FPC Design Tools

Flex PCB Minimum Bend Radius Calculator

Estimate the minimum bend radius for a flexible circuit from its total thickness, copper layer count, and bend type. Compare a one-time static bend against repeated dynamic flexing to protect copper from cracking and extend flex life.

More PCB Tools All Tools Gold Fingers PI Calculator PCB Impedance Calculator Trace Width Calculator Via Current Calculator Copper Weight Converter
Input parameters
Calculation results
Static Bend
—mm
Bend once or a few times (install)
Dynamic Bend
—mm
Repeated flexing in service
ScenarioMultiplierMin radius (mm)Min radius (mil)

* Results use common flex design rule-of-thumb multipliers of total flex thickness (single-sided: 6× static, 20× dynamic; double-sided/multilayer: 10× static, 40× dynamic). Very high flex-cycle counts can require a larger radius. Confirm the final radius against IPC-2223 and with your flex manufacturer.

Formula
Minimum bend radius:
Rmin = m × t

t = total flex thickness, m = multiplier set by construction and bend type.

Multipliers used:

Single-sided: static 6×, dynamic 20×

Double-sided / multilayer: static 10×, dynamic 40×

Design tips:

Bend perpendicular to traces
Keep vias and pads out of the bend zone
Use rolled-annealed copper for dynamic flex
Stagger traces on double-sided flex

WhatsApp