{"id":553,"date":"2026-03-29T08:33:00","date_gmt":"2026-03-29T00:33:00","guid":{"rendered":"https:\/\/www.han-sphere.com\/?p=553"},"modified":"2026-03-26T00:00:46","modified_gmt":"2026-03-25T16:00:46","slug":"fr4-dielectric-constant-er-vs-frequency","status":"publish","type":"post","link":"https:\/\/www.han-sphere.com\/nl\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/","title":{"rendered":"Uitleg over de di\u00eblektrische constante (Er) van FR4 versus frequentie"},"content":{"rendered":"<p class=\"wp-block-paragraph\">If you\u2019ve ever tried to match impedance on an FR4 stackup and found the numbers drifting, you\u2019ve already run into this problem.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">FR4 doesn\u2019t have a single dielectric constant. The value changes with frequency, and that change is enough to affect impedance, especially once you move beyond low-speed digital designs.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In de meeste datasheets staat nog steeds iets in de trant van <strong>Er = 4.2\u20134.6<\/strong>, maar dat getal is alleen zinvol onder specifieke testomstandigheden. In echte ontwerpen is het van belang hoe Er zich gedraagt over je daadwerkelijke frequentiebereik.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Zie voor een uitgebreider overzicht van de materialen <a href=\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-pcb-material-guide-properties-applications\/\"><strong>Gids voor FR4-printplaatmateriaal: eigenschappen, voordelen en toepassingen<\/strong>.<\/a><\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"517\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-17.jpg\" alt=\"FR4-printplaat\" class=\"wp-image-524\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-17.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-17-300x259.jpg 300w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-17-14x12.jpg 14w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">Wat is de di\u00eblektrische constante (Er)?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">De di\u00eblektrische constante (Er) geeft aan hoe een materiaal elektrische energie opslaat in een elektrisch veld.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Bij het ontwerpen van printplaten heeft Er direct invloed op:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>signaalvoortplantingssnelheid<\/li>\n\n\n\n<li>karakteristieke impedantie<\/li>\n\n\n\n<li>tracevertraging<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Higher Er \u2192 slower signal propagation \u2192 shorter wavelength in the material.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That\u2019s why Er shows up in every impedance calculator.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Waarom Er met de frequentie verandert<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">FR4 is not a uniform material. It\u2019s a mix of:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>glasvezel (laag verlies, lagere Er)<\/li>\n\n\n\n<li>epoxyhars (groter verlies, hogere Er)<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Vanwege deze structuur is het elektrische gedrag afhankelijk van de frequentie.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Naarmate de frequentie toeneemt:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>de polarisatiemechanismen in de hars veranderen<\/li>\n\n\n\n<li>de effectieve di\u00eblektrische constante neigt ertoe om <strong>licht dalen<\/strong><\/li>\n\n\n\n<li>het di\u00eblektrische verlies wordt duidelijker merkbaar<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Concreet betekent dit:<br><strong>Er bij 100 MHz is niet hetzelfde als Er bij enkele GHz.<\/strong><\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Typische Er-waarden versus frequentie<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">You won\u2019t get one universal curve, but the general trend looks like this:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Frequentiebereik<\/th><th>Typische FR4 Er<\/th><\/tr><\/thead><tbody><tr><td>1 MHz<\/td><td>~4.5\u20134.8<\/td><\/tr><tr><td>100 MHz<\/td><td>~4.3\u20134.6<\/td><\/tr><tr><td>1 GHz<\/td><td>~4.2\u20134.5<\/td><\/tr><tr><td>5\u201310 GHz<\/td><td>~4.0\u20134.3<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">De werkelijke waarden vari\u00ebren per leverancier en harssysteem.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Deze variatie is een van de redenen waarom bij ontwerpen voor hoge frequenties vaak wordt afgestapt van FR4.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Meer hierover vind je hier: <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-vs-rogers-pcb-high-frequency-design\/\">FR4 versus Rogers-printplaten voor hoogfrequentontwerp<\/a><\/strong>.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"499\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-15.jpg\" alt=\"FR4-printplaat\" class=\"wp-image-520\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-15.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-15-300x250.jpg 300w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-15-14x12.jpg 14w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">Gevolgen voor de impedantieregeling<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">If you assume a fixed Er in your calculations, your impedance won\u2019t be exact.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">De effecten komen tot uiting in:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>verschil tussen de berekende en de werkelijke impedantie<\/li>\n\n\n\n<li>signaalreflecties<\/li>\n\n\n\n<li>verslechterde oogdiagrammen (bij hogesnelheidsverbindingen)<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Zelfs een kleine verschuiving in de Er-waarde kan de impedantie met enkele ohm veranderen, wat voldoende is om van belang te zijn bij ontwerpen met geregelde impedantie.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Over de ontwerpoverwegingen bij stackup wordt ingegaan in <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-pcb-stackup-design-guide\/\">Ontwerphandleiding voor FR4-printplaatopbouw<\/a><\/strong>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Variatie binnen dezelfde printplaat<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Nog een praktisch punt: Er is niet overal even uniform.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Omdat sporen kunnen overlopen:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>gebieden met een hoger harsgehalte<\/li>\n\n\n\n<li>gebieden met meer glas<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">er kunnen lokale verschillen optreden.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Dit wordt soms ook wel de <strong>\u201cfiber weave effect\u201d<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Dit kan leiden tot:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>afwijking tussen differentiaalparen<\/li>\n\n\n\n<li>kleine impedantievariatie langs het spoor<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Not always critical\u2014but it shows up in high-speed designs.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Hoe je FR4 Er in echte ontwerpen kunt toepassen<\/h2>\n\n\n\n<div class=\"schema-how-to wp-block-yoast-how-to-block\"><p class=\"schema-how-to-description\">You don\u2019t need perfect data\u2014you need realistic assumptions.<\/p> <ol class=\"schema-how-to-steps\"><li class=\"schema-how-to-step\" id=\"how-to-step-1774453565242\"><strong class=\"schema-how-to-step-name\">1. Gebruik de gegevens van de fabrikant over de stapeling<\/strong> <p class=\"schema-how-to-step-text\">Don\u2019t rely on generic Er values.<br\/>Gebruik:<br\/>gegevensbladen over laminaat<br\/>impedantietabellen van uw printplaatleverancier<br\/>They\u2019re closer to actual fabrication conditions.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1774453593981\"><strong class=\"schema-how-to-step-name\">2. Ontwerp op basis van de doelimpedantie, niet op basis van de nominale Er<\/strong> <p class=\"schema-how-to-step-text\">In plaats van de aandacht direct op Er te richten:<br\/>define target impedance (e.g., 50\u03a9, 100\u03a9 diff)<br\/>pas de breedte en de afstand van de lijnen dienovereenkomstig aan<br\/>Laat de fabrikant helpen bij het afstemmen van de opbouw.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1774453621498\"><strong class=\"schema-how-to-step-name\">3. Wees voorzichtig bij hogere frequenties<\/strong> <p class=\"schema-how-to-step-text\">Naarmate de frequentie toeneemt:<br\/>de onzekerheid neemt toe<br\/>de verliezen nemen toe<br\/>Als uw ontwerp gevoelig is, moet u ervan uitgaan dat de prestaties iets slechter zullen zijn dan in de ideale berekeningen.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1774453635396\"><strong class=\"schema-how-to-step-name\">4. Houd signaallagen dicht bij de referentievlakken<\/strong> <p class=\"schema-how-to-step-text\">Dit vermindert de gevoeligheid voor variaties in Er en verbetert de stabiliteit van het retourpad.<br\/>De basisprincipes van het opbouwen van lagen worden behandeld in <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-pcb-stackup-design-guide\/\">Ontwerphandleiding voor FR4-printplaatopbouw<\/a><\/strong>.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1774453661721\"><strong class=\"schema-how-to-step-name\">5. Weet wanneer FR4 niet voldoende is<\/strong> <p class=\"schema-how-to-step-text\">At some point, tweaking Er assumptions won\u2019t fix the problem.<br\/>Als je het volgende ziet:<br\/>buitensporige invoegverliezen<br\/>onstabiele impedantie<br\/>strenge RF-eisen<br\/>Misschien is het tijd om over te stappen op een materiaal met weinig verlies.<br\/>See <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/low-loss-pcb-materials-rf-microwave-circuits\/\">PCB-materialen met lage signaalverliezen voor RF- en microgolfcircuits<\/a><\/strong>.<\/p> <\/li><\/ol><\/div>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"521\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-11.jpg\" alt=\"FR4-printplaat\" class=\"wp-image-514\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-11.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-11-300x261.jpg 300w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-11-14x12.jpg 14w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">Praktische tips uit echte ontwerpen<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Een paar dingen die mensen vaak verrassen:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>The Er in simulation tools often doesn\u2019t match fabricated boards<\/li>\n\n\n\n<li>Verschillende leveranciers kunnen merkbaar verschillende resultaten opleveren<\/li>\n\n\n\n<li>Prepreg and core materials don\u2019t behave identically<\/li>\n\n\n\n<li>De ruwheid van koper kan het effectieve di\u00eblektrische gedrag be\u00efnvloeden<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Beschouw Er dus als een <strong>bereik<\/strong>, geen constante.<\/p>\n\n\n\n<h1 class=\"wp-block-heading\">Conclusie<\/h1>\n\n\n\n<p class=\"wp-block-paragraph\">FR4 dielectric constant is not fixed\u2014it varies with frequency, material composition, and even layout conditions.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For low-speed designs, this variation usually doesn\u2019t matter.<br>Bij hogesnelheids- of RF-schakelingen heeft dit een directe invloed op de impedantie en de signaalintegriteit.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Het gaat er niet om een perfecte Er-waarde na te streven, maar om te ontwerpen op basis van realistische aannames en dit te valideren met je PCB-fabrikant.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">FAQ<\/h2>\n\n\n\n<div class=\"schema-faq wp-block-yoast-faq-block\"><div class=\"schema-faq-section\" id=\"faq-question-1774453753561\"><strong class=\"schema-faq-question\">Is de di\u00eblektrische constante van FR4 constant?<\/strong> <p class=\"schema-faq-answer\">Nee. Dat hangt af van de frequentie, de materiaalsamenstelling en het productieproces.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1774453858375\"><strong class=\"schema-faq-question\">Wat is de typische Er-waarde van FR4?<\/strong> <p class=\"schema-faq-answer\">Usually quoted around 4.2\u20134.6, but the actual value depends on frequency and laminate type.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1774453901118\"><strong class=\"schema-faq-question\">Waarom neemt Er af bij hogere frequenties?<\/strong> <p class=\"schema-faq-answer\">Omdat de polarisatiemechanismen in het materiaal minder effectief worden naarmate de frequentie toeneemt.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1774453912383\"><strong class=\"schema-faq-question\">Heeft de Er-variatie invloed op de impedantie?<\/strong> <p class=\"schema-faq-answer\">Ja. Zelfs kleine veranderingen in Er kunnen van invloed zijn op de geregelde impedantie en de signaalintegriteit.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1774453990064\"><strong class=\"schema-faq-question\">Wanneer moet ik stoppen met het gebruik van FR4?<\/strong> <p class=\"schema-faq-answer\">Ja. Zelfs kleine veranderingen in Er kunnen van invloed zijn op de geregelde impedantie en de signaalintegriteit.<\/p> <\/div> <\/div>","protected":false},"excerpt":{"rendered":"<p>De di\u00eblektrische constante (Er) van FR4 is geen vaste waarde. Deze varieert afhankelijk van de frequentie, de samenstelling van de hars en het productieproces. Deze variatie heeft invloed op de impedantieregeling en de signaalintegriteit, met name bij ontwerpen voor hoge snelheden en RF-toepassingen. In dit artikel wordt uitgelegd hoe Er verandert met de frequentie en waar ingenieurs rekening mee moeten houden bij het ontwerpen van printplaten op basis van FR4.<\/p>","protected":false},"author":1,"featured_media":511,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":""},"categories":[4],"tags":[44],"class_list":["post-553","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news","tag-fr4"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v26.5 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>FR4 Dielectric Constant (Er) vs Frequency Explained - HanSphere<\/title>\n<meta name=\"description\" content=\"Understand how the dielectric constant (Er) of FR4 changes with frequency and how it affects impedance and signal integrity in PCB design.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.han-sphere.com\/nl\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/\" \/>\n<meta property=\"og:locale\" content=\"nl_NL\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"FR4 Dielectric Constant (Er) vs Frequency Explained - HanSphere\" \/>\n<meta property=\"og:description\" content=\"Understand how the dielectric constant (Er) of FR4 changes with frequency and how it affects impedance and signal integrity in PCB design.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.han-sphere.com\/nl\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/\" \/>\n<meta property=\"og:site_name\" content=\"hansphere\" \/>\n<meta property=\"article:published_time\" content=\"2026-03-29T00:33:00+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-8.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"600\" \/>\n\t<meta property=\"og:image:height\" content=\"498\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"hansphere01\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Geschreven door\" \/>\n\t<meta name=\"twitter:data1\" content=\"hansphere01\" \/>\n\t<meta name=\"twitter:label2\" content=\"Geschatte leestijd\" \/>\n\t<meta name=\"twitter:data2\" content=\"5 minuten\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"WebPage\",\"FAQPage\"],\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/\",\"name\":\"FR4 Dielectric Constant (Er) vs Frequency Explained - HanSphere\",\"isPartOf\":{\"@id\":\"https:\/\/www.han-sphere.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-8.jpg\",\"datePublished\":\"2026-03-29T00:33:00+00:00\",\"author\":{\"@id\":\"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422\"},\"description\":\"Understand how the dielectric constant (Er) of FR4 changes with frequency and how it affects impedance and signal integrity in PCB design.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#breadcrumb\"},\"mainEntity\":[{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453753561\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453858375\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453901118\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453912383\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453990064\"}],\"inLanguage\":\"nl-NL\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"nl-NL\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#primaryimage\",\"url\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-8.jpg\",\"contentUrl\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-8.jpg\",\"width\":600,\"height\":498,\"caption\":\"FR4 PCB\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.han-sphere.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"FR4 Dielectric Constant (Er) vs Frequency Explained\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.han-sphere.com\/#website\",\"url\":\"https:\/\/www.han-sphere.com\/\",\"name\":\"hansphere\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.han-sphere.com\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"nl-NL\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422\",\"name\":\"hansphere01\",\"sameAs\":[\"http:\/\/www.han-sphere.com\/\"],\"url\":\"https:\/\/www.han-sphere.com\/nl\/author\/hansphere01\/\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453753561\",\"position\":1,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453753561\",\"name\":\"Is FR4 dielectric constant constant?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. It varies with frequency, material composition, and manufacturing process.\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453858375\",\"position\":2,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453858375\",\"name\":\"What is the typical Er value of FR4?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Usually quoted around 4.2\u20134.6, but the actual value depends on frequency and laminate type.\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453901118\",\"position\":3,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453901118\",\"name\":\"Why does Er decrease at higher frequencies?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Because polarization mechanisms in the material become less effective as frequency increases.\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453912383\",\"position\":4,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453912383\",\"name\":\"Does Er variation affect impedance?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Even small changes in Er can affect controlled impedance and signal integrity.\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453990064\",\"position\":5,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453990064\",\"name\":\"When should I stop using FR4?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Even small changes in Er can affect controlled impedance and signal integrity.\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"HowTo\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#howto-1\",\"name\":\"FR4 Dielectric Constant (Er) vs Frequency Explained\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/\"},\"description\":\"You don\u2019t need perfect data\u2014you need realistic assumptions.\",\"step\":[{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#how-to-step-1774453565242\",\"name\":\"1. Use Manufacturer Stackup Data\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Don\u2019t rely on generic Er values.<br\/>Use:<br\/>laminate datasheets<br\/>impedance tables from your PCB vendor<br\/>They\u2019re closer to actual fabrication conditions.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#how-to-step-1774453593981\",\"name\":\"2. Design Around Target Impedance, Not Nominal Er\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Instead of focusing on Er directly:<br\/>define target impedance (e.g., 50\u03a9, 100\u03a9 diff)<br\/>adjust trace width and spacing accordingly<br\/>Let the manufacturer help tune the stackup.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#how-to-step-1774453621498\",\"name\":\"3. Be Conservative at Higher Frequencies\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"As frequency increases:<br\/>uncertainty increases<br\/>loss increases<br\/>If your design is sensitive, assume slightly worse performance than ideal calculations.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#how-to-step-1774453635396\",\"name\":\"4. Keep Signal Layers Close to Reference Planes\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"This reduces sensitivity to Er variation and improves return path stability.<br\/>Basic stackup practices are covered in <strong><a href=\\\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-pcb-stackup-design-guide\/\\\">FR4 PCB Stackup Design Guide<\/a><\/strong>.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#how-to-step-1774453661721\",\"name\":\"5. Know When FR4 Is Not Enough\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"At some point, tweaking Er assumptions won\u2019t fix the problem.<br\/>If you see:<br\/>excessive insertion loss<br\/>unstable impedance<br\/>tight RF requirements<br\/>it may be time to move to a low-loss material.<br\/>See <strong><a href=\\\"https:\/\/www.han-sphere.com\/blog\/news\/low-loss-pcb-materials-rf-microwave-circuits\/\\\">Low-Loss PCB Materials for RF and Microwave Circuits<\/a><\/strong>.\"}]}],\"inLanguage\":\"nl-NL\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Uitleg over de di\u00eblektrische constante (Er) van FR4 versus frequentie - HanSphere","description":"Begrijp hoe de di\u00eblektrische constante (Er) van FR4 verandert met de frequentie en hoe dit van invloed is op de impedantie en de signaalintegriteit bij het ontwerpen van printplaten.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.han-sphere.com\/nl\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/","og_locale":"nl_NL","og_type":"article","og_title":"FR4 Dielectric Constant (Er) vs Frequency Explained - HanSphere","og_description":"Understand how the dielectric constant (Er) of FR4 changes with frequency and how it affects impedance and signal integrity in PCB design.","og_url":"https:\/\/www.han-sphere.com\/nl\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/","og_site_name":"hansphere","article_published_time":"2026-03-29T00:33:00+00:00","og_image":[{"width":600,"height":498,"url":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-8.jpg","type":"image\/jpeg"}],"author":"hansphere01","twitter_card":"summary_large_image","twitter_misc":{"Geschreven door":"hansphere01","Geschatte leestijd":"5 minuten"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["WebPage","FAQPage"],"@id":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/","url":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/","name":"Uitleg over de di\u00eblektrische constante (Er) van FR4 versus frequentie - HanSphere","isPartOf":{"@id":"https:\/\/www.han-sphere.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#primaryimage"},"image":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#primaryimage"},"thumbnailUrl":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-8.jpg","datePublished":"2026-03-29T00:33:00+00:00","author":{"@id":"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422"},"description":"Begrijp hoe de di\u00eblektrische constante (Er) van FR4 verandert met de frequentie en hoe dit van invloed is op de impedantie en de signaalintegriteit bij het ontwerpen van printplaten.","breadcrumb":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#breadcrumb"},"mainEntity":[{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453753561"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453858375"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453901118"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453912383"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453990064"}],"inLanguage":"nl-NL","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/"]}]},{"@type":"ImageObject","inLanguage":"nl-NL","@id":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#primaryimage","url":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-8.jpg","contentUrl":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-8.jpg","width":600,"height":498,"caption":"FR4 PCB"},{"@type":"BreadcrumbList","@id":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.han-sphere.com\/"},{"@type":"ListItem","position":2,"name":"FR4 Dielectric Constant (Er) vs Frequency Explained"}]},{"@type":"WebSite","@id":"https:\/\/www.han-sphere.com\/#website","url":"https:\/\/www.han-sphere.com\/","name":"hansphere","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.han-sphere.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"nl-NL"},{"@type":"Person","@id":"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422","name":"hansphere01","sameAs":["http:\/\/www.han-sphere.com\/"],"url":"https:\/\/www.han-sphere.com\/nl\/author\/hansphere01\/"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453753561","position":1,"url":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453753561","name":"Is de di\u00eblektrische constante van FR4 constant?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"No. It varies with frequency, material composition, and manufacturing process.","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453858375","position":2,"url":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453858375","name":"Wat is de typische Er-waarde van FR4?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Usually quoted around 4.2\u20134.6, but the actual value depends on frequency and laminate type.","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453901118","position":3,"url":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453901118","name":"Waarom neemt Er af bij hogere frequenties?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Because polarization mechanisms in the material become less effective as frequency increases.","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453912383","position":4,"url":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453912383","name":"Heeft de Er-variatie invloed op de impedantie?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Yes. Even small changes in Er can affect controlled impedance and signal integrity.","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453990064","position":5,"url":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#faq-question-1774453990064","name":"Wanneer moet ik stoppen met het gebruik van FR4?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Yes. Even small changes in Er can affect controlled impedance and signal integrity.","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"HowTo","@id":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#howto-1","name":"Uitleg over de di\u00eblektrische constante (Er) van FR4 versus frequentie","mainEntityOfPage":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/"},"description":"You don\u2019t need perfect data\u2014you need realistic assumptions.","step":[{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#how-to-step-1774453565242","name":"1. Use Manufacturer Stackup Data","itemListElement":[{"@type":"HowToDirection","text":"Don\u2019t rely on generic Er values.<br\/>Use:<br\/>laminate datasheets<br\/>impedance tables from your PCB vendor<br\/>They\u2019re closer to actual fabrication conditions."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#how-to-step-1774453593981","name":"2. Design Around Target Impedance, Not Nominal Er","itemListElement":[{"@type":"HowToDirection","text":"Instead of focusing on Er directly:<br\/>define target impedance (e.g., 50\u03a9, 100\u03a9 diff)<br\/>adjust trace width and spacing accordingly<br\/>Let the manufacturer help tune the stackup."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#how-to-step-1774453621498","name":"3. Be Conservative at Higher Frequencies","itemListElement":[{"@type":"HowToDirection","text":"As frequency increases:<br\/>uncertainty increases<br\/>loss increases<br\/>If your design is sensitive, assume slightly worse performance than ideal calculations."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#how-to-step-1774453635396","name":"4. Keep Signal Layers Close to Reference Planes","itemListElement":[{"@type":"HowToDirection","text":"This reduces sensitivity to Er variation and improves return path stability.<br\/>Basic stackup practices are covered in <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-pcb-stackup-design-guide\/\">FR4 PCB Stackup Design Guide<\/a><\/strong>."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/#how-to-step-1774453661721","name":"5. Know When FR4 Is Not Enough","itemListElement":[{"@type":"HowToDirection","text":"At some point, tweaking Er assumptions won\u2019t fix the problem.<br\/>If you see:<br\/>excessive insertion loss<br\/>unstable impedance<br\/>tight RF requirements<br\/>it may be time to move to a low-loss material.<br\/>See <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/low-loss-pcb-materials-rf-microwave-circuits\/\">Low-Loss PCB Materials for RF and Microwave Circuits<\/a><\/strong>."}]}],"inLanguage":"nl-NL"}]}},"_links":{"self":[{"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/posts\/553","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/comments?post=553"}],"version-history":[{"count":1,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/posts\/553\/revisions"}],"predecessor-version":[{"id":554,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/posts\/553\/revisions\/554"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/media\/511"}],"wp:attachment":[{"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/media?parent=553"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/categories?post=553"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/tags?post=553"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}