{"id":625,"date":"2026-04-24T08:54:00","date_gmt":"2026-04-24T00:54:00","guid":{"rendered":"https:\/\/www.han-sphere.com\/?p=625"},"modified":"2026-04-21T22:15:59","modified_gmt":"2026-04-21T14:15:59","slug":"controlled-impedance-pcb-design-50ohm-100ohm","status":"publish","type":"post","link":"https:\/\/www.han-sphere.com\/sv\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/","title":{"rendered":"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9"},"content":{"rendered":"<p class=\"wp-block-paragraph\">At some point in high-speed design, \u201crough routing\u201d stops working.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Man b\u00f6rjar se:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>reflektioner<\/li>\n\n\n\n<li>signalf\u00f6rvr\u00e4ngning<\/li>\n\n\n\n<li>instabila l\u00e4nkar<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">That\u2019s when impedance control becomes necessary.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">De flesta designerna riktar sig till:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>50\u03a9<\/strong> (enkelansluten)<\/li>\n\n\n\n<li><strong>100\u03a9 differential<\/strong> (parvisa signaler)<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Getting there is not just about trace width\u2014it\u2019s a combination of stackup, materials, and manufacturing tolerances.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"436\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance.jpg\" alt=\"Kontrollerad impedans\" class=\"wp-image-626\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-300x218.jpg 300w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-18x12.jpg 18w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">Vad \u00e4r kontrollerad impedans?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Controlled impedance means designing PCB traces so that their characteristic impedance stays within a specified tolerance (for example, 50\u03a9 \u00b110%).<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Det beror p\u00e5:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>linjebredd<\/li>\n\n\n\n<li>sp\u00e5rtjocklek<\/li>\n\n\n\n<li>dielektrisk tjocklek<\/li>\n\n\n\n<li>dielektricitetskonstant (Er)<\/li>\n\n\n\n<li>referensplan<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Om n\u00e5gon av dessa f\u00f6r\u00e4ndras, f\u00f6r\u00e4ndras impedansen.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Bakgrundsinformation om Er: <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/\">F\u00f6rklaring av FR4:s dielektricitetskonstant (Er) i f\u00f6rh\u00e5llande till frekvensen<\/a><\/strong><\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Why 50\u03a9 and 100\u03a9?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Dessa v\u00e4rden \u00e4r inte slumpm\u00e4ssiga.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>50\u03a9<\/strong> \u00e4r en vanlig standard f\u00f6r single-ended RF-signaler och h\u00f6ghastighetssignaler<\/li>\n\n\n\n<li><strong>100\u03a9 differential<\/strong> anv\u00e4nds ofta f\u00f6r gr\u00e4nssnitt som LVDS, USB och Ethernet<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">De utg\u00f6r en balans mellan:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>signalf\u00f6rlust<\/li>\n\n\n\n<li>effekthantering<\/li>\n\n\n\n<li>tillverkningsbarhet<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Vanliga konstruktioner f\u00f6r kraftledningar<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Impedansen beror i h\u00f6g grad p\u00e5 skiktuppbyggnaden.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Mikrostrip (yttre skikt)<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>m\u00f6nster p\u00e5 ytskiktet<\/li>\n\n\n\n<li>referensplanet nedan<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">F\u00f6rdelar:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>l\u00e4tt att dra kablarna<\/li>\n\n\n\n<li>tillg\u00e4nglig<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Nackdelar:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>mer EMI<\/li>\n\n\n\n<li>mer milj\u00f6medveten<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Stripled (inre skikt)<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>linje mellan tv\u00e5 referensplan<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">F\u00f6rdelar:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>b\u00e4ttre avsk\u00e4rmning<\/li>\n\n\n\n<li>l\u00e4gre EMI<\/li>\n\n\n\n<li>mer stabil impedans<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Nackdelar:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>sv\u00e5rare att komma \u00e5t<\/li>\n\n\n\n<li>str\u00e4ngare tillverkningskontroll<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Grunderna i stackup: <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-pcb-stackup-design-guide\/\">Guide till utformning av FR4-kretskortets skiktuppbyggnad<\/a><\/strong><\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"430\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-1.jpg\" alt=\"Kontrollerad impedans\" class=\"wp-image-627\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-1.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-1-300x215.jpg 300w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-1-18x12.jpg 18w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">Viktiga faktorer som p\u00e5verkar impedansen<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">1. Sp\u00e5rbredd<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Wider trace \u2192 lower impedance<br>Narrower trace \u2192 higher impedance<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">2. Dielektrisk tjocklek<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Greater distance to plane \u2192 higher impedance<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">3. Dielektricitetskonstant (Er)<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Higher Er \u2192 lower impedance<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">4. Kopparens tjocklek<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Tjockare koppar s\u00e4nker impedansen n\u00e5got<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">5. Referensplanets kvalitet<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">En kontinuerlig yta kr\u00e4vs f\u00f6r att impedansen ska vara stabil.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Uppgifter om returv\u00e4gen: <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-return-path-ground-plane-high-speed-design\/\">Returv\u00e4g och jordplan p\u00e5 kretskort vid h\u00f6ghastighetsdesign<\/a><\/strong><\/p>\n\n\n\n<h2 class=\"wp-block-heading\">50\u03a9 vs 100\u03a9 Differential (Quick Comparison)<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Parameter<\/th><th>50\u03a9 Single-Ended<\/th><th>100\u03a9 Differential<\/th><\/tr><\/thead><tbody><tr><td>Signaltyp<\/td><td>en rad<\/td><td>parlinjer<\/td><\/tr><tr><td>k\u00e4nslighet<\/td><td>m\u00e5ttlig<\/td><td>h\u00f6gre<\/td><\/tr><tr><td>ruttkomplexitet<\/td><td>l\u00e4gre<\/td><td>h\u00f6gre<\/td><\/tr><tr><td>st\u00f6rningsimmunitet<\/td><td>l\u00e4gre<\/td><td>h\u00f6gre<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Differentialpar bygger p\u00e5 en n\u00e4ra koppling mellan de tv\u00e5 ledningarna.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Hur man uppn\u00e5r kontrollerad impedans<\/h2>\n\n\n\n<div class=\"schema-how-to wp-block-yoast-how-to-block\"><p class=\"schema-how-to-description\">Det \u00e4r h\u00e4r som designen antingen lyckas eller misslyckas.<\/p> <ol class=\"schema-how-to-steps\"><li class=\"schema-how-to-step\" id=\"how-to-step-1776779901800\"><strong class=\"schema-how-to-step-name\">1. B\u00f6rja med stackup (inte fr\u00e4sning)<\/strong> <p class=\"schema-how-to-step-text\">Definition:<br\/>.lagerstruktur<br\/>.dielektrisk tjocklek<br\/>.materialtyp<br\/>.innan du vidarebefordrar n\u00e5got.<br\/>If the stackup is wrong, trace tuning won\u2019t fix it.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1776779941788\"><strong class=\"schema-how-to-step-name\">2. Anv\u00e4nd impedansber\u00e4knare eller f\u00e4ltl\u00f6sare<\/strong> <p class=\"schema-how-to-step-text\">Verktygen ber\u00e4knar sp\u00e5rgeometrin utifr\u00e5n:<br\/>.m\u00e5limpedans<br\/>.materialegenskaper<br\/>Men kom ih\u00e5g: verktyg \u00e4r bara ungef\u00e4rliga hj\u00e4lpmedel.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1776779953619\"><strong class=\"schema-how-to-step-name\">3. Samarbeta med din kretskortstillverkare i ett tidigt skede<\/strong> <p class=\"schema-how-to-step-text\">This step is often skipped\u2014and causes problems later.<br\/>Tillverkarna tillhandah\u00e5ller:<br\/>.faktiska laminatdata<br\/>.uppn\u00e5eliga toleranser<br\/>.impedanstabeller<br\/>De kan anpassa sammans\u00e4ttningen s\u00e5 att den uppfyller ditt m\u00e5l.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1776779979597\"><strong class=\"schema-how-to-step-name\">4. Kontroll av geometrin hos differentialparet<\/strong> <p class=\"schema-how-to-step-text\">For 100\u03a9 differential:<br\/>. Avst\u00e5ndet mellan ledningarna \u00e4r lika viktigt som bredden<br\/>. tighter spacing \u2192 lower differential impedance<br\/>Spara \u00e4ven:<br\/>. lika l\u00e5nga<br\/>. j\u00e4mnt avst\u00e5nd<br\/>. minimal skevhet<br\/>Aspekter att beakta vid \u00f6verh\u00f6rning: <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/\">F\u00f6rklaring av korskoppling i kretskort (korskoppling i n\u00e4r\u00e4nden j\u00e4mf\u00f6rt med korskoppling i fj\u00e4rr\u00e4nden)<\/a><\/strong><\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1776780011839\"><strong class=\"schema-how-to-step-name\">5. Uppr\u00e4tth\u00e5ll kontinuerliga referensplan<\/strong> <p class=\"schema-how-to-step-text\">Undvik:<br\/>. flygplansdelningar<br\/>. ledningsdragning genom h\u00e5lrum<br\/>Dessa bryter impedanskontinuiteten.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1776780032147\"><strong class=\"schema-how-to-step-name\">6. Beakta tillverkningstoleranser<\/strong> <p class=\"schema-how-to-step-text\">Verkliga br\u00e4dor ser olika ut.<br\/>Typisk tolerans:<br\/>. \u00b15% to \u00b110% impedance<br\/>Utforma d\u00e4rf\u00f6r marginalerna d\u00e4refter.<\/p> <\/li><\/ol><\/div>\n\n\n\n<h2 class=\"wp-block-heading\">Vanliga misstag<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Dessa dyker ofta upp:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>best\u00e4mning av impedansen efter dragning<\/li>\n\n\n\n<li>utan att ta h\u00e4nsyn till variationer i prepreg<\/li>\n\n\n\n<li>att enbart f\u00f6rlita sig p\u00e5 generiska Er-v\u00e4rden<\/li>\n\n\n\n<li>utan att kontrollera med tillverkaren<\/li>\n\n\n\n<li>Att bryta returv\u00e4gar med genomg\u00e5ngsh\u00e5l eller f\u00f6rgreningar<\/li>\n<\/ul>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"448\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-3.jpg\" alt=\"Kontrollerad impedans\" class=\"wp-image-628\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-3.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-3-300x224.jpg 300w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-3-16x12.jpg 16w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">Hur man kontrollerar impedansen<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">You don\u2019t just \u201ctrust the design\u201d.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">1. Simulering<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">F\u00e4ltl\u00f6sare ber\u00e4knar impedans och f\u00f6rlust.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">2. Tillverkning av provbitar<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Tillverkarna f\u00f6rser panelen med strukturer f\u00f6r impedansm\u00e4tning.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">3. M\u00e4tning<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>TDR (reflektometri i tidsdom\u00e4nen)<\/li>\n\n\n\n<li>verktyg f\u00f6r impedansm\u00e4tning<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Dessa bekr\u00e4ftar de faktiska resultaten.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Praktiska anvisningar f\u00f6r utformning<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Fr\u00e5n verkliga projekt:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Beslut om stackuppbyggnad \u00e4r viktigare \u00e4n justeringar av sp\u00e5rningen<\/li>\n\n\n\n<li>De inre skikten \u00e4r stabilare \u00e4n de yttre skikten<\/li>\n\n\n\n<li>Sm\u00e5 avvikelser i avst\u00e5ndet kan st\u00f6ra differentialimpedansen<\/li>\n\n\n\n<li>Kommunikationen med kretskortstillverkaren sparar tid<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Slutsats<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Konstruktion med kontrollerad impedans \u00e4r en kombination av geometri, material och tillverkningskontroll.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">50\u03a9 and 100\u03a9 targets are achievable, but only when stackup, routing, and fabrication are aligned. The earlier impedance is considered in the design process, the easier it is to meet performance requirements.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">FAQ<\/h2>\n\n\n\n<div class=\"schema-faq wp-block-yoast-faq-block\"><div class=\"schema-faq-section\" id=\"faq-question-1776780183671\"><strong class=\"schema-faq-question\">Fr\u00e5ga: Vad \u00e4r kontrollerad impedans vid kretskortsdesign?<\/strong> <p class=\"schema-faq-answer\">A: Det inneb\u00e4r att man utformar ledare s\u00e5 att ett visst impedansv\u00e4rde h\u00e5lls inom toleransgr\u00e4nserna.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1776780194981\"><strong class=\"schema-faq-question\">Q: Why is 50\u03a9 commonly used?<\/strong> <p class=\"schema-faq-answer\">A: Det ger en balans mellan signalintegritet och tillverkningsbarhet f\u00f6r m\u00e5nga till\u00e4mpningar.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1776780205835\"><strong class=\"schema-faq-question\">Q: Why are differential pairs 100\u03a9?<\/strong> <p class=\"schema-faq-answer\">S: Eftersom tv\u00e5 kopplade ledare tillsammans bildar en standarddifferentialimpedans som anv\u00e4nds i m\u00e5nga gr\u00e4nssnitt.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1776780222747\"><strong class=\"schema-faq-question\">Fr\u00e5ga: Kan impedansen justeras efter dragningen?<\/strong> <p class=\"schema-faq-answer\">A: Det \u00e4r inte s\u00e5 enkelt. Det kr\u00e4ver oftast \u00e4ndringar i lageruppbyggnaden eller geometrin.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1776780251609\"><strong class=\"schema-faq-question\">Fr\u00e5ga: Hur exakt \u00e4r impedansregleringen?<\/strong> <p class=\"schema-faq-answer\">A: Typically within \u00b15% to \u00b110%, depending on manufacturing capability.<\/p> <\/div> <\/div>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>","protected":false},"excerpt":{"rendered":"<p>Controlled impedance is essential in high-speed PCB design to ensure signal integrity and minimize reflections. This article explains how engineers achieve 50\u03a9 and 100\u03a9 impedance through stackup design, trace geometry, and collaboration with PCB manufacturers.<\/p>","protected":false},"author":1,"featured_media":629,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":""},"categories":[4],"tags":[10],"class_list":["post-625","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news","tag-pcb-design"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v26.5 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9<\/title>\n<meta name=\"description\" content=\"Learn how to design controlled impedance PCBs for 50\u03a9 single-ended and 100\u03a9 differential signals, including stackup, trace width, and practical tips.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.han-sphere.com\/sv\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/\" \/>\n<meta property=\"og:locale\" content=\"sv_SE\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9\" \/>\n<meta property=\"og:description\" content=\"Learn how to design controlled impedance PCBs for 50\u03a9 single-ended and 100\u03a9 differential signals, including stackup, trace width, and practical tips.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.han-sphere.com\/sv\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/\" \/>\n<meta property=\"og:site_name\" content=\"hansphere\" \/>\n<meta property=\"article:published_time\" content=\"2026-04-24T00:54:00+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-2.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"600\" \/>\n\t<meta property=\"og:image:height\" content=\"444\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"hansphere01\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Skriven av\" \/>\n\t<meta name=\"twitter:data1\" content=\"hansphere01\" \/>\n\t<meta name=\"twitter:label2\" content=\"Ber\u00e4knad l\u00e4stid\" \/>\n\t<meta name=\"twitter:data2\" content=\"4 minuter\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"WebPage\",\"FAQPage\"],\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/\",\"name\":\"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9\",\"isPartOf\":{\"@id\":\"https:\/\/www.han-sphere.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-2.jpg\",\"datePublished\":\"2026-04-24T00:54:00+00:00\",\"author\":{\"@id\":\"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422\"},\"description\":\"Learn how to design controlled impedance PCBs for 50\u03a9 single-ended and 100\u03a9 differential signals, including stackup, trace width, and practical tips.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#breadcrumb\"},\"mainEntity\":[{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780183671\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780194981\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780205835\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780222747\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780251609\"}],\"inLanguage\":\"sv-SE\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"sv-SE\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#primaryimage\",\"url\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-2.jpg\",\"contentUrl\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-2.jpg\",\"width\":600,\"height\":444,\"caption\":\"Controlled Impedance\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.han-sphere.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.han-sphere.com\/#website\",\"url\":\"https:\/\/www.han-sphere.com\/\",\"name\":\"hansphere\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.han-sphere.com\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"sv-SE\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422\",\"name\":\"hansphere01\",\"sameAs\":[\"http:\/\/www.han-sphere.com\/\"],\"url\":\"https:\/\/www.han-sphere.com\/sv\/author\/hansphere01\/\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780183671\",\"position\":1,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780183671\",\"name\":\"Q: What is controlled impedance in PCB design?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A: It means designing traces to maintain a specific impedance value within tolerance.\",\"inLanguage\":\"sv-SE\"},\"inLanguage\":\"sv-SE\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780194981\",\"position\":2,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780194981\",\"name\":\"Q: Why is 50\u03a9 commonly used?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A: It provides a balance between signal integrity and manufacturability for many applications.\",\"inLanguage\":\"sv-SE\"},\"inLanguage\":\"sv-SE\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780205835\",\"position\":3,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780205835\",\"name\":\"Q: Why are differential pairs 100\u03a9?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A: Because two coupled traces combine to create a standard differential impedance used in many interfaces.\",\"inLanguage\":\"sv-SE\"},\"inLanguage\":\"sv-SE\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780222747\",\"position\":4,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780222747\",\"name\":\"Q: Can impedance be fixed after routing?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A: Not easily. It usually requires stackup or geometry changes.\",\"inLanguage\":\"sv-SE\"},\"inLanguage\":\"sv-SE\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780251609\",\"position\":5,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780251609\",\"name\":\"Q: How accurate is impedance control?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A: Typically within \u00b15% to \u00b110%, depending on manufacturing capability.\",\"inLanguage\":\"sv-SE\"},\"inLanguage\":\"sv-SE\"},{\"@type\":\"HowTo\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#howto-1\",\"name\":\"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/\"},\"description\":\"This is where designs succeed or fail.\",\"step\":[{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776779901800\",\"name\":\"1. Start with Stackup (Not Routing)\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Define:<br\/>.layer structure<br\/>.dielectric thickness<br\/>.material type<br\/>.before routing anything.<br\/>If the stackup is wrong, trace tuning won\u2019t fix it.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776779941788\",\"name\":\"2. Use Impedance Calculators or Field Solvers\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Tools estimate trace geometry based on:<br\/>.target impedance<br\/>.material properties<br\/>But remember: tools are approximations.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776779953619\",\"name\":\"3. Work with Your PCB Manufacturer Early\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"This step is often skipped\u2014and causes problems later.<br\/>Manufacturers provide:<br\/>.actual laminate data<br\/>.achievable tolerances<br\/>.impedance tables<br\/>They can adjust stackup to hit your target.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776779979597\",\"name\":\"4. Control Differential Pair Geometry\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"For 100\u03a9 differential:<br\/>. spacing between traces matters as much as width<br\/>. tighter spacing \u2192 lower differential impedance<br\/>Also keep:<br\/>. equal length<br\/>. consistent spacing<br\/>. minimal skew<br\/>Crosstalk considerations: <strong><a href=\\\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/\\\">PCB Crosstalk Explained (Near-End vs Far-End Crosstalk<\/a><\/strong>\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776780011839\",\"name\":\"5. Maintain Continuous Reference Planes\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Avoid:<br\/>. plane splits<br\/>. routing across voids<br\/>These break impedance continuity.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776780032147\",\"name\":\"6. Account for Manufacturing Tolerances\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Real boards vary.<br\/>Typical tolerance:<br\/>. \u00b15% to \u00b110% impedance<br\/>So design margins accordingly.\"}]}],\"inLanguage\":\"sv-SE\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9","description":"Learn how to design controlled impedance PCBs for 50\u03a9 single-ended and 100\u03a9 differential signals, including stackup, trace width, and practical tips.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.han-sphere.com\/sv\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/","og_locale":"sv_SE","og_type":"article","og_title":"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9","og_description":"Learn how to design controlled impedance PCBs for 50\u03a9 single-ended and 100\u03a9 differential signals, including stackup, trace width, and practical tips.","og_url":"https:\/\/www.han-sphere.com\/sv\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/","og_site_name":"hansphere","article_published_time":"2026-04-24T00:54:00+00:00","og_image":[{"width":600,"height":444,"url":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-2.jpg","type":"image\/jpeg"}],"author":"hansphere01","twitter_card":"summary_large_image","twitter_misc":{"Skriven av":"hansphere01","Ber\u00e4knad l\u00e4stid":"4 minuter"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["WebPage","FAQPage"],"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/","url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/","name":"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9","isPartOf":{"@id":"https:\/\/www.han-sphere.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#primaryimage"},"image":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#primaryimage"},"thumbnailUrl":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-2.jpg","datePublished":"2026-04-24T00:54:00+00:00","author":{"@id":"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422"},"description":"Learn how to design controlled impedance PCBs for 50\u03a9 single-ended and 100\u03a9 differential signals, including stackup, trace width, and practical tips.","breadcrumb":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#breadcrumb"},"mainEntity":[{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780183671"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780194981"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780205835"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780222747"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780251609"}],"inLanguage":"sv-SE","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/"]}]},{"@type":"ImageObject","inLanguage":"sv-SE","@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#primaryimage","url":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-2.jpg","contentUrl":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/04\/Controlled-Impedance-2.jpg","width":600,"height":444,"caption":"Controlled Impedance"},{"@type":"BreadcrumbList","@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.han-sphere.com\/"},{"@type":"ListItem","position":2,"name":"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9"}]},{"@type":"WebSite","@id":"https:\/\/www.han-sphere.com\/#website","url":"https:\/\/www.han-sphere.com\/","name":"hansphere","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.han-sphere.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"sv-SE"},{"@type":"Person","@id":"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422","name":"hansphere01","sameAs":["http:\/\/www.han-sphere.com\/"],"url":"https:\/\/www.han-sphere.com\/sv\/author\/hansphere01\/"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780183671","position":1,"url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780183671","name":"Fr\u00e5ga: Vad \u00e4r kontrollerad impedans vid kretskortsdesign?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"A: It means designing traces to maintain a specific impedance value within tolerance.","inLanguage":"sv-SE"},"inLanguage":"sv-SE"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780194981","position":2,"url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780194981","name":"Q: Why is 50\u03a9 commonly used?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"A: It provides a balance between signal integrity and manufacturability for many applications.","inLanguage":"sv-SE"},"inLanguage":"sv-SE"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780205835","position":3,"url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780205835","name":"Q: Why are differential pairs 100\u03a9?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"A: Because two coupled traces combine to create a standard differential impedance used in many interfaces.","inLanguage":"sv-SE"},"inLanguage":"sv-SE"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780222747","position":4,"url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780222747","name":"Fr\u00e5ga: Kan impedansen justeras efter dragningen?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"A: Not easily. It usually requires stackup or geometry changes.","inLanguage":"sv-SE"},"inLanguage":"sv-SE"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780251609","position":5,"url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#faq-question-1776780251609","name":"Fr\u00e5ga: Hur exakt \u00e4r impedansregleringen?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"A: Typically within \u00b15% to \u00b110%, depending on manufacturing capability.","inLanguage":"sv-SE"},"inLanguage":"sv-SE"},{"@type":"HowTo","@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#howto-1","name":"Controlled Impedance PCB Design: How to Achieve 50\u03a9 and 100\u03a9","mainEntityOfPage":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/"},"description":"Det \u00e4r h\u00e4r som designen antingen lyckas eller misslyckas.","step":[{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776779901800","name":"1. Start with Stackup (Not Routing)","itemListElement":[{"@type":"HowToDirection","text":"Define:<br\/>.layer structure<br\/>.dielectric thickness<br\/>.material type<br\/>.before routing anything.<br\/>If the stackup is wrong, trace tuning won\u2019t fix it."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776779941788","name":"2. Use Impedance Calculators or Field Solvers","itemListElement":[{"@type":"HowToDirection","text":"Tools estimate trace geometry based on:<br\/>.target impedance<br\/>.material properties<br\/>But remember: tools are approximations."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776779953619","name":"3. Work with Your PCB Manufacturer Early","itemListElement":[{"@type":"HowToDirection","text":"This step is often skipped\u2014and causes problems later.<br\/>Manufacturers provide:<br\/>.actual laminate data<br\/>.achievable tolerances<br\/>.impedance tables<br\/>They can adjust stackup to hit your target."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776779979597","name":"4. Control Differential Pair Geometry","itemListElement":[{"@type":"HowToDirection","text":"For 100\u03a9 differential:<br\/>. spacing between traces matters as much as width<br\/>. tighter spacing \u2192 lower differential impedance<br\/>Also keep:<br\/>. equal length<br\/>. consistent spacing<br\/>. minimal skew<br\/>Crosstalk considerations: <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/\">PCB Crosstalk Explained (Near-End vs Far-End Crosstalk<\/a><\/strong>"}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776780011839","name":"5. Maintain Continuous Reference Planes","itemListElement":[{"@type":"HowToDirection","text":"Avoid:<br\/>. plane splits<br\/>. routing across voids<br\/>These break impedance continuity."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/controlled-impedance-pcb-design-50ohm-100ohm\/#how-to-step-1776780032147","name":"6. Account for Manufacturing Tolerances","itemListElement":[{"@type":"HowToDirection","text":"Real boards vary.<br\/>Typical tolerance:<br\/>. \u00b15% to \u00b110% impedance<br\/>So design margins accordingly."}]}],"inLanguage":"sv-SE"}]}},"_links":{"self":[{"href":"https:\/\/www.han-sphere.com\/sv\/wp-json\/wp\/v2\/posts\/625","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.han-sphere.com\/sv\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.han-sphere.com\/sv\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/sv\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/sv\/wp-json\/wp\/v2\/comments?post=625"}],"version-history":[{"count":2,"href":"https:\/\/www.han-sphere.com\/sv\/wp-json\/wp\/v2\/posts\/625\/revisions"}],"predecessor-version":[{"id":632,"href":"https:\/\/www.han-sphere.com\/sv\/wp-json\/wp\/v2\/posts\/625\/revisions\/632"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/sv\/wp-json\/wp\/v2\/media\/629"}],"wp:attachment":[{"href":"https:\/\/www.han-sphere.com\/sv\/wp-json\/wp\/v2\/media?parent=625"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.han-sphere.com\/sv\/wp-json\/wp\/v2\/categories?post=625"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.han-sphere.com\/sv\/wp-json\/wp\/v2\/tags?post=625"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}