{"id":625,"date":"2026-04-24T08:54:00","date_gmt":"2026-04-24T00:54:00","guid":{"rendered":"https:\/\/www.han-sphere.com\/?p=625"},"modified":"2026-04-21T22:15:59","modified_gmt":"2026-04-21T14:15:59","slug":"controlled-impedance-pcb-design-50ohm-100ohm","status":"publish","type":"post","link":"https:\/\/www.han-sphere.com\/nl\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/","title":{"rendered":"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9"},"content":{"rendered":"<p class=\"wp-block-paragraph\">At some point in high-speed design, \u201crough routing\u201d stops working.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Je begint het volgende te zien:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>overpeinzingen<\/li>\n\n\n\n<li>signaalvervorming<\/li>\n\n\n\n<li>onbetrouwbare links<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">That\u2019s when impedance control becomes necessary.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">De meeste ontwerpen zijn gericht op:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>50\u03a9<\/strong> (single-ended)<\/li>\n\n\n\n<li><strong>100\u03a9 differential<\/strong> (gekoppelde signalen)<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Getting there is not just about trace width\u2014it\u2019s a combination of stackup, materials, and manufacturing tolerances.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"436\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance.jpg\" alt=\"Gecontroleerde impedantie\" class=\"wp-image-626\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-300x218.jpg 300w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-18x12.jpg 18w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">Wat is geregelde impedantie?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Controlled impedance means designing PCB traces so that their characteristic impedance stays within a specified tolerance (for example, 50\u03a9 \u00b110%).<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Dat hangt af van:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>lijnbreedte<\/li>\n\n\n\n<li>spoorbreedte<\/li>\n\n\n\n<li>di\u00eblektrische dikte<\/li>\n\n\n\n<li>di\u00eblektrische constante (Er)<\/li>\n\n\n\n<li>referentievlak<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Als een van deze factoren verandert, verandert de impedantie.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Achtergrondinformatie over Er: <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/\">Uitleg over de di\u00eblektrische constante (Er) van FR4 versus frequentie<\/a><\/strong><\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Why 50\u03a9 and 100\u03a9?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Deze waarden zijn niet willekeurig.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>50\u03a9<\/strong> is een gangbare norm voor single-ended RF- en hogesnelheidssignalen<\/li>\n\n\n\n<li><strong>100\u03a9 differential<\/strong> wordt veel gebruikt voor interfaces zoals LVDS, USB en Ethernet<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Ze vormen een evenwicht tussen:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>signaalverlies<\/li>\n\n\n\n<li>vermogen<\/li>\n\n\n\n<li>produceerbaarheid<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Veelvoorkomende constructies voor transmissielijnen<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">De impedantie hangt sterk af van de opbouw.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Microstrip (buitenste laag)<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>spoor op de buitenste laag<\/li>\n\n\n\n<li>referentievlak hieronder<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Voordelen:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>eenvoudig te leggen<\/li>\n\n\n\n<li>toegankelijk<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Nadelen:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>meer EMI<\/li>\n\n\n\n<li>milieubewuster<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Stripline (binnenste laag)<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>lijn tussen twee referentievlakken<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Voordelen:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>betere afscherming<\/li>\n\n\n\n<li>lagere EMI<\/li>\n\n\n\n<li>een stabielere impedantie<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Nadelen:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>moeilijker toegankelijk<\/li>\n\n\n\n<li>strengere controle op de fabricage<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Basisprincipes van stackup: <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-pcb-stackup-design-guide\/\">Ontwerphandleiding voor FR4-printplaatopbouw<\/a><\/strong><\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"430\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-1.jpg\" alt=\"Gecontroleerde impedantie\" class=\"wp-image-627\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-1.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-1-300x215.jpg 300w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-1-18x12.jpg 18w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">Belangrijke factoren die de impedantie be\u00efnvloeden<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">1. Lijnbreedte<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Wider trace \u2192 lower impedance<br>Narrower trace \u2192 higher impedance<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">2. Dikte van het di\u00eblektricum<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Greater distance to plane \u2192 higher impedance<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">3. Di\u00eblektrische constante (Er)<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Higher Er \u2192 lower impedance<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">4. Dikte van het koper<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Dikker koper zorgt voor een lichte daling van de impedantie<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">5. Kwaliteit van het referentievlak<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Voor een stabiele impedantie is een continu vlak vereist.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Gegevens over het retourtraject: <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-return-path-ground-plane-high-speed-design\/\">Retourpad en aardvlak op printplaten bij ontwerpen voor hoge snelheden<\/a><\/strong><\/p>\n\n\n\n<h2 class=\"wp-block-heading\">50\u03a9 vs 100\u03a9 Differential (Quick Comparison)<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Parameter<\/th><th>50\u03a9 Single-Ended<\/th><th>100\u03a9 Differential<\/th><\/tr><\/thead><tbody><tr><td>Signaaltype<\/td><td>\u00e9\u00e9n regel<\/td><td>gepaarde lijnen<\/td><\/tr><tr><td>gevoeligheid<\/td><td>gematigd<\/td><td>hoger<\/td><\/tr><tr><td>routeringscomplexiteit<\/td><td>lager<\/td><td>hoger<\/td><\/tr><tr><td>stoorvastheid<\/td><td>lager<\/td><td>hoger<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Differenti\u00eble paren zijn afhankelijk van een nauwe koppeling tussen de twee sporen.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Hoe een gecontroleerde impedantie te realiseren<\/h2>\n\n\n\n<div class=\"schema-how-to wp-block-yoast-how-to-block\"><p class=\"schema-how-to-description\">Dit is waar ontwerpen slagen of mislukken.<\/p> <ol class=\"schema-how-to-steps\"><li class=\"schema-how-to-step\" id=\"how-to-step-1776779901800\"><strong class=\"schema-how-to-step-name\">1. Begin met Stackup (niet met Routing)<\/strong> <p class=\"schema-how-to-step-text\">Definitie:<br\/>.laagindeling<br\/>.dikte van het di\u00eblektricum<br\/>.materiaalsoort<br\/>.voordat je iets doorstuurt.<br\/>If the stackup is wrong, trace tuning won\u2019t fix it.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1776779941788\"><strong class=\"schema-how-to-step-name\">2. Gebruik impedantiecalculators of veldoplossers<\/strong> <p class=\"schema-how-to-step-text\">De tools schatten de geometrie van het spoor op basis van:<br\/>.doelimpedantie<br\/>.materiaaleigenschappen<br\/>Maar onthoud: hulpmiddelen zijn slechts benaderingen.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1776779953619\"><strong class=\"schema-how-to-step-name\">3. Neem in een vroeg stadium contact op met uw printplaatfabrikant<\/strong> <p class=\"schema-how-to-step-text\">This step is often skipped\u2014and causes problems later.<br\/>Fabrikanten bieden het volgende aan:<br\/>.werkelijke laminaatgegevens<br\/>.haalbare toleranties<br\/>.impedantietabellen<br\/>Ze kunnen de opbouw aanpassen om je doel te bereiken.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1776779979597\"><strong class=\"schema-how-to-step-name\">4. Geometrie van het differenti\u00eble paar regelen<\/strong> <p class=\"schema-how-to-step-text\">For 100\u03a9 differential:<br\/>. De afstand tussen de sporen is net zo belangrijk als de breedte<br\/>. tighter spacing \u2192 lower differential impedance<br\/>Bewaar ook:<br\/>. gelijke lengte<br\/>. gelijkmatige spati\u00ebring<br\/>. minimale scheefheid<br\/>Overwegingen met betrekking tot overspraak: <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/\">Uitleg over overspraak in printplaten (overspraak aan de nabije kant versus overspraak aan de verre kant)<\/a><\/strong><\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1776780011839\"><strong class=\"schema-how-to-step-name\">5. Zorg ervoor dat referentievlakken continu blijven<\/strong> <p class=\"schema-how-to-step-text\">Vermijd:<br\/>. vliegtuig breekt in twee\u00ebn<br\/>. routing door holtes heen<br\/>Deze onderbreken de impedantiecontinu\u00efteit.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1776780032147\"><strong class=\"schema-how-to-step-name\">6. Houd rekening met fabricagetoleranties<\/strong> <p class=\"schema-how-to-step-text\">Echte borden lopen uiteen.<br\/>Typische tolerantie:<br\/>. \u00b15% to \u00b110% impedance<br\/>Pas de marges dus dienovereenkomstig aan.<\/p> <\/li><\/ol><\/div>\n\n\n\n<h2 class=\"wp-block-heading\">Veelgemaakte fouten<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Deze komen vaak voor:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>het bepalen van de impedantie na het routeren<\/li>\n\n\n\n<li>zonder rekening te houden met variaties in prepreg<\/li>\n\n\n\n<li>uitsluitend uitgaan van algemene Er-waarden<\/li>\n\n\n\n<li>niet bij de fabrikant nagevraagd<\/li>\n\n\n\n<li>onderbreking van terugleidingen met via\u2019s of splitsingen<\/li>\n<\/ul>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"448\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-3.jpg\" alt=\"Gecontroleerde impedantie\" class=\"wp-image-628\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-3.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-3-300x224.jpg 300w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-3-16x12.jpg 16w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">Hoe de impedantie te controleren<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">You don\u2019t just \u201ctrust the design\u201d.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">1. Simulatie<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Veldoplossers schatten de impedantie en het verlies.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">2. Testmonsters voor fabricage<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Fabrikanten voorzien het paneel van impedantieteststructuren.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">3. Meting<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>TDR (tijddomeinreflectometrie)<\/li>\n\n\n\n<li>instrumenten voor impedantiemeting<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Deze bevestigen de werkelijke resultaten.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Praktische ontwerpaanwijzingen<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Uit echte projecten:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Beslissingen over de opbouw zijn belangrijker dan kleine aanpassingen aan het trace-traject<\/li>\n\n\n\n<li>de binnenste lagen zijn stabieler dan de buitenste lagen<\/li>\n\n\n\n<li>Kleine afwijkingen in de afstand kunnen de differenti\u00eble impedantie verstoren<\/li>\n\n\n\n<li>Communicatie met de printplaatfabrikant bespaart tijd<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Conclusie<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Een ontwerp met geregelde impedantie is een combinatie van geometrie, materialen en productiecontrole.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">50\u03a9 and 100\u03a9 targets are achievable, but only when stackup, routing, and fabrication are aligned. The earlier impedance is considered in the design process, the easier it is to meet performance requirements.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">FAQ<\/h2>\n\n\n\n<div class=\"schema-faq wp-block-yoast-faq-block\"><div class=\"schema-faq-section\" id=\"faq-question-1776780183671\"><strong class=\"schema-faq-question\">V: Wat is geregelde impedantie bij het ontwerpen van printplaten?<\/strong> <p class=\"schema-faq-answer\">A: Dit houdt in dat er geleidingsbanen worden ontworpen om een bepaalde impedantiewaarde binnen de tolerantie te houden.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1776780194981\"><strong class=\"schema-faq-question\">Q: Why is 50\u03a9 commonly used?<\/strong> <p class=\"schema-faq-answer\">A: Het biedt voor veel toepassingen een evenwicht tussen signaalintegriteit en produceerbaarheid.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1776780205835\"><strong class=\"schema-faq-question\">Q: Why are differential pairs 100\u03a9?<\/strong> <p class=\"schema-faq-answer\">A: Omdat twee gekoppelde signaalbanen samen een standaard differenti\u00eble impedantie vormen die in veel interfaces wordt gebruikt.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1776780222747\"><strong class=\"schema-faq-question\">V: Kan de impedantie na het routeren nog worden aangepast?<\/strong> <p class=\"schema-faq-answer\">A: Dat is niet eenvoudig. Meestal zijn er aanpassingen aan de opbouw of de geometrie nodig.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1776780251609\"><strong class=\"schema-faq-question\">V: Hoe nauwkeurig is impedantieregeling?<\/strong> <p class=\"schema-faq-answer\">A: Typically within \u00b15% to \u00b110%, depending on manufacturing capability.<\/p> <\/div> <\/div>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>","protected":false},"excerpt":{"rendered":"<p>Controlled impedance is essential in high-speed PCB design to ensure signal integrity and minimize reflections. This article explains how engineers achieve 50\u03a9 and 100\u03a9 impedance through stackup design, trace geometry, and collaboration with PCB manufacturers.<\/p>","protected":false},"author":1,"featured_media":629,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":""},"categories":[4],"tags":[10],"class_list":["post-625","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news","tag-pcb-design"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v26.5 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9<\/title>\n<meta name=\"description\" content=\"Learn how to design controlled impedance PCBs for 50\u03a9 single-ended and 100\u03a9 differential signals, including stackup, trace width, and practical tips.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.han-sphere.com\/nl\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/\" \/>\n<meta property=\"og:locale\" content=\"nl_NL\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9\" \/>\n<meta property=\"og:description\" content=\"Learn how to design controlled impedance PCBs for 50\u03a9 single-ended and 100\u03a9 differential signals, including stackup, trace width, and practical tips.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.han-sphere.com\/nl\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/\" \/>\n<meta property=\"og:site_name\" content=\"hansphere\" \/>\n<meta property=\"article:published_time\" content=\"2026-04-24T00:54:00+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-2.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"600\" \/>\n\t<meta property=\"og:image:height\" content=\"444\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"hansphere01\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Geschreven door\" \/>\n\t<meta name=\"twitter:data1\" content=\"hansphere01\" \/>\n\t<meta name=\"twitter:label2\" content=\"Geschatte leestijd\" \/>\n\t<meta name=\"twitter:data2\" content=\"4 minuten\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"WebPage\",\"FAQPage\"],\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/\",\"name\":\"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9\",\"isPartOf\":{\"@id\":\"https:\/\/www.han-sphere.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-2.jpg\",\"datePublished\":\"2026-04-24T00:54:00+00:00\",\"author\":{\"@id\":\"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422\"},\"description\":\"Learn how to design controlled impedance PCBs for 50\u03a9 single-ended and 100\u03a9 differential signals, including stackup, trace width, and practical tips.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#breadcrumb\"},\"mainEntity\":[{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780183671\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780194981\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780205835\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780222747\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780251609\"}],\"inLanguage\":\"nl-NL\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"nl-NL\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#primaryimage\",\"url\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-2.jpg\",\"contentUrl\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-2.jpg\",\"width\":600,\"height\":444,\"caption\":\"Controlled Impedance\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.han-sphere.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.han-sphere.com\/#website\",\"url\":\"https:\/\/www.han-sphere.com\/\",\"name\":\"hansphere\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.han-sphere.com\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"nl-NL\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422\",\"name\":\"hansphere01\",\"sameAs\":[\"http:\/\/www.han-sphere.com\/\"],\"url\":\"https:\/\/www.han-sphere.com\/nl\/author\/hansphere01\/\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780183671\",\"position\":1,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780183671\",\"name\":\"Q: What is controlled impedance in PCB design?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A: It means designing traces to maintain a specific impedance value within tolerance.\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780194981\",\"position\":2,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780194981\",\"name\":\"Q: Why is 50\u03a9 commonly used?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A: It provides a balance between signal integrity and manufacturability for many applications.\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780205835\",\"position\":3,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780205835\",\"name\":\"Q: Why are differential pairs 100\u03a9?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A: Because two coupled traces combine to create a standard differential impedance used in many interfaces.\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780222747\",\"position\":4,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780222747\",\"name\":\"Q: Can impedance be fixed after routing?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A: Not easily. It usually requires stackup or geometry changes.\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780251609\",\"position\":5,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780251609\",\"name\":\"Q: How accurate is impedance control?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A: Typically within \u00b15% to \u00b110%, depending on manufacturing capability.\",\"inLanguage\":\"nl-NL\"},\"inLanguage\":\"nl-NL\"},{\"@type\":\"HowTo\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#howto-1\",\"name\":\"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/\"},\"description\":\"This is where designs succeed or fail.\",\"step\":[{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776779901800\",\"name\":\"1. Start with Stackup (Not Routing)\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Define:<br\/>.layer structure<br\/>.dielectric thickness<br\/>.material type<br\/>.before routing anything.<br\/>If the stackup is wrong, trace tuning won\u2019t fix it.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776779941788\",\"name\":\"2. Use Impedance Calculators or Field Solvers\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Tools estimate trace geometry based on:<br\/>.target impedance<br\/>.material properties<br\/>But remember: tools are approximations.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776779953619\",\"name\":\"3. Work with Your PCB Manufacturer Early\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"This step is often skipped\u2014and causes problems later.<br\/>Manufacturers provide:<br\/>.actual laminate data<br\/>.achievable tolerances<br\/>.impedance tables<br\/>They can adjust stackup to hit your target.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776779979597\",\"name\":\"4. Control Differential Pair Geometry\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"For 100\u03a9 differential:<br\/>. spacing between traces matters as much as width<br\/>. tighter spacing \u2192 lower differential impedance<br\/>Also keep:<br\/>. equal length<br\/>. consistent spacing<br\/>. minimal skew<br\/>Crosstalk considerations: <strong><a href=\\\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/\\\">PCB Crosstalk Explained (Near-End vs Far-End Crosstalk<\/a><\/strong>\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776780011839\",\"name\":\"5. Maintain Continuous Reference Planes\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Avoid:<br\/>. plane splits<br\/>. routing across voids<br\/>These break impedance continuity.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776780032147\",\"name\":\"6. Account for Manufacturing Tolerances\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Real boards vary.<br\/>Typical tolerance:<br\/>. \u00b15% to \u00b110% impedance<br\/>So design margins accordingly.\"}]}],\"inLanguage\":\"nl-NL\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9","description":"Learn how to design controlled impedance PCBs for 50\u03a9 single-ended and 100\u03a9 differential signals, including stackup, trace width, and practical tips.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.han-sphere.com\/nl\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/","og_locale":"nl_NL","og_type":"article","og_title":"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9","og_description":"Learn how to design controlled impedance PCBs for 50\u03a9 single-ended and 100\u03a9 differential signals, including stackup, trace width, and practical tips.","og_url":"https:\/\/www.han-sphere.com\/nl\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/","og_site_name":"hansphere","article_published_time":"2026-04-24T00:54:00+00:00","og_image":[{"width":600,"height":444,"url":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-2.jpg","type":"image\/jpeg"}],"author":"hansphere01","twitter_card":"summary_large_image","twitter_misc":{"Geschreven door":"hansphere01","Geschatte leestijd":"4 minuten"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["WebPage","FAQPage"],"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/","url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/","name":"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9","isPartOf":{"@id":"https:\/\/www.han-sphere.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#primaryimage"},"image":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#primaryimage"},"thumbnailUrl":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-2.jpg","datePublished":"2026-04-24T00:54:00+00:00","author":{"@id":"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422"},"description":"Learn how to design controlled impedance PCBs for 50\u03a9 single-ended and 100\u03a9 differential signals, including stackup, trace width, and practical tips.","breadcrumb":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#breadcrumb"},"mainEntity":[{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780183671"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780194981"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780205835"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780222747"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780251609"}],"inLanguage":"nl-NL","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/"]}]},{"@type":"ImageObject","inLanguage":"nl-NL","@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#primaryimage","url":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-2.jpg","contentUrl":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-2.jpg","width":600,"height":444,"caption":"Controlled Impedance"},{"@type":"BreadcrumbList","@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.han-sphere.com\/"},{"@type":"ListItem","position":2,"name":"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9"}]},{"@type":"WebSite","@id":"https:\/\/www.han-sphere.com\/#website","url":"https:\/\/www.han-sphere.com\/","name":"hansphere","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.han-sphere.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"nl-NL"},{"@type":"Person","@id":"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422","name":"hansphere01","sameAs":["http:\/\/www.han-sphere.com\/"],"url":"https:\/\/www.han-sphere.com\/nl\/author\/hansphere01\/"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780183671","position":1,"url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780183671","name":"V: Wat is geregelde impedantie bij het ontwerpen van printplaten?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"A: It means designing traces to maintain a specific impedance value within tolerance.","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780194981","position":2,"url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780194981","name":"Q: Why is 50\u03a9 commonly used?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"A: It provides a balance between signal integrity and manufacturability for many applications.","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780205835","position":3,"url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780205835","name":"Q: Why are differential pairs 100\u03a9?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"A: Because two coupled traces combine to create a standard differential impedance used in many interfaces.","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780222747","position":4,"url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780222747","name":"V: Kan de impedantie na het routeren nog worden aangepast?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"A: Not easily. It usually requires stackup or geometry changes.","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780251609","position":5,"url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780251609","name":"V: Hoe nauwkeurig is impedantieregeling?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"A: Typically within \u00b15% to \u00b110%, depending on manufacturing capability.","inLanguage":"nl-NL"},"inLanguage":"nl-NL"},{"@type":"HowTo","@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#howto-1","name":"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9","mainEntityOfPage":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/"},"description":"Dit is waar ontwerpen slagen of mislukken.","step":[{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776779901800","name":"1. Start with Stackup (Not Routing)","itemListElement":[{"@type":"HowToDirection","text":"Define:<br\/>.layer structure<br\/>.dielectric thickness<br\/>.material type<br\/>.before routing anything.<br\/>If the stackup is wrong, trace tuning won\u2019t fix it."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776779941788","name":"2. Use Impedance Calculators or Field Solvers","itemListElement":[{"@type":"HowToDirection","text":"Tools estimate trace geometry based on:<br\/>.target impedance<br\/>.material properties<br\/>But remember: tools are approximations."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776779953619","name":"3. Work with Your PCB Manufacturer Early","itemListElement":[{"@type":"HowToDirection","text":"This step is often skipped\u2014and causes problems later.<br\/>Manufacturers provide:<br\/>.actual laminate data<br\/>.achievable tolerances<br\/>.impedance tables<br\/>They can adjust stackup to hit your target."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776779979597","name":"4. Control Differential Pair Geometry","itemListElement":[{"@type":"HowToDirection","text":"For 100\u03a9 differential:<br\/>. spacing between traces matters as much as width<br\/>. tighter spacing \u2192 lower differential impedance<br\/>Also keep:<br\/>. equal length<br\/>. consistent spacing<br\/>. minimal skew<br\/>Crosstalk considerations: <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/\">PCB Crosstalk Explained (Near-End vs Far-End Crosstalk<\/a><\/strong>"}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776780011839","name":"5. Maintain Continuous Reference Planes","itemListElement":[{"@type":"HowToDirection","text":"Avoid:<br\/>. plane splits<br\/>. routing across voids<br\/>These break impedance continuity."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776780032147","name":"6. Account for Manufacturing Tolerances","itemListElement":[{"@type":"HowToDirection","text":"Real boards vary.<br\/>Typical tolerance:<br\/>. \u00b15% to \u00b110% impedance<br\/>So design margins accordingly."}]}],"inLanguage":"nl-NL"}]}},"_links":{"self":[{"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/posts\/625","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/comments?post=625"}],"version-history":[{"count":2,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/posts\/625\/revisions"}],"predecessor-version":[{"id":632,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/posts\/625\/revisions\/632"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/media\/629"}],"wp:attachment":[{"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/media?parent=625"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/categories?post=625"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.han-sphere.com\/nl\/wp-json\/wp\/v2\/tags?post=625"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}