{"id":623,"date":"2026-04-18T08:39:00","date_gmt":"2026-04-18T00:39:00","guid":{"rendered":"https:\/\/www.han-sphere.com\/?p=623"},"modified":"2026-04-21T21:53:47","modified_gmt":"2026-04-21T13:53:47","slug":"pcb-crosstalk-near-end-vs-far-end","status":"publish","type":"post","link":"https:\/\/www.han-sphere.com\/tr\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/","title":{"rendered":"PCB \u00c7apraz Giri\u015fimi A\u00e7\u0131klamas\u0131: Yak\u0131n U\u00e7 \u00c7apraz Giri\u015fimi ve Uzak U\u00e7 \u00c7apraz Giri\u015fimi"},"content":{"rendered":"<p class=\"wp-block-paragraph\">Once signals start switching fast enough, they don\u2019t stay isolated.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Put two traces close together, and energy from one line will couple into the other. That\u2019s crosstalk.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">At low speeds, it\u2019s usually negligible.<br>Y\u00fcksek h\u0131zlarda \u015fu \u015fekilde g\u00f6r\u00fcn\u00fcr:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>sessiz hatlardaki g\u00fcr\u00fclt\u00fc<\/li>\n\n\n\n<li>zamanlama sorunlar\u0131<\/li>\n\n\n\n<li>g\u00f6z diyagram\u0131 kapan\u0131\u015f\u0131<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">If you\u2019ve already looked at return paths and impedance, crosstalk is the next piece of the puzzle.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"428\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/flex-pcb-design-12.jpg\" alt=\"esnek PCB tasar\u0131m\u0131\" class=\"wp-image-259\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/flex-pcb-design-12.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/01\/flex-pcb-design-12-300x214.jpg 300w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">\u00c7apraz konu\u015fma nedir?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\u00c7apraz sinyal, biti\u015fik sinyal izleri aras\u0131nda meydana gelen istenmeyen etkile\u015fimdir.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Bunun nedeni \u015fudur:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>elektrik alan\u0131 kuplaj\u0131 (kapasitif)<\/li>\n\n\n\n<li>manyetik alan kuplaj\u0131 (end\u00fcktif)<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">\u0130ki iz ne kadar yak\u0131n ve uzun bir s\u00fcre boyunca bir arada ilerlerse, kuplaj o kadar g\u00fc\u00e7l\u00fc olur.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Yak\u0131n U\u00e7 ile Uzak U\u00e7 Aras\u0131ndaki \u00c7apraz Giri\u015fim<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\u00c7apraz sinyal genellikle iki t\u00fcre ayr\u0131l\u0131r.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Yak\u0131n U\u00e7 \u00c7apraz Giri\u015fimi (NEXT)<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\u015eu noktada \u00f6l\u00e7\u00fcld\u00fc: <strong>ayn\u0131 sonu\u00e7<\/strong> sinyal kayna\u011f\u0131 olarak.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>hemen g\u00f6r\u00fcn\u00fcr<\/li>\n\n\n\n<li>genellikle daha g\u00fc\u00e7l\u00fc<\/li>\n\n\n\n<li>paralel y\u00f6nlendirmede yayg\u0131n olarak g\u00f6r\u00fcl\u00fcr<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Uzak U\u00e7 Kar\u0131\u015f\u0131m\u0131 (FEXT)<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\u015eu noktada \u00f6l\u00e7\u00fcld\u00fc: <strong>uzak u\u00e7<\/strong> ma\u011fdurun izinden.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>sinyalin yay\u0131l\u0131m\u0131na ba\u011fl\u0131d\u0131r<\/li>\n\n\n\n<li>iz uzunlu\u011fu ve zamanlamadan etkilenir<\/li>\n\n\n\n<li>geometriye ba\u011fl\u0131 olarak k\u0131smen birbirini ortadan kald\u0131rabilir<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">H\u0131zl\u0131 Kar\u015f\u0131la\u015ft\u0131rma<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>T\u00fcr<\/th><th>\u00d6l\u00e7\u00fcm Yeri<\/th><th>Davran\u0131\u015f<\/th><th>Tipik Etki<\/th><\/tr><\/thead><tbody><tr><td>SONRAK\u0130<\/td><td>kayna\u011f\u0131n yak\u0131n\u0131nda<\/td><td>acil<\/td><td>daha \u015fiddetli g\u00fcr\u00fclt\u00fc<\/td><\/tr><tr><td>FEXT<\/td><td>uzak u\u00e7<\/td><td>gecikmeli<\/td><td>uzunlu\u011fa ba\u011fl\u0131d\u0131r<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">\u00c7o\u011fu dijital sistemde, NEXT en \u00f6nemli husustur.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"516\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-4.jpg\" alt=\"FR4 PCB\" class=\"wp-image-505\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-4.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-4-300x258.jpg 300w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2026\/03\/FR4-PCB-4-14x12.jpg 14w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">PCB\u2019lerde \u00c7apraz Giri\u015fimin Nedenleri Nelerdir?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Ger\u00e7ek d\u00fczenlerde birka\u00e7 fakt\u00f6r \u00f6ne \u00e7\u0131kmaktad\u0131r:<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">1. \u0130z Aral\u0131\u011f\u0131<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Closer traces \u2192 stronger coupling<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Bu genellikle en \u00f6nemli fakt\u00f6rd\u00fcr.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">2. Paralel Y\u00f6nlendirme Uzunlu\u011fu<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\u0130ki iz ne kadar uzun s\u00fcre yan yana ilerlerse, o kadar fazla enerji birle\u015fir.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">K\u0131sa paralel b\u00f6l\u00fcmler genellikle sorun yaratmaz. Uzun olanlar ise sorun yarat\u0131r.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">3. Katman D\u00fczeni ve Referans D\u00fczlemleri<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">K\u00f6t\u00fc d\u00f6n\u00fc\u015f yollar\u0131, alan yay\u0131l\u0131m\u0131n\u0131 art\u0131r\u0131r; bu da kuplaj\u0131 art\u0131r\u0131r.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Sa\u011flam bir referans d\u00fczlemi, alanlar\u0131n s\u0131n\u0131rland\u0131r\u0131lmas\u0131na ve \u00e7apraz parazitin azalt\u0131lmas\u0131na yard\u0131mc\u0131 olur.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Bu konuyla ilgili daha fazla bilgi: <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-return-path-ground-plane-high-speed-design\/\">Y\u00fcksek H\u0131zl\u0131 Tasar\u0131mda PCB Geri D\u00f6n\u00fc\u015f Yolu ve Toprak D\u00fczlemi<\/a><\/strong><\/p>\n\n\n\n<h3 class=\"wp-block-heading\">4. Sinyal Y\u00fckselme S\u00fcresi<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Faster edges \u2192 higher frequency content \u2192 more coupling<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Saat frekans\u0131n\u0131z orta d\u00fczeyde olsa bile, h\u0131zl\u0131 kenarlar yine de sorunlara yol a\u00e7abilir.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">\u00c7apraz sinyalin empedans ve geri d\u00f6n\u00fc\u015f yolu ile ili\u015fkisi<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\u00c7apraz sinyal, tek ba\u015f\u0131na ele al\u0131nabilecek bir sorun de\u011fildir.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It\u2019s closely tied to:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>empedans kontrol\u00fc<\/li>\n\n\n\n<li>geri d\u00f6n\u00fc\u015f yolunun b\u00fct\u00fcnl\u00fc\u011f\u00fc<\/li>\n\n\n\n<li>dielektrik \u00f6zellikleri<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">\u00d6rne\u011fin:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>poor return path \u2192 wider field distribution \u2192 more coupling<\/li>\n\n\n\n<li>unstable impedance \u2192 reflections \u2192 additional noise<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">\u0130lgili makaleler:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-dielectric-constant-er-vs-frequency\/\">FR4 Dielektrik Sabiti (Er) ile Frekans Aras\u0131ndaki \u0130li\u015fkinin A\u00e7\u0131klamas\u0131<\/a><\/strong><\/li>\n\n\n\n<li><strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-insertion-loss-dielectric-vs-conductor-loss\/\">PCB Yerle\u015ftirme Kayb\u0131n\u0131n A\u00e7\u0131klamas\u0131 (Dielektrik Kayb\u0131 ve \u0130letken Kayb\u0131)<\/a><\/strong><\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">PCB Tasar\u0131m\u0131nda \u00c7apraz Giri\u015fimi Nas\u0131l Azalt\u0131l\u0131r?<\/h2>\n\n\n\n<div class=\"schema-how-to wp-block-yoast-how-to-block\"><p class=\"schema-how-to-description\">Bu, esas olarak mizanpaj disiplinidir.<\/p> <ol class=\"schema-how-to-steps\"><li class=\"schema-how-to-step\" id=\"how-to-step-1776779131430\"><strong class=\"schema-how-to-step-name\">1. \u0130z Aral\u0131\u011f\u0131n\u0131 Art\u0131r\u0131n<\/strong> <p class=\"schema-how-to-step-text\">En basit kural:<br\/>spacing \u2265 3\u00d7 trace width (3W rule)<br\/>Daha fazla aral\u0131k = daha az etkile\u015fim.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1776779209988\"><strong class=\"schema-how-to-step-name\">2. Paralel Yolu Uzunlu\u011funu Azaltma<\/strong> <p class=\"schema-how-to-step-text\">Y\u00fcksek h\u0131zl\u0131 sinyalleri uzun mesafeler boyunca yan yana iletmekten ka\u00e7\u0131n\u0131n.<br\/>E\u011fer ge\u00e7mek zorunda kal\u0131rlarsa:<br\/>cross at 90\u00b0 when possible<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1776779220032\"><strong class=\"schema-how-to-step-name\">3. Sabit Referans D\u00fczlemleri Kullan\u0131n<\/strong> <p class=\"schema-how-to-step-text\">S\u00fcrekli bir toprak d\u00fczlemi, alanlar\u0131n s\u0131n\u0131rl\u0131 kalmas\u0131n\u0131 sa\u011flar ve kuplaj\u0131 azalt\u0131r.<br\/>Ayr\u0131nt\u0131lar: <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-pcb-stackup-design-guide\/\">FR4 PCB Katman D\u00fczeni Tasar\u0131m K\u0131lavuzu<\/a><\/strong><\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1776779229068\"><strong class=\"schema-how-to-step-name\">4. Kritik Sinyalleri \u0130\u00e7 Katmanlarda Y\u00f6nlendirin<\/strong> <p class=\"schema-how-to-step-text\">\u015eerit hat yap\u0131lar\u0131 (d\u00fczlemler aras\u0131nda), y\u00fczey izlerine k\u0131yasla daha az yay\u0131l\u0131m g\u00f6sterir.<br\/>Bu, hem EMI\u2019yi hem de \u00e7apraz paraziti azalt\u0131r.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1776779240269\"><strong class=\"schema-how-to-step-name\">5. Ground Guard Traces kullan\u0131n (gerekti\u011finde)<\/strong> <p class=\"schema-how-to-step-text\">Sinyaller aras\u0131ndaki toprak izleri yard\u0131mc\u0131 olabilir, ancak yaln\u0131zca \u015fu durumlarda:<br\/>.viyalarla d\u00fczg\u00fcn bir \u015fekilde birle\u015ftirilmi\u015f<br\/>.kat\u0131 bir referans d\u00fczlemine ba\u011fl\u0131<br\/>Aksi takdirde, durumu daha da k\u00f6t\u00fcle\u015ftirebilirler.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1776779259324\"><strong class=\"schema-how-to-step-name\">6. Kenar H\u0131zlar\u0131n\u0131 Kontrol Etme<\/strong> <p class=\"schema-how-to-step-text\">M\u00fcmk\u00fcnse, gereksiz yere h\u0131zl\u0131 y\u00fckselme s\u00fcrelerinden ka\u00e7\u0131n\u0131n.<br\/>Slower edges \u2192 less high-frequency content \u2192 less coupling.<\/p> <\/li><\/ol><\/div>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"600\" height=\"429\" src=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2025\/12\/AI-PCB-3.jpg\" alt=\"AI PCB\" class=\"wp-image-177\" srcset=\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2025\/12\/AI-PCB-3.jpg 600w, https:\/\/www.han-sphere.com\/wp-content\/uploads\/2025\/12\/AI-PCB-3-300x215.jpg 300w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">Diferansiyel \u00c7iftlerde Kar\u0131\u015f\u0131k Sinyal<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Diferansiyel \u00e7iftler farkl\u0131 \u015fekilde davran\u0131r:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>sinyaller birbirleriyle s\u0131k\u0131 bir \u015fekilde ba\u011flant\u0131l\u0131d\u0131r<\/li>\n\n\n\n<li>d\u0131\u015f ba\u011flant\u0131 azal\u0131r<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Ancak:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>\u00c7iftler aras\u0131ndaki yetersiz aral\u0131k h\u00e2l\u00e2 parazite neden oluyor<\/li>\n\n\n\n<li>Dengesizlik, g\u00fcr\u00fclt\u00fcy\u00fc ortak mod sinyallerine d\u00f6n\u00fc\u015ft\u00fcrebilir<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Yani \u00e7iftler aras\u0131nda bo\u015fluk kurallar\u0131 h\u00e2l\u00e2 ge\u00e7erlidir.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Pratik Tasar\u0131m Notlar\u0131<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Ger\u00e7ek tahtalarda s\u0131k\u00e7a g\u00f6r\u00fclen \u015feyler:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Bo\u015fluk ayarlamas\u0131, insanlar\u0131n bekledi\u011finden daha fazla sorunu \u00e7\u00f6z\u00fcyor<\/li>\n\n\n\n<li>Genellikle as\u0131l sorun, uzun paralel y\u00f6nlendirmedir<\/li>\n\n\n\n<li>Bir izi ba\u015fka bir katmana ta\u015f\u0131mak sorunu \u00e7\u00f6zebilir<\/li>\n\n\n\n<li>\u00c7apraz sinyal genellikle veri h\u0131z\u0131 art\u0131r\u0131ld\u0131ktan sonra ortaya \u00e7\u0131kar<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Sonu\u00e7<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\u00c7apraz sinyal, izler aras\u0131ndaki elektromanyetik etkile\u015fimin do\u011fal bir sonucudur.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Y\u00fcksek h\u0131zl\u0131 PCB tasar\u0131m\u0131nda bu, sinyal b\u00fct\u00fcnl\u00fc\u011f\u00fcn\u00fc ve sistem g\u00fcvenilirli\u011fini etkileyen pratik bir sorun haline gelir. Aral\u0131klar\u0131, yolland\u0131rmay\u0131 ve katman dizilimini y\u00f6netmek, bunu kontrol etmenin en etkili yoludur.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Like most SI problems, it\u2019s easier to prevent than to fix later.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">FAQ<\/h2>\n\n\n\n<div class=\"schema-faq wp-block-yoast-faq-block\"><div class=\"schema-faq-section\" id=\"faq-question-1776779516079\"><strong class=\"schema-faq-question\">S: PCB tasar\u0131m\u0131nda \u00e7apraz sinyal nedir?<\/strong> <p class=\"schema-faq-answer\">C: Bu, biti\u015fik izler aras\u0131nda meydana gelen istenmeyen sinyal kuplaj\u0131d\u0131r.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1776779529525\"><strong class=\"schema-faq-question\">S: NEXT ile FEXT aras\u0131ndaki fark nedir?<\/strong> <p class=\"schema-faq-answer\">C: NEXT, kaynak taraf\u0131nda g\u00f6r\u00fcn\u00fcrken, FEXT ise hedef izlemenin uzak ucunda g\u00f6r\u00fcn\u00fcr.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1776779548253\"><strong class=\"schema-faq-question\">S: \u00c7apraz paraziti nas\u0131l azalt\u0131rs\u0131n\u0131z?<\/strong> <p class=\"schema-faq-answer\">C: Aral\u0131\u011f\u0131 art\u0131r\u0131n, paralel yolland\u0131rmay\u0131 azalt\u0131n ve kesintisiz referans d\u00fczlemleri kullan\u0131n.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1776779563371\"><strong class=\"schema-faq-question\">S: \u00c7apraz sinyal her zaman bir sorun mudur?<\/strong> <p class=\"schema-faq-answer\">C: D\u00fc\u015f\u00fck h\u0131zlarda de\u011fil, ancak y\u00fcksek h\u0131zl\u0131 tasar\u0131mlarda \u00f6nemli hale gelir.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1776779585336\"><strong class=\"schema-faq-question\">S: Diferansiyel \u00e7iftler \u00e7apraz parazitten etkilenmez mi?<\/strong> <p class=\"schema-faq-answer\">C: Hay\u0131r, ancak tek u\u00e7lu sinyallere k\u0131yasla daha dayan\u0131kl\u0131d\u0131rlar.<\/p> <\/div> <\/div>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>","protected":false},"excerpt":{"rendered":"<p>\u00c7apraz parazit, y\u00fcksek h\u0131zl\u0131 PCB tasar\u0131m\u0131nda s\u0131k\u00e7a kar\u015f\u0131la\u015f\u0131lan bir sorundur ve kom\u015fu izler \u00fczerindeki sinyallerin birbirini etkilemesine neden olur. Genellikle yak\u0131n u\u00e7 \u00e7apraz parazit (NEXT) ve uzak u\u00e7 \u00e7apraz parazit (FEXT) olarak s\u0131n\u0131fland\u0131r\u0131l\u0131r. Bu makale, \u00e7apraz parazitin nas\u0131l olu\u015ftu\u011funu ve m\u00fchendislerin yerle\u015fim ve katman dizilimi tasar\u0131m\u0131 yoluyla bunu nas\u0131l azaltt\u0131klar\u0131n\u0131 a\u00e7\u0131klamaktad\u0131r.<\/p>","protected":false},"author":1,"featured_media":113,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":""},"categories":[4],"tags":[52],"class_list":["post-623","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news","tag-pcb-crosstalk"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v26.5 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>PCB Crosstalk Explained: Near-End vs Far-End Crosstalk<\/title>\n<meta name=\"description\" content=\"Understand PCB crosstalk, including near-end and far-end crosstalk, causes, and practical ways to reduce signal interference in high-speed designs.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.han-sphere.com\/tr\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/\" \/>\n<meta property=\"og:locale\" content=\"tr_TR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"PCB Crosstalk Explained: Near-End vs Far-End Crosstalk\" \/>\n<meta property=\"og:description\" content=\"Understand PCB crosstalk, including near-end and far-end crosstalk, causes, and practical ways to reduce signal interference in high-speed designs.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.han-sphere.com\/tr\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/\" \/>\n<meta property=\"og:site_name\" content=\"hansphere\" \/>\n<meta property=\"article:published_time\" content=\"2026-04-18T00:39:00+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-04-21T13:53:47+00:00\" \/>\n<meta property=\"og:image\" content=\"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2025\/12\/High-Frequency-PCB.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"533\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"hansphere01\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Yazan:\" \/>\n\t<meta name=\"twitter:data1\" content=\"hansphere01\" \/>\n\t<meta name=\"twitter:label2\" content=\"Tahmini okuma s\u00fcresi\" \/>\n\t<meta name=\"twitter:data2\" content=\"5 dakika\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"WebPage\",\"FAQPage\"],\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/\",\"name\":\"PCB Crosstalk Explained: Near-End vs Far-End Crosstalk\",\"isPartOf\":{\"@id\":\"https:\/\/www.han-sphere.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2025\/12\/High-Frequency-PCB.jpg\",\"datePublished\":\"2026-04-18T00:39:00+00:00\",\"dateModified\":\"2026-04-21T13:53:47+00:00\",\"author\":{\"@id\":\"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422\"},\"description\":\"Understand PCB crosstalk, including near-end and far-end crosstalk, causes, and practical ways to reduce signal interference in high-speed designs.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#breadcrumb\"},\"mainEntity\":[{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779516079\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779529525\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779548253\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779563371\"},{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779585336\"}],\"inLanguage\":\"tr\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"tr\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#primaryimage\",\"url\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2025\/12\/High-Frequency-PCB.jpg\",\"contentUrl\":\"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2025\/12\/High-Frequency-PCB.jpg\",\"width\":800,\"height\":533,\"caption\":\"High Frequency PCB\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.han-sphere.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"PCB Crosstalk Explained: Near-End vs Far-End Crosstalk\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.han-sphere.com\/#website\",\"url\":\"https:\/\/www.han-sphere.com\/\",\"name\":\"hansphere\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.han-sphere.com\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"tr\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422\",\"name\":\"hansphere01\",\"sameAs\":[\"http:\/\/www.han-sphere.com\/\"],\"url\":\"https:\/\/www.han-sphere.com\/tr\/author\/hansphere01\/\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779516079\",\"position\":1,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779516079\",\"name\":\"Q: What is crosstalk in PCB design?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A: It is unwanted signal coupling between adjacent traces.\",\"inLanguage\":\"tr\"},\"inLanguage\":\"tr\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779529525\",\"position\":2,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779529525\",\"name\":\"Q: What is the difference between NEXT and FEXT?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A: NEXT appears at the source end, while FEXT appears at the far end of the victim trace.\",\"inLanguage\":\"tr\"},\"inLanguage\":\"tr\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779548253\",\"position\":3,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779548253\",\"name\":\"Q: How do you reduce crosstalk?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A: Increase spacing, reduce parallel routing, and use solid reference planes.\",\"inLanguage\":\"tr\"},\"inLanguage\":\"tr\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779563371\",\"position\":4,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779563371\",\"name\":\"Q: Is crosstalk always a problem?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A: Not at low speeds, but it becomes significant in high-speed designs.\",\"inLanguage\":\"tr\"},\"inLanguage\":\"tr\"},{\"@type\":\"Question\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779585336\",\"position\":5,\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779585336\",\"name\":\"Q: Are differential pairs immune to crosstalk?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A: No, but they are more resistant compared to single-ended signals.\",\"inLanguage\":\"tr\"},\"inLanguage\":\"tr\"},{\"@type\":\"HowTo\",\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#howto-1\",\"name\":\"PCB Crosstalk Explained: Near-End vs Far-End Crosstalk\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/\"},\"description\":\"This is mostly layout discipline.\",\"step\":[{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#how-to-step-1776779131430\",\"name\":\"1. Increase Trace Spacing\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"The simplest rule:<br\/>spacing \u2265 3\u00d7 trace width (3W rule)<br\/>More spacing = less coupling.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#how-to-step-1776779209988\",\"name\":\"2. Reduce Parallel Routing Length\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Avoid running high-speed signals side by side for long distances.<br\/>If they must cross:<br\/>cross at 90\u00b0 when possible\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#how-to-step-1776779220032\",\"name\":\"3. Use Solid Reference Planes\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"A continuous ground plane keeps fields contained and reduces coupling.<br\/>Details: <strong><a href=\\\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-pcb-stackup-design-guide\/\\\">FR4 PCB Stackup Design Guide<\/a><\/strong>\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#how-to-step-1776779229068\",\"name\":\"4. Route Critical Signals on Inner Layers\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Stripline structures (between planes) radiate less than surface traces.<br\/>This reduces both EMI and crosstalk.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#how-to-step-1776779240269\",\"name\":\"5. Use Ground Guard Traces (When Necessary)\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"Ground traces between signals can help, but only if:<br\/>.properly stitched with vias<br\/>.connected to a solid reference plane<br\/>Otherwise, they can make things worse.\"}]},{\"@type\":\"HowToStep\",\"url\":\"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#how-to-step-1776779259324\",\"name\":\"6. Control Edge Rates\",\"itemListElement\":[{\"@type\":\"HowToDirection\",\"text\":\"If possible, avoid unnecessarily fast rise times.<br\/>Slower edges \u2192 less high-frequency content \u2192 less coupling.\"}]}],\"inLanguage\":\"tr\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"PCB \u00c7apraz Giri\u015fimi A\u00e7\u0131klamas\u0131: Yak\u0131n U\u00e7 \u00c7apraz Giri\u015fimi ve Uzak U\u00e7 \u00c7apraz Giri\u015fimi","description":"Yak\u0131n u\u00e7 ve uzak u\u00e7 \u00e7apraz parazitleri dahil olmak \u00fczere PCB \u00e7apraz parazitini, nedenlerini ve y\u00fcksek h\u0131zl\u0131 tasar\u0131mlarda sinyal parazitini azaltman\u0131n pratik yollar\u0131n\u0131 anlay\u0131n.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.han-sphere.com\/tr\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/","og_locale":"tr_TR","og_type":"article","og_title":"PCB Crosstalk Explained: Near-End vs Far-End Crosstalk","og_description":"Understand PCB crosstalk, including near-end and far-end crosstalk, causes, and practical ways to reduce signal interference in high-speed designs.","og_url":"https:\/\/www.han-sphere.com\/tr\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/","og_site_name":"hansphere","article_published_time":"2026-04-18T00:39:00+00:00","article_modified_time":"2026-04-21T13:53:47+00:00","og_image":[{"width":800,"height":533,"url":"http:\/\/www.han-sphere.com\/wp-content\/uploads\/2025\/12\/High-Frequency-PCB.jpg","type":"image\/jpeg"}],"author":"hansphere01","twitter_card":"summary_large_image","twitter_misc":{"Yazan:":"hansphere01","Tahmini okuma s\u00fcresi":"5 dakika"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["WebPage","FAQPage"],"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/","url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/","name":"PCB \u00c7apraz Giri\u015fimi A\u00e7\u0131klamas\u0131: Yak\u0131n U\u00e7 \u00c7apraz Giri\u015fimi ve Uzak U\u00e7 \u00c7apraz Giri\u015fimi","isPartOf":{"@id":"https:\/\/www.han-sphere.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#primaryimage"},"image":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#primaryimage"},"thumbnailUrl":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2025\/12\/High-Frequency-PCB.jpg","datePublished":"2026-04-18T00:39:00+00:00","dateModified":"2026-04-21T13:53:47+00:00","author":{"@id":"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422"},"description":"Yak\u0131n u\u00e7 ve uzak u\u00e7 \u00e7apraz parazitleri dahil olmak \u00fczere PCB \u00e7apraz parazitini, nedenlerini ve y\u00fcksek h\u0131zl\u0131 tasar\u0131mlarda sinyal parazitini azaltman\u0131n pratik yollar\u0131n\u0131 anlay\u0131n.","breadcrumb":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#breadcrumb"},"mainEntity":[{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779516079"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779529525"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779548253"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779563371"},{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779585336"}],"inLanguage":"tr","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/"]}]},{"@type":"ImageObject","inLanguage":"tr","@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#primaryimage","url":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2025\/12\/High-Frequency-PCB.jpg","contentUrl":"https:\/\/www.han-sphere.com\/wp-content\/uploads\/2025\/12\/High-Frequency-PCB.jpg","width":800,"height":533,"caption":"High Frequency PCB"},{"@type":"BreadcrumbList","@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.han-sphere.com\/"},{"@type":"ListItem","position":2,"name":"PCB Crosstalk Explained: Near-End vs Far-End Crosstalk"}]},{"@type":"WebSite","@id":"https:\/\/www.han-sphere.com\/#website","url":"https:\/\/www.han-sphere.com\/","name":"hansphere","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.han-sphere.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"tr"},{"@type":"Person","@id":"https:\/\/www.han-sphere.com\/#\/schema\/person\/a8f2356806898d33a9f431801140e422","name":"hansphere01","sameAs":["http:\/\/www.han-sphere.com\/"],"url":"https:\/\/www.han-sphere.com\/tr\/author\/hansphere01\/"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779516079","position":1,"url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779516079","name":"S: PCB tasar\u0131m\u0131nda \u00e7apraz sinyal nedir?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"A: It is unwanted signal coupling between adjacent traces.","inLanguage":"tr"},"inLanguage":"tr"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779529525","position":2,"url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779529525","name":"S: NEXT ile FEXT aras\u0131ndaki fark nedir?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"A: NEXT appears at the source end, while FEXT appears at the far end of the victim trace.","inLanguage":"tr"},"inLanguage":"tr"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779548253","position":3,"url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779548253","name":"S: \u00c7apraz paraziti nas\u0131l azalt\u0131rs\u0131n\u0131z?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"A: Increase spacing, reduce parallel routing, and use solid reference planes.","inLanguage":"tr"},"inLanguage":"tr"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779563371","position":4,"url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779563371","name":"S: \u00c7apraz sinyal her zaman bir sorun mudur?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"A: Not at low speeds, but it becomes significant in high-speed designs.","inLanguage":"tr"},"inLanguage":"tr"},{"@type":"Question","@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779585336","position":5,"url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#faq-question-1776779585336","name":"S: Diferansiyel \u00e7iftler \u00e7apraz parazitten etkilenmez mi?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"A: No, but they are more resistant compared to single-ended signals.","inLanguage":"tr"},"inLanguage":"tr"},{"@type":"HowTo","@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#howto-1","name":"PCB \u00c7apraz Giri\u015fimi A\u00e7\u0131klamas\u0131: Yak\u0131n U\u00e7 \u00c7apraz Giri\u015fimi ve Uzak U\u00e7 \u00c7apraz Giri\u015fimi","mainEntityOfPage":{"@id":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/"},"description":"Bu, esas olarak mizanpaj disiplinidir.","step":[{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#how-to-step-1776779131430","name":"1. Increase Trace Spacing","itemListElement":[{"@type":"HowToDirection","text":"The simplest rule:<br\/>spacing \u2265 3\u00d7 trace width (3W rule)<br\/>More spacing = less coupling."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#how-to-step-1776779209988","name":"2. Reduce Parallel Routing Length","itemListElement":[{"@type":"HowToDirection","text":"Avoid running high-speed signals side by side for long distances.<br\/>If they must cross:<br\/>cross at 90\u00b0 when possible"}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#how-to-step-1776779220032","name":"3. Use Solid Reference Planes","itemListElement":[{"@type":"HowToDirection","text":"A continuous ground plane keeps fields contained and reduces coupling.<br\/>Details: <strong><a href=\"https:\/\/www.han-sphere.com\/blog\/news\/fr4-pcb-stackup-design-guide\/\">FR4 PCB Stackup Design Guide<\/a><\/strong>"}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#how-to-step-1776779229068","name":"4. Route Critical Signals on Inner Layers","itemListElement":[{"@type":"HowToDirection","text":"Stripline structures (between planes) radiate less than surface traces.<br\/>This reduces both EMI and crosstalk."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#how-to-step-1776779240269","name":"5. Use Ground Guard Traces (When Necessary)","itemListElement":[{"@type":"HowToDirection","text":"Ground traces between signals can help, but only if:<br\/>.properly stitched with vias<br\/>.connected to a solid reference plane<br\/>Otherwise, they can make things worse."}]},{"@type":"HowToStep","url":"https:\/\/www.han-sphere.com\/blog\/news\/pcb-crosstalk-near-end-vs-far-end\/#how-to-step-1776779259324","name":"6. Control Edge Rates","itemListElement":[{"@type":"HowToDirection","text":"If possible, avoid unnecessarily fast rise times.<br\/>Slower edges \u2192 less high-frequency content \u2192 less coupling."}]}],"inLanguage":"tr"}]}},"_links":{"self":[{"href":"https:\/\/www.han-sphere.com\/tr\/wp-json\/wp\/v2\/posts\/623","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.han-sphere.com\/tr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.han-sphere.com\/tr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/tr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/tr\/wp-json\/wp\/v2\/comments?post=623"}],"version-history":[{"count":1,"href":"https:\/\/www.han-sphere.com\/tr\/wp-json\/wp\/v2\/posts\/623\/revisions"}],"predecessor-version":[{"id":624,"href":"https:\/\/www.han-sphere.com\/tr\/wp-json\/wp\/v2\/posts\/623\/revisions\/624"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.han-sphere.com\/tr\/wp-json\/wp\/v2\/media\/113"}],"wp:attachment":[{"href":"https:\/\/www.han-sphere.com\/tr\/wp-json\/wp\/v2\/media?parent=623"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.han-sphere.com\/tr\/wp-json\/wp\/v2\/categories?post=623"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.han-sphere.com\/tr\/wp-json\/wp\/v2\/tags?post=623"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}