{"id":555,"date":"2026-03-31T08:02:00","date_gmt":"2026-03-31T00:02:00","guid":{"rendered":"https:\/\/www.han-sphere.com\/?p=555"},"modified":"2026-03-26T00:16:46","modified_gmt":"2026-03-25T16:16:46","slug":"pcb-insertion-loss-dielectric-vs-conductor-loss","status":"publish","type":"post","link":"https:\/\/www.han-sphere.com\/nl\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/","title":{"rendered":"Uitleg over het invoegverlies bij printplaten: di\u00eblektrisch verlies versus geleidingsverlies"},"content":{"rendered":"<p class=\"wp-block-paragraph\">Zodra je je bezighoudt met hogesnelheids- of RF-ontwerp, is invoegverlies niet langer een theoretisch probleem, maar wordt het zichtbaar in de meetresultaten.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Je legt een spoor aan, simuleert het, en alles ziet er prima uit. Dan krijg je de echte printplaat terug, en blijkt de signaalamplitude lager te zijn dan verwacht. Die afname is het insertieverlies.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In de basis is het invoegverlies gewoon <strong>hoeveel signaal je verliest van het ene uiteinde van een spoor naar het andere<\/strong>. Bij printplaten is het grootste deel afkomstig van twee bronnen:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>di\u00eblektrische verliezen (materiaal)<\/li>\n\n\n\n<li>geleidingsverlies (koper)<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Understanding both helps you know where the problem is\u2014and what you can realistically fix.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Zie voor achtergrondinformatie <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/\">Uitleg over de di\u00eblektrische constante (Er) van FR4 versus frequentie<\/a><\/strong>.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"424\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/Rigid-Flex-PCB-1.jpg\" alt=\"Rigid-Flex-printplaat\" class=\"wp-image-411\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/Rigid-Flex-PCB-1.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/Rigid-Flex-PCB-1-300x212.jpg 300w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">Wat is invoegverlies?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Invoegverlies wordt meestal uitgedrukt in <strong>dB<\/strong> en geeft de signaalverzwakking in een transmissiepad weer.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Higher loss \u2192 weaker signal at the receiver.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Dat hangt af van:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>trace-lengte<\/li>\n\n\n\n<li>frequentie<\/li>\n\n\n\n<li>materiaaleigenschappen<\/li>\n\n\n\n<li>toestand van het koperoppervlak<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Het verlies neemt toe naarmate de frequentie stijgt; daarom is dit van cruciaal belang bij:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>digitale hogesnelheidsverbindingen<\/li>\n\n\n\n<li>RF-schakelingen<\/li>\n\n\n\n<li>lange backplane-sporen<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Di\u00eblektrisch verlies<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Het di\u00eblektrische verlies is te wijten aan het PCB-substraat zelf.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Terwijl het signaal zich voortplant, wordt een deel van de elektromagnetische energie door het di\u00eblektrische materiaal geabsorbeerd en omgezet in warmte.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Dit wordt voornamelijk bepaald door:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>verliesfactor (Df)<\/li>\n\n\n\n<li>frequentie<\/li>\n\n\n\n<li>gedrag van de di\u00eblektrische constante<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">FR4 heeft een relatief hogere verliesfactor dan andere RF-materialen, waardoor het bij hogere frequenties minder goed presteert.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Hierop wordt nader ingegaan in <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/low-loss-pcb-materials-rf-microwave-circuits\/\">PCB-materialen met lage signaalverliezen voor RF- en microgolfcircuits<\/a><\/strong>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Verlies in de geleider<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Het geleidingsverlies hangt samen met de koperen spoorlijn.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">At higher frequencies, current does not flow uniformly through the entire conductor. Instead, it concentrates near the surface\u2014a phenomenon known as the <strong>huideffect<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Naarmate de frequentie toeneemt:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>de effectieve weerstand neemt toe<\/li>\n\n\n\n<li>de signaalverzwakking neemt toe<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Ook de oppervlakteruwheid speelt een rol. Ruw koper vergroot de effectieve weglengte van de stroom, waardoor het verlies toeneemt.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"437\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/02\/Rigid-PCB-2.jpg\" alt=\"Stijve printplaat\" class=\"wp-image-336\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/02\/Rigid-PCB-2.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/02\/Rigid-PCB-2-300x219.jpg 300w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">Di\u00eblektrische versus geleidingsverliezen (kort overzicht)<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Soort verlies<\/th><th>Bron<\/th><th>Dominant bij<\/th><th>Belangrijke factoren<\/th><\/tr><\/thead><tbody><tr><td>Di\u00eblektrisch verlies<\/td><td>PCB-materiaal<\/td><td>hogere frequenties<\/td><td>verlies-tangens, Er<\/td><\/tr><tr><td>Verlies in de geleider<\/td><td>koperen sporen<\/td><td>alle frequenties (erger bij hoge frequenties)<\/td><td>huideffect, ruwheid<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">In de meeste RF-ontwerpen:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Bij zeer hoge frequenties speelt di\u00eblektrisch verlies de grootste rol<\/li>\n\n\n\n<li>conductor loss is always present and can\u2019t be ignored<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Hoe de frequentie het invoegverlies be\u00efnvloedt<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">De invoegverliezen nemen ongeveer evenredig met de frequentie toe.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>het di\u00eblektrische verlies neemt bijna lineair toe met de frequentie<\/li>\n\n\n\n<li>het geleidingsverlies neemt toe met de vierkantswortel van de frequentie<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">That\u2019s why a design that works fine at 1 GHz may struggle at 10 GHz without any geometry change.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Hoe het invoegverlies van printplaten te verminderen<\/h2>\n\n\n\n<div class=\"schema-how-to wp-block-yoast-how-to-block\"><p class=\"schema-how-to-description\">You can\u2019t eliminate loss\u2014but you can manage it.<\/p> <ol class=\"schema-how-to-steps\"><li class=\"schema-how-to-step\" id=\"how-to-step-1774454898247\"><strong class=\"schema-how-to-step-name\">1. Kies materialen met een lagere verliesfactor<\/strong> <p class=\"schema-how-to-step-text\">Dit is meestal de belangrijkste hefboom.<br\/>switch from FR4 \u2192 low-loss FR4 \u2192 Rogers \u2192 PTFE<br\/>lagere verliesfactor = minder di\u00eblektrisch verlies<br\/>See <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-vs-rogers-pcb-high-frequency-design\/\">FR4 versus Rogers-printplaten voor hoogfrequentontwerp<\/a><\/strong><\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1774454937467\"><strong class=\"schema-how-to-step-name\">2. Verkort kritieke signaalpaden<\/strong> <p class=\"schema-how-to-step-text\">Het verlies is evenredig met de lengte.<br\/>Eenvoudig, maar wordt vaak over het hoofd gezien:<br\/>plaats de onderdelen dichter bij elkaar<br\/>onnodige routering beperken<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1774454949637\"><strong class=\"schema-how-to-step-name\">3. De opbouw optimaliseren<\/strong> <p class=\"schema-how-to-step-text\">De stapeling heeft invloed op zowel het verlies als de impedantie.<br\/>houd signalen dicht bij de referentievlakken<br\/>de di\u00eblektrische dikte regelen<br\/>vermijd onnodige overgangen tussen lagen<br\/>Details: <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-pcb-stackup-design-guide\/\">Ontwerphandleiding voor FR4-printplaatopbouw<\/a><\/strong><\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1774454976716\"><strong class=\"schema-how-to-step-name\">4. Gebruik gladder koper<\/strong> <p class=\"schema-how-to-step-text\">De ruwheid van koper verhoogt het geleidingsverlies.<br\/>In veel ontwerpen voor hoge snelheden wordt gebruikgemaakt van:<br\/>onopvallend koper<br\/>koper met zeer laag profiel (VLP)<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1774454996070\"><strong class=\"schema-how-to-step-name\">5. De geometrie van het spoor aanpassen<\/strong> <p class=\"schema-how-to-step-text\">Wider traces \u2192 lower resistance \u2192 lower conductor loss<br\/>Maar hierbij moet rekening worden gehouden met de impedantie-eisen.<\/p> <\/li><\/ol><\/div>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"407\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/02\/Rigid-PCB-8.jpg\" alt=\"Stijve printplaat\" class=\"wp-image-347\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/02\/Rigid-PCB-8.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/02\/Rigid-PCB-8-300x204.jpg 300w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">Hoe het invoegverlies bij het ontwerpen van printplaten te schatten<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">In practice, engineers don\u2019t calculate everything manually.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">1. Gebruik veldoplossers of simulatietools<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Tools kunnen het volgende modelleren:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>di\u00eblektrisch verlies<\/li>\n\n\n\n<li>geleidingsverlies<\/li>\n\n\n\n<li>frequentieafhankelijk gedrag<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">2. Gebruik de gegevens van de fabrikant<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Laminaatleveranciers bieden het volgende aan:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>verlies-tangens versus frequentie<\/li>\n\n\n\n<li>curves van de di\u00eblektrische constante<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Deze zijn betrouwbaarder dan algemene aannames.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">3. Controleer aan de hand van metingen<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Voor kritische ontwerpen:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>TDR (tijddomeinreflectometrie)<\/li>\n\n\n\n<li>VNA (vector-netwerkanalysator)<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Uit meetgegevens komen vaak zaken naar voren die in simulaties over het hoofd worden gezien.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Praktische opmerkingen over het ontwerp<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Sommige patronen komen steeds weer terug:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Het wisselen van materiaal heeft meer invloed dan het aanpassen van de spoorbreedte<\/li>\n\n\n\n<li>het verlies wordt sneller zichtbaar dan verwacht naarmate de frequentie toeneemt<\/li>\n\n\n\n<li>De nauwkeurigheid van de simulatie hangt sterk af van de materiaalmodellen<\/li>\n\n\n\n<li>Als je de ruwheid van koper buiten beschouwing laat, leidt dat tot te optimistische resultaten<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Conclusie<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Invoegverlies in printplaten is voornamelijk het gevolg van di\u00eblektrisch verlies en geleiderverlies.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">FR4 is geschikt voor veel ontwerpen, maar naarmate de frequentie toeneemt, worden beide soorten verlies steeds belangrijker. De materiaalkeuze, de opbouw van de printplaat en de geometrie van de sporen spelen allemaal een rol bij het beheersen van signaalverzwakking.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The goal isn\u2019t zero loss\u2014it\u2019s predictable loss that stays within your system margin.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">FAQ<\/h2>\n\n\n\n<div class=\"schema-faq wp-block-yoast-faq-block\"><div class=\"schema-faq-section\" id=\"faq-question-1774455135234\"><strong class=\"schema-faq-question\">Wat is het invoegverlies van een printplaat?<\/strong> <p class=\"schema-faq-answer\">Invoegverlies is de afname van de signaalsterkte terwijl het signaal zich door een printbaan op een printplaat voortbeweegt; dit wordt doorgaans gemeten in dB.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1774455158705\"><strong class=\"schema-faq-question\">Wat veroorzaakt invoegverlies in printplaten?<\/strong> <p class=\"schema-faq-answer\">De belangrijkste oorzaken zijn di\u00eblektrische verliezen (materiaalabsorptie) en geleiderverliezen (koperweerstand en skin-effect).<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1774455183560\"><strong class=\"schema-faq-question\">Welk verlies is belangrijker?<\/strong> <p class=\"schema-faq-answer\">Bij hoge frequenties speelt di\u00eblektrisch verlies vaak de grootste rol, maar er is altijd sprake van geleidingsverlies.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1774455207802\"><strong class=\"schema-faq-question\">Kan het invoegverlies worden ge\u00eblimineerd?<\/strong> <p class=\"schema-faq-answer\">Nee. Dit kan alleen worden beperkt en beheerst door middel van ontwerp en materiaalkeuze.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1774455230897\"><strong class=\"schema-faq-question\">Hoe meten ingenieurs het invoegverlies?<\/strong> <p class=\"schema-faq-answer\">Met behulp van instrumenten zoals vector-netwerkanalysatoren (VNA) en tijddomeinreflectometrie (TDR).<\/p> <\/div> <\/div>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>","protected":false},"excerpt":{"rendered":"<p>Invoegverlies is een cruciale factor bij het ontwerpen van printplaten voor hoge snelheden en RF-toepassingen. Het geeft de totale signaalverzwakking langs een transmissiepad weer, die voornamelijk wordt veroorzaakt door di\u00eblektrisch verlies en geleiderverlies. In dit artikel wordt uitgelegd hoe deze verliesmechanismen werken en hoe ingenieurs hiermee rekening houden bij het ontwerpen van printplaten.<\/p>","protected":false},"author":1,"featured_media":291,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":""},"categories":[4],"tags":[45],"class_list":["post-555","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news","tag-pcb-insertion-loss"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v26.5 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>PCB Insertion Loss Explained: Dielectric Loss vs Conductor Loss<\/title>\n<meta name=\"description\" content=\"Understand PCB insertion loss, including dielectric loss and conductor loss, and how they affect signal integrity in high-speed and RF designs.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.han-sphere.com\/nl\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/\" \/>\n<meta property=\"og:locale\" content=\"nl_NL\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"PCB Insertion Loss Explained: Dielectric Loss vs Conductor Loss\" \/>\n<meta property=\"og:description\" content=\"Understand PCB insertion loss, including dielectric loss and conductor loss, and how they affect signal integrity in high-speed and RF designs.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.han-sphere.com\/nl\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/\" \/>\n<meta property=\"og:site_name\" content=\"hansphere\" \/>\n<meta property=\"article:published_time\" content=\"2026-03-31T00:02:00+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/flex-pcb-design-14.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"600\" \/>\n\t<meta property=\"og:image:height\" content=\"440\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"hansphere01\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Geschreven door\" \/>\n\t<meta name=\"twitter:data1\" content=\"hansphere01\" \/>\n\t<meta name=\"twitter:label2\" content=\"Geschatte leestijd\" \/>\n\t<meta name=\"twitter:data2\" content=\"5 minuten\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"WebPage\",\"FAQPage\"],\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/\",\"name\":\"PCB Insertion Loss Explained: Dielectric Loss vs Conductor Loss\",\"isPartOf\":{\"@id\":\"https:\/\/www.han-sphere.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/flex-pcb-design-14.jpg\",\"datePublished\":\"2026-03-31T00:02:00+00:00\",\"author\":{\"@id\":\"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422\"},\"description\":\"Understand PCB insertion loss, including dielectric loss and conductor loss, and how they affect signal integrity in high-speed and RF designs.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#breadcrumb\"},\"mainEntity\":[{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455135234\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455158705\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455183560\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455207802\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455230897\"}],\"inLanguage\":\"nl-NL\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"nl-NL\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#primaryimage\",\"url\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/flex-pcb-design-14.jpg\",\"contentUrl\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/flex-pcb-design-14.jpg\",\"width\":600,\"height\":440,\"caption\":\"flex pcb design\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.han-sphere.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"PCB Insertion Loss Explained: Dielectric Loss vs Conductor Loss\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.han-sphere.com\/#website\",\"url\":\"https:\/\/www.han-sphere.com\/\",\"name\":\"hansphere\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.han-sphere.com\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"nl-NL\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422\",\"name\":\"hansphere01\",\"sameAs\":[\"http:\/\/www.han-sphere.com\/\"],\"url\":\"https:\/\/www.han-sphere.com\/nl\/author\/hansphere01\/\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455135234\",\"position\":1,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455135234\",\"name\":\"What is PCB insertion loss?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Insertion loss is the reduction in signal strength as it travels through a PCB trace, usually measured in dB.\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455158705\",\"position\":2,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455158705\",\"name\":\"What causes insertion loss in PCBs?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The main causes are dielectric loss (material absorption) and conductor loss (copper resistance and skin effect).\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455183560\",\"position\":3,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455183560\",\"name\":\"Which loss is more important?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"At high frequencies, dielectric loss often dominates, but conductor loss is always present.\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455207802\",\"position\":4,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455207802\",\"name\":\"Can insertion loss be eliminated?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. It can only be reduced and managed through design and material selection.\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455230897\",\"position\":5,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455230897\",\"name\":\"How do engineers measure insertion loss?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Using tools like vector network analyzers (VNA) and time-domain reflectometry (TDR).\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"HowTo\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#howto-1\",\"name\":\"PCB Insertion Loss Explained: Dielectric Loss vs Conductor Loss\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/\"},\"description\":\"You can\u2019t eliminate loss\u2014but you can manage it.\",\"step\":[{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#how-to-step-1774454898247\",\"name\":\"1. Choose Lower-Loss Materials\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"This is usually the biggest lever.<br\/>switch from FR4 \u2192 low-loss FR4 \u2192 Rogers \u2192 PTFE<br\/>lower loss tangent = less dielectric loss<br\/>See <strong><a href=\\\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-vs-rogers-pcb-high-frequency-design\/\\\">FR4 vs Rogers PCB for High-Frequency Design<\/a><\/strong>\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#how-to-step-1774454937467\",\"name\":\"2. Shorten Critical Signal Paths\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Loss is proportional to length.<br\/>Simple but often overlooked:<br\/>place components closer<br\/>reduce unnecessary routing\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#how-to-step-1774454949637\",\"name\":\"3. Optimize Stackup\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Stackup affects both loss and impedance.<br\/>keep signals close to reference planes<br\/>control dielectric thickness<br\/>avoid unnecessary layer transitions<br\/>Details: <strong><a href=\\\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-pcb-stackup-design-guide\/\\\">FR4 PCB Stackup Design Guide<\/a><\/strong>\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#how-to-step-1774454976716\",\"name\":\"4. Use Smoother Copper\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Copper roughness increases conductor loss.<br\/>Many high-speed designs use:<br\/>low-profile copper<br\/>very-low-profile (VLP) copper\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#how-to-step-1774454996070\",\"name\":\"5. Control Trace Geometry\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Wider traces \u2192 lower resistance \u2192 lower conductor loss<br\/>But this must be balanced with impedance requirements.\"}]}],\"inLanguage\":\"nl-NL\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Uitleg over het invoegverlies bij printplaten: di\u00eblektrisch verlies versus geleidingsverlies","description":"Krijg inzicht in het invoegverlies van printplaten, waaronder di\u00eblektrisch verlies en geleiderverlies, en hoe deze de signaalintegriteit be\u00efnvloeden in ontwerpen voor hoge snelheden en RF-toepassingen.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.han-sphere.com\/nl\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/","og_locale":"nl_NL","og_type":"article","og_title":"PCB Insertion Loss Explained: Dielectric Loss vs Conductor Loss","og_description":"Understand PCB insertion loss, including dielectric loss and conductor loss, and how they affect signal integrity in high-speed and RF designs.","og_url":"https:\/\/www.han-sphere.com\/nl\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/","og_site_name":"hansphere","article_published_time":"2026-03-31T00:02:00+00:00","og_image":[{"width":600,"height":440,"url":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/flex-pcb-design-14.jpg","type":"image\/jpeg"}],"author":"hansphere01","twitter_card":"summary_large_image","twitter_misc":{"Geschreven door":"hansphere01","Geschatte leestijd":"5 minuten"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["WebPage","FAQPage"],"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/","url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/","name":"Uitleg over het invoegverlies bij printplaten: di\u00eblektrisch verlies versus geleidingsverlies","isPartOf":{"@id":"https:\/\/www.han-sphere.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#primaryimage"},"image":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#primaryimage"},"thumbnailUrl":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/flex-pcb-design-14.jpg","datePublished":"2026-03-31T00:02:00+00:00","author":{"@id":"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422"},"description":"Krijg inzicht in het invoegverlies van printplaten, waaronder di\u00eblektrisch verlies en geleiderverlies, en hoe deze de signaalintegriteit be\u00efnvloeden in ontwerpen voor hoge snelheden en RF-toepassingen.","breadcrumb":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#breadcrumb"},"mainEntity":[{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455135234"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455158705"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455183560"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455207802"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455230897"}],"inLanguage":"nl-NL","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/"]}]},{"@type":"ImageObject","inLanguage":"nl-NL","@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#primaryimage","url":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/flex-pcb-design-14.jpg","contentUrl":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/flex-pcb-design-14.jpg","width":600,"height":440,"caption":"flex pcb design"},{"@type":"BreadcrumbList","@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.han-sphere.com\/"},{"@type":"ListItem","position":2,"name":"PCB Insertion Loss Explained: Dielectric Loss vs Conductor Loss"}]},{"@type":"WebSite","@id":"https:\/\/www.han-sphere.com\/#website","url":"https:\/\/www.han-sphere.com\/","name":"hansphere","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.han-sphere.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"nl-NL"},{"@type":"Person","@id":"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422","name":"hansphere01","sameAs":["http:\/\/www.han-sphere.com\/"],"url":"https:\/\/www.han-sphere.com\/nl\/author\/hansphere01\/"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455135234","position":1,"url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455135234","name":"Wat is het invoegverlies van een printplaat?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Insertion loss is the reduction in signal strength as it travels through a PCB trace, usually measured in dB.","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455158705","position":2,"url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455158705","name":"Wat veroorzaakt invoegverlies in printplaten?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"The main causes are dielectric loss (material absorption) and conductor loss (copper resistance and skin effect).","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455183560","position":3,"url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455183560","name":"Welk verlies is belangrijker?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"At high frequencies, dielectric loss often dominates, but conductor loss is always present.","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455207802","position":4,"url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455207802","name":"Kan het invoegverlies worden ge\u00eblimineerd?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"No. It can only be reduced and managed through design and material selection.","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455230897","position":5,"url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#faq-question-1774455230897","name":"Hoe meten ingenieurs het invoegverlies?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Using tools like vector network analyzers (VNA) and time-domain reflectometry (TDR).","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"HowTo","@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#howto-1","name":"Uitleg over het invoegverlies bij printplaten: di\u00eblektrisch verlies versus geleidingsverlies","mainEntityOfPage":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/"},"description":"You can\u2019t eliminate loss\u2014but you can manage it.","step":[{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#how-to-step-1774454898247","name":"1. Choose Lower-Loss Materials","itemListElement":[{"@type":"HowToDirection","text":"This is usually the biggest lever.<br\/>switch from FR4 \u2192 low-loss FR4 \u2192 Rogers \u2192 PTFE<br\/>lower loss tangent = less dielectric loss<br\/>See <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-vs-rogers-pcb-high-frequency-design\/\">FR4 vs Rogers PCB for High-Frequency Design<\/a><\/strong>"}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#how-to-step-1774454937467","name":"2. Shorten Critical Signal Paths","itemListElement":[{"@type":"HowToDirection","text":"Loss is proportional to length.<br\/>Simple but often overlooked:<br\/>place components closer<br\/>reduce unnecessary routing"}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#how-to-step-1774454949637","name":"3. Optimize Stackup","itemListElement":[{"@type":"HowToDirection","text":"Stackup affects both loss and impedance.<br\/>keep signals close to reference planes<br\/>control dielectric thickness<br\/>avoid unnecessary layer transitions<br\/>Details: <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-pcb-stackup-design-guide\/\">FR4 PCB Stackup Design Guide<\/a><\/strong>"}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#how-to-step-1774454976716","name":"4. Use Smoother Copper","itemListElement":[{"@type":"HowToDirection","text":"Copper roughness increases conductor loss.<br\/>Many high-speed designs use:<br\/>low-profile copper<br\/>very-low-profile (VLP) copper"}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/#how-to-step-1774454996070","name":"5. Control Trace Geometry","itemListElement":[{"@type":"HowToDirection","text":"Wider traces \u2192 lower resistance \u2192 lower conductor loss<br\/>But this must be balanced with impedance requirements."}]}],"inLanguage":"nl-NL"}]}},"_links":{"self":[{"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/posts\/555","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/comments?post=555"}],"version-history":[{"count":1,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/posts\/555\/revisions"}],"predecessor-version":[{"id":556,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/posts\/555\/revisions\/556"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/media\/291"}],"wp:attachment":[{"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/media?parent=555"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/categories?post=555"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/tags?post=555"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}