Fabrication, full BOM component sourcing, SMT/THT assembly, testing, coating and fulfillment — managed end-to-end by a single point of contact, with full material-to-shipment traceability.
Full-service assembly programs built around each industry's compliance and volume needs. Hover to explore.
IATF 16949 turnkey builds with full material traceability, covering BMS, ADAS and body electronics from a single supplier.
ISO 13485 turnkey assembly with authenticated components and lot-level traceability for regulated device manufacturers.
Long-life component sourcing and obsolescence management for equipment with 10+ year field service requirements.
High-mix, cost-optimized sourcing and assembly at volume, with flexible scheduling for seasonal demand spikes.
Component sourcing continuity for infrastructure builds where a single missing part can stall a network rollout.
AS6081-screened components and full chain-of-custody documentation for mission-critical, audit-ready programs.
Turnkey scale-up from pilot run to mass production without changing suppliers, protecting margin as volumes grow.
Heavy-copper assembly and conformal coating for power conversion and renewable-energy modules deployed outdoors.
No juggling separate PCB, component and assembly vendors. One quote, one lead time, one point of contact for the entire build.
Upload Gerbers and BOM for a unified quote covering fabrication, sourcing and assembly. Our engineers run a free DFM/DFA review, flagging stack-up, footprint and sourcing risks before anything is ordered.
Single quote · free DFM/DFA · 8h turnaroundBoards are built in-house while our procurement team sources the full BOM in parallel through authorized distributors, with obsolescence and lead-time risk flagged and buffered early.
In-house fab · authorized distributors · parallel sourcingComponents are authenticated and kitted, then placed via SMT and hand-soldered THT lines. Every board passes AOI, X-ray and electrical test before moving to finishing.
AS6081 screening · SMT + THT · 100% testConformal coating or potting applied where specified, followed by custom packaging and direct fulfillment — drop-ship to your customers or consolidated delivery to your dock.
Conformal coating · custom kitting · drop-ship / VMIFabrication, sourcing and assembly are managed on our floor — no hand-offs between separate vendors.
Full BOM procurement through a network of 3,000+ authorized distributors and franchised suppliers. Every part is cross-checked against manufacturer records, with obsolescence and end-of-life alternatives flagged before your build is scheduled.
SMT lines for fine-pitch BGA and QFN placement, hand and selective-solder THT stations, and BGA/QFN rework capability — all under one roof so your board never leaves the building between processes.
Incoming components are screened per AS6081 methodology — visual, XRF and electrical verification against manufacturer data. Every lot is logged so your finished product can be traced back to its raw material source.
Acrylic, silicone, urethane or epoxy potting applied for boards facing moisture, dust or vibration exposure, followed by custom kitting and direct fulfillment — drop-ship to end customers or consolidated shipment to your warehouse.
From single-prototype builds to 100,000-unit production runs — the same supplier network, traceability and process control apply at every volume tier.
| Parameter | Turnkey Capability | Status |
|---|---|---|
| Supplier Network Coverage | 3,000+ authorized distributors — Asia, N. America, Europe | Available |
| Component Sourcing Lead Time | 3 – 15 business days by part class | Available |
| Obsolescence / EOL Management | Cross-reference & form-fit-function substitution | Available |
| Inventory Buffer / Consignment | 4 / 8 / 12-week safety-stock programs | Available |
| Order Volume Range | 1 – 100,000+ units per build | Available |
| Assembly Technology | SMT, THT, mixed-technology, BGA/QFN rework | Available |
| Conformal Coating / Potting | Acrylic, silicone, urethane, epoxy potting | Available |
| Component Authentication | AS6081 screening, XRF, decap analysis | Available |
| Traceability | Raw material to finished-good, lot & serial level | Available |
| Packaging & Fulfillment | Custom kitting, drop-ship, VMI programs | Available |
Turnkey procurement demands total transparency across fabrication, sourcing and assembly. Our QMS covers every stage from incoming component inspection to final electrical test, with documentation ready for your audit team.
Real full-service builds — from BOM sourcing through fulfillment.
Full BOM sourced during a global chip shortage for a smart-metering OEM, with kitting, SMT assembly, potting and drop-ship to regional distributors.
Every line item sourced or substituted with an approved alternative — zero production stoppage despite a market-wide shortage. Program now runs on a rolling 12-week inventory buffer.
Regulated power-supply build for a diagnostics device manufacturer, requiring authenticated components and conformal coating for cleanroom deployment.
Passed customer's ISO 13485 supplier audit on first review. Program has run continuously for three years with full lot traceability on every shipment.
Obsolescence management for a small-cell manufacturer whose original RF components had reached end-of-life, combined with mixed SMT/THT box-build assembly.
Form-fit-function substitutes qualified and re-validated within three weeks, keeping the customer's network rollout on schedule with zero re-design of the board.
Managing separate PCB, component and assembly vendors creates risk at every hand-off. A turnkey partner removes that risk — and gives you one team accountable for the outcome.
Fabrication, sourcing, assembly, test and fulfillment are managed by one program manager — no finger-pointing between vendors when something needs to change.
Every component is procured from authorized channels and screened per AS6081 before it reaches the assembly line, with obsolescence risk flagged early — not discovered at kitting.
Our engineers review your design for manufacturability and assembly risk before parts are ordered — catching footprint, panelization and sourcing issues while they're still cheap to fix.
Optional safety-stock and consignment programs mean lead-time shocks and allocation shortages hit our buffer first — not your production schedule.
Common questions about turnkey PCB assembly, component sourcing and program management.
In a turnkey program, we source and procure the entire BOM ourselves and take full responsibility for the finished assembly. In consignment assembly, you supply some or all components and we handle fabrication and placement only. Turnkey removes the burden of managing multiple component suppliers and gives you a single quote and lead time for the complete build.
Components are procured exclusively through authorized distributors and franchised suppliers in our network of 3,000+ approved sources. Every incoming lot is screened per AS6081 methodology — visual inspection, XRF material verification and electrical testing — before it's released for kitting.
Yes. Our procurement team monitors BOMs for parts approaching end-of-life and proposes form-fit-function substitutes with engineering sign-off before they become a production blocker. For allocation-constrained parts, we can also set up broker-verified sourcing or extended lead-time buffering as part of your program.
Average turnkey lead time is around 10 business days from approved BOM/Gerbers to shipment, covering fabrication, component procurement, kitting, assembly and test. Actual lead time depends on component availability — parts already in our approved-supplier stock ship faster, while allocation-constrained parts extend the timeline. We flag this in your quote up front.
Yes. Every turnkey build carries lot and serial-level traceability from raw material and component receipt through final shipment, including certificates of conformance, material declarations and first-article inspection reports. Documentation packages are prepared to IATF 16949 / ISO 13485 audit standards depending on your industry.
Yes. Beyond board assembly, we offer conformal coating and potting, cable/connector integration, custom retail or bulk packaging, and fulfillment logistics including direct drop-ship to your end customers or vendor-managed inventory (VMI) programs to your warehouse.
Our program engineering team will review your BOM and Gerbers and return a unified DFM report and turnkey quote within 8 working hours.
Fill in the details below and we'll get back to you shortly.