp van printplaten voor hoge snelheden\" class=\"wp-image-212\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-10.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-10-300x233.jpg 300w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">5 stappen om een stack-up voor hoge snelheden af te ronden<\/h2>\n\n\n\n<div class=\"schema-how-to wp-block-yoast-how-to-block\"><p class=\"schema-how-to-description\"><strong>Doel:<\/strong> Hardware-architecten en SI-ingenieurs <br><strong>Focus:<\/strong> Een evenwicht vinden tussen prestaties en produceerbaarheid<\/p> <ol class=\"schema-how-to-steps\"><li class=\"schema-how-to-step\" id=\"how-to-step-1774110779806\"><strong class=\"schema-how-to-step-name\">Stap 1: Bepaal je impedantiedoelstellingen<\/strong> <p class=\"schema-how-to-step-text\">Identify your critical nets (e.g., 90\u03a9 USB, 100\u03a9 PCIe, 50\u03a9 Single-ended). Use an electromagnetic field solver to determine the required trace widths for your chosen material.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1774110828300\"><strong class=\"schema-how-to-step-name\">Stap 2: Kies de kern en het prepreg<\/strong> <p class=\"schema-how-to-step-text\">Kies materialen met een constante Dk (di\u00eblektrische constante). Voor <a href=\"https:\/\/www.han-sphere.com\/hdi-pcb\/\" target=\"_blank\" rel=\"noreferrer noopener\">Printplaat met hoge verbindingsdichtheid<\/a>, zorg ervoor dat het prepreg geschikt is voor laserboren.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1774110849447\"><strong class=\"schema-how-to-step-name\">Stap 3: Breng het signaal-retourpad in kaart<\/strong> <p class=\"schema-how-to-step-text\">Voor elke signaallaag moet er een aangrenzend grondvlak zijn. In 2026 zijn \u201cgrond-signaal-signaal-grond\u201d-configuraties gebruikelijk, maar deze vereisen een zorgvuldige \u201corthogonale routing\u201d tussen de twee signaallagen om zijdelingse koppeling te voorkomen.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1774110856306\"><strong class=\"schema-how-to-step-name\">Stap 4: Controleer het profiel van de koperfolie<\/strong> <p class=\"schema-how-to-step-text\">Bij hoge frequenties zorgt het &#8220;huideffect&#8221; ervoor dat de stroom naar het oppervlak van het koper wordt gedreven. Ruw koper zorgt voor meer weerstand en verlies. Specificeer <strong>Zeer laag profiel (VLP)<\/strong> or <strong>Hyper-Very Low Profile (HVLP)<\/strong> koper voor signalen van meer dan 10 Gbps.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1774110871014\"><strong class=\"schema-how-to-step-name\">Stap 5: Overleg met Hansphere DFM<\/strong> <p class=\"schema-how-to-step-text\">Stuur uw stack-up naar onze ingenieurs voordat u het ontwerp definitief vastlegt. Wij controleren of de materialen op voorraad zijn en of er voldoende hars aanwezig is om de koperen holtes op te vullen tijdens <a href=\"https:\/\/www.han-sphere.com\/pcb-manufacturing\/\" target=\"_blank\" rel=\"noreferrer noopener\">Printed circuit board-productie<\/a>.<\/p> <\/li><\/ol><\/div>\n\n\n\n<h2 class=\"wp-block-heading\">3. Geavanceerde overwegingen: thermische en hybride opbouwconfiguraties<\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Warmtebeheer:<\/strong> Snelle chips worden warm. Overweeg om <strong>Thermische via\u2019s<\/strong> of zelfs een <a href=\"https:\/\/www.han-sphere.com\/ceramic-pcb\/\" target=\"_blank\" rel=\"noreferrer noopener\">Keramische printplaat<\/a> basis als uw toepassing gebruikmaakt van RF-versterkers met een hoog vermogen.<\/li>\n\n\n\n<li><strong>Hybride opbouw:<\/strong> Om kosten te besparen, kunt u hoogfrequente materialen (zoals Rogers) alleen gebruiken op de bovenste lagen waar de RF-signalen zich bevinden, terwijl u voor de interne laagfrequente lagen standaard FR-4 gebruikt.<\/li>\n<\/ul>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"452\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-12.jpg\" alt=\"ontwerp van printplaten voor hoge snelheden\" class=\"wp-image-213\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-12.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-12-300x226.jpg 300w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">FAQ \u2013 High-Speed PCB Stackup and Materials<\/h2>\n\n\n\n<div class=\"schema-faq wp-block-yoast-faq-block\"><div class=\"schema-faq-section\" id=\"faq-question-1767974170812\"><strong class=\"schema-faq-question\"><strong>V1: Wat is het \u201eGlass Weave-effect\u201d en hoe kan ik dit voorkomen?<\/strong><\/strong> <p class=\"schema-faq-answer\"><strong>A:<\/strong> Bij hoge snelheden kan het signaal de openingen in het glasvezelweefsel \u2018zien\u2019, wat tot scheefloop leidt. Gebruik \u2018Spread Glass\u2019 (zoals weefsel 1067 of 1078) of leg je sporen onder een lichte hoek (zigzag) aan om de $Dk$-schommelingen te compenseren.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1767974192350\"><strong class=\"schema-faq-question\">Q2: <strong> Is standaard FR-4 geschikt voor printplaten voor hoge snelheden?<\/strong><\/strong> <p class=\"schema-faq-answer\">A: FR-4 is geschikt voor veel ontwerpen met hoge snelheden, maar voor hogere datasnelheden zijn mogelijk laminaten met een lage signaalverlies nodig.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1767974208004\"><strong class=\"schema-faq-question\"><strong>Vraag 3: Welke invloed heeft de di\u00eblektrische constante (Dk) op mijn ontwerp?<\/strong><\/strong> <p class=\"schema-faq-answer\"><strong>A:<\/strong> Dk bepaalt de signaalsnelheid. Een lagere Dk-waarde betekent dat signalen zich sneller voortbewegen en dat de sporen bij dezelfde impedantie breder kunnen zijn, waardoor verliezen door het huideffect worden verminderd.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1767974261090\"><strong class=\"schema-faq-question\"><strong>V4: Kan Hansphere een gecertificeerd impedantierapport verstrekken?<\/strong><\/strong> <p class=\"schema-faq-answer\"><strong>A:<\/strong> Ja. Voor elke <a href=\"https:\/\/www.han-sphere.com\/rigid-pcb\/\" target=\"_blank\" rel=\"noreferrer noopener\">Stijve printplaat<\/a> of een high-speed-printplaat: wij leveren een volledig TDR-testrapport en een conformiteitscertificaat voor uw stack-up-specificaties.<\/p> <\/div> <\/div>\n\n\n\n<h2 class=\"wp-block-heading\">Conclusie<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">De opbouw en materiaalkeuze vormen de \u2018Invisible Engineering\u2019 die digitale hogesnelheidstechnologie mogelijk maakt. Door het juiste harssysteem, koperprofiel en de juiste laagvolgorde te kiezen, cre\u00eber je een stabiele omgeving waarin signalen zich zonder storing kunnen verspreiden.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Op zoek naar een nauwkeurige stapelopstelling?<\/strong> Probeer de impedantie niet te raden. <strong><a target=\"_blank\" rel=\"noreferrer noopener\" href=\"https:\/\/www.han-sphere.com\/about\/\">Hansphere\u2019s Engineering Team<\/a><\/strong> is gespecialiseerd in complexe stapelconstructies met een groot aantal lagen en exotische materialen. <strong><a target=\"_blank\" rel=\"noreferrer noopener\" href=\"https:\/\/www.han-sphere.com\/contact\/\">Neem contact met ons op voor een Stackup-beoordeling<\/a><\/strong> vandaag.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>","protected":false},"excerpt":{"rendered":"<p>In deze technische gids wordt ingegaan op het cruciale raakvlak tussen materiaalkunde en PCB-architectuur. Naarmate de datasnelheden oplopen tot 112G en hoger, worden de di\u00eblektrische eigenschappen van het substraat (Dk\/Df) en de nauwkeurigheid van de laagopbouw de belangrijkste factoren die bepalend zijn voor signaalverlies en elektromagnetische compatibiliteit. Wij bieden een strategisch kader voor het selecteren van hogesnelheidslaminaten en het ontwerpen van symmetrische, verliesarme laagopbouwen voor de volgende generatie telecommunicatie- en computerhardware.<\/p>","protected":false},"author":1,"featured_media":214,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":""},"categories":[4],"tags":[22],"class_list":["post-210","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news","tag-high-speed-pcb-stackup-design"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v26.5 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>High-Speed PCB Stackup &amp; Material Selection: A 2026 Material Science Guide<\/title>\n<meta name=\"description\" content=\"Optimize signal integrity through advanced PCB stackup and material selection. Compare FR-4, Rogers, and Megtron 6 for high-frequency designs.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.han-sphere.com\/nl\/blog\/news\/high-speed-pcb-stackup-material-selection\/\" \/>\n<meta property=\"og:locale\" content=\"nl_NL\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"High-Speed PCB Stackup &amp; Material Selection: A 2026 Material Science Guide\" \/>\n<meta property=\"og:description\" content=\"Optimize signal integrity through advanced PCB stackup and material selection. Compare FR-4, Rogers, and Megtron 6 for high-frequency designs.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.han-sphere.com\/nl\/blog\/news\/high-speed-pcb-stackup-material-selection\/\" \/>\n<meta property=\"og:site_name\" content=\"hansphere\" \/>\n<meta property=\"article:published_time\" content=\"2026-03-22T00:34:00+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-11.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"600\" \/>\n\t<meta property=\"og:image:height\" content=\"450\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"hansphere01\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Geschreven door\" \/>\n\t<meta name=\"twitter:data1\" content=\"hansphere01\" \/>\n\t<meta name=\"twitter:label2\" content=\"Geschatte leestijd\" \/>\n\t<meta name=\"twitter:data2\" content=\"4 minuten\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"WebPage\",\"FAQPage\"],\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/\",\"name\":\"High-Speed PCB Stackup & Material Selection: A 2026 Material Science Guide\",\"isPartOf\":{\"@id\":\"https:\/\/www.han-sphere.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-11.jpg\",\"datePublished\":\"2026-03-22T00:34:00+00:00\",\"author\":{\"@id\":\"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422\"},\"description\":\"Optimize signal integrity through advanced PCB stackup and material selection. Compare FR-4, Rogers, and Megtron 6 for high-frequency designs.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#breadcrumb\"},\"mainEntity\":[{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974170812\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974192350\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974208004\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974261090\"}],\"inLanguage\":\"nl-NL\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"nl-NL\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#primaryimage\",\"url\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-11.jpg\",\"contentUrl\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-11.jpg\",\"width\":600,\"height\":450,\"caption\":\"high speed pcb design\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.han-sphere.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"High-Speed PCB Stackup &amp; Material Selection: The Architecture of Signal Integrity\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.han-sphere.com\/#website\",\"url\":\"https:\/\/www.han-sphere.com\/\",\"name\":\"hansphere\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.han-sphere.com\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"nl-NL\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422\",\"name\":\"hansphere01\",\"sameAs\":[\"http:\/\/www.han-sphere.com\/\"],\"url\":\"https:\/\/www.han-sphere.com\/nl\/author\/hansphere01\/\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974170812\",\"position\":1,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974170812\",\"name\":\"Q1: What is \\\"Glass Weave Effect\\\" and how do I avoid it?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"<strong>A:<\/strong> At high speeds, the signal can \\\"see\\\" the gaps in the fiberglass weave, causing skew. Use \\\"Spread Glass\\\" (like 1067 or 1078 weave) or route your traces at a slight angle (zigzag) to average out the $Dk$ variations.\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974192350\",\"position\":2,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974192350\",\"name\":\"Q2: Is standard FR-4 suitable for high-speed PCBs?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A: FR-4 can support many high-speed designs, but higher data rates may require low-loss laminates.\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974208004\",\"position\":3,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974208004\",\"name\":\"Q3: How does the Dielectric Constant (Dk) affect my design?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"<strong>A:<\/strong> Dk determines the signal velocity. A lower Dk means signals travel faster and traces can be wider for the same impedance, which reduces skin-effect losses.\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974261090\",\"position\":4,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974261090\",\"name\":\"Q4: Can Hansphere provide a certified impedance report?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"<strong>A:<\/strong> Yes. For every <a href=\\\"https:\/\/www.han-sphere.com\/rigid-pcb\/\\\" target=\\\"_blank\\\" rel=\\\"noreferrer noopener\\\">Rigid PCB<\/a> or high-speed board, we provide a full TDR test report and a certificate of compliance for your stackup specifications.\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"HowTo\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#howto-1\",\"name\":\"High-Speed PCB Stackup &amp; Material Selection: The Architecture of Signal Integrity\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/\"},\"description\":\"&lt;strong>Target:&lt;\/strong> Hardware Architects &amp; SI Engineers &lt;br>&lt;strong>Focus:&lt;\/strong> Balancing Performance and Fabricatability\",\"step\":[{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110779806\",\"name\":\"Step 1: Define Your Impedance Targets\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Identify your critical nets (e.g., 90\u03a9 USB, 100\u03a9 PCIe, 50\u03a9 Single-ended). Use an electromagnetic field solver to determine the required trace widths for your chosen material.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110828300\",\"name\":\"Step 2: Select the Core and Prepreg\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Choose materials with consistent Dk (Dielectric Constant). For <a href=\\\"https:\/\/www.han-sphere.com\/hdi-pcb\/\\\" target=\\\"_blank\\\" rel=\\\"noreferrer noopener\\\">HDI-PCB<\/a>, ensure the prepreg is compatible with laser drilling.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110849447\",\"name\":\"Step 3: Map the Signal-Return Path\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"For every signal layer, there must be an adjacent ground plane. In 2026, \\\"Ground-Signal-Signal-Ground\\\" configurations are common, but they require careful \\\"Orthogonal Routing\\\" between the two signal layers to prevent broadside coupling.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110856306\",\"name\":\"Step 4: Verify Copper Foil Profile\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"At high frequencies, the \\\"Skin Effect\\\" pushes current to the surface of the copper. Rough copper creates more resistance and loss. Specify <strong>Very Low Profile (VLP)<\/strong> or <strong>Hyper-Very Low Profile (HVLP)<\/strong> copper for signals above 10Gbps.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110871014\",\"name\":\"Step 5: Consult with Hansphere DFM\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Before freezing the design, send your stackup to our engineers. We verify that the materials are in stock and that the resin content is sufficient to fill the copper voids during <a href=\\\"https:\/\/www.han-sphere.com\/pcb-manufacturing\/\\\" target=\\\"_blank\\\" rel=\\\"noreferrer noopener\\\">PCB Manufacturing<\/a>.\"}]}],\"inLanguage\":\"nl-NL\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Opbouw en materiaalkeuze voor high-speed printplaten: een gids voor materiaalkunde voor 2026","description":"Optimaliseer de signaalintegriteit door middel van geavanceerde PCB-opbouw en materiaalkeuze. Vergelijk FR-4, Rogers en Megtron 6 voor ontwerpen voor hoge frequenties.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.han-sphere.com\/nl\/blog\/news\/high-speed-pcb-stackup-material-selection\/","og_locale":"nl_NL","og_type":"article","og_title":"High-Speed PCB Stackup & Material Selection: A 2026 Material Science Guide","og_description":"Optimize signal integrity through advanced PCB stackup and material selection. Compare FR-4, Rogers, and Megtron 6 for high-frequency designs.","og_url":"https:\/\/www.han-sphere.com\/nl\/blog\/news\/high-speed-pcb-stackup-material-selection\/","og_site_name":"hansphere","article_published_time":"2026-03-22T00:34:00+00:00","og_image":[{"width":600,"height":450,"url":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-11.jpg","type":"image\/jpeg"}],"author":"hansphere01","twitter_card":"summary_large_image","twitter_misc":{"Geschreven door":"hansphere01","Geschatte leestijd":"4 minuten"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["WebPage","FAQPage"],"@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/","url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/","name":"Opbouw en materiaalkeuze voor high-speed printplaten: een gids voor materiaalkunde voor 2026","isPartOf":{"@id":"https:\/\/www.han-sphere.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#primaryimage"},"image":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#primaryimage"},"thumbnailUrl":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-11.jpg","datePublished":"2026-03-22T00:34:00+00:00","author":{"@id":"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422"},"description":"Optimaliseer de signaalintegriteit door middel van geavanceerde PCB-opbouw en materiaalkeuze. Vergelijk FR-4, Rogers en Megtron 6 voor ontwerpen voor hoge frequenties.","breadcrumb":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#breadcrumb"},"mainEntity":[{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974170812"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974192350"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974208004"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974261090"}],"inLanguage":"nl-NL","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/"]}]},{"@type":"ImageObject","inLanguage":"nl-NL","@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#primaryimage","url":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-11.jpg","contentUrl":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/high-speed-pcb-design-11.jpg","width":600,"height":450,"caption":"high speed pcb design"},{"@type":"BreadcrumbList","@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.han-sphere.com\/"},{"@type":"ListItem","position":2,"name":"High-Speed PCB Stackup &amp; Material Selection: The Architecture of Signal Integrity"}]},{"@type":"WebSite","@id":"https:\/\/www.han-sphere.com\/#website","url":"https:\/\/www.han-sphere.com\/","name":"hansphere","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.han-sphere.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"nl-NL"},{"@type":"Person","@id":"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422","name":"hansphere01","sameAs":["http:\/\/www.han-sphere.com\/"],"url":"https:\/\/www.han-sphere.com\/nl\/author\/hansphere01\/"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974170812","position":1,"url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974170812","name":"V1: Wat is het \u201eglasweefsel-effect\u201c en hoe kan ik dit voorkomen?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"<strong>A:<\/strong> At high speeds, the signal can \"see\" the gaps in the fiberglass weave, causing skew. Use \"Spread Glass\" (like 1067 or 1078 weave) or route your traces at a slight angle (zigzag) to average out the $Dk$ variations.","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974192350","position":2,"url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974192350","name":"Vraag 2: Is standaard FR-4 geschikt voor printplaten voor hoge snelheden?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"A: FR-4 can support many high-speed designs, but higher data rates may require low-loss laminates.","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974208004","position":3,"url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974208004","name":"Vraag 3: Welke invloed heeft de di\u00eblektrische constante (Dk) op mijn ontwerp?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"<strong>A:<\/strong> Dk determines the signal velocity. A lower Dk means signals travel faster and traces can be wider for the same impedance, which reduces skin-effect losses.","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974261090","position":4,"url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#faq-question-1767974261090","name":"V4: Kan Hansphere een gecertificeerd impedantierapport verstrekken?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"<strong>A:<\/strong> Yes. For every <a href=\"https:\/\/www.han-sphere.com\/rigid-pcb\/\" target=\"_blank\" rel=\"noreferrer noopener\">Rigid PCB<\/a> or high-speed board, we provide a full TDR test report and a certificate of compliance for your stackup specifications.","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"HowTo","@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#howto-1","name":"Snelle opbouw van printplaten en materiaalkeuze: de architectuur van signaalintegriteit","mainEntityOfPage":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/"},"description":"&lt;strong&gt;Doel:&lt;\/strong&gt; Hardware-architecten en SI-ingenieurs &lt;br&gt;&lt;strong&gt;Focus:&lt;\/strong&gt; Een evenwicht vinden tussen prestaties en produceerbaarheid","step":[{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110779806","name":"Step 1: Define Your Impedance Targets","itemListElement":[{"@type":"HowToDirection","text":"Identify your critical nets (e.g., 90\u03a9 USB, 100\u03a9 PCIe, 50\u03a9 Single-ended). Use an electromagnetic field solver to determine the required trace widths for your chosen material."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110828300","name":"Step 2: Select the Core and Prepreg","itemListElement":[{"@type":"HowToDirection","text":"Choose materials with consistent Dk (Dielectric Constant). For <a href=\"https:\/\/www.han-sphere.com\/hdi-pcb\/\" target=\"_blank\" rel=\"noreferrer noopener\">HDI-PCB<\/a>, ensure the prepreg is compatible with laser drilling."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110849447","name":"Step 3: Map the Signal-Return Path","itemListElement":[{"@type":"HowToDirection","text":"For every signal layer, there must be an adjacent ground plane. In 2026, \"Ground-Signal-Signal-Ground\" configurations are common, but they require careful \"Orthogonal Routing\" between the two signal layers to prevent broadside coupling."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110856306","name":"Step 4: Verify Copper Foil Profile","itemListElement":[{"@type":"HowToDirection","text":"At high frequencies, the \"Skin Effect\" pushes current to the surface of the copper. Rough copper creates more resistance and loss. Specify <strong>Very Low Profile (VLP)<\/strong> or <strong>Hyper-Very Low Profile (HVLP)<\/strong> copper for signals above 10Gbps."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/high-speed-pcb-stackup-material-selection\/#how-to-step-1774110871014","name":"Step 5: Consult with Hansphere DFM","itemListElement":[{"@type":"HowToDirection","text":"Before freezing the design, send your stackup to our engineers. We verify that the materials are in stock and that the resin content is sufficient to fill the copper voids during <a href=\"https:\/\/www.han-sphere.com\/pcb-manufacturing\/\" target=\"_blank\" rel=\"noreferrer noopener\">PCB Manufacturing<\/a>."}]}],"inLanguage":"nl-NL"}]}},"_links":{"self":[{"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/posts\/210","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/comments?post=210"}],"version-history":[{"count":5,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/posts\/210\/revisions"}],"predecessor-version":[{"id":544,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/posts\/210\/revisions\/544"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/media\/214"}],"wp:attachment":[{"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/media?parent=210"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/categories?post=210"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/tags?post=210"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}