PCB Design Tools

PCB Via Current & Temperature Rise Calculator

Estimate how much current a plated through-hole via can carry before it overheats, based on via size, plating thickness, and board thickness. Compare a single via against a parallel via array to see how much sharing the current helps.

More PCB Tools All Tools Gold Fingers PI Calculator PCB Impedance Calculator Trace Width Calculator Copper Weight Converter Flex Bend Radius Calculator
Input parameters
A
vias
°C
°C
Calculation results
Single Via
—°C
Temp Rise at Your Current
2 Vias in Parallel
—°C
Temp Rise, Shared Evenly
MetricSingle Via2 Vias
Max Current at Allowed Rise— A— A
Current per Via— A— A
Resistance (per via)— mΩ— mΩ
Voltage Drop— mV— mV
Power Loss (total)— W— W

* Via barrel is modeled as an unrolled copper trace (circumference × plating thickness), using IPC-2221 external-layer constants. This is a practical engineering estimate — verify against your fab's actual plating tolerance, and confirm final via count and placement with your manufacturer for high-current designs.

Formula
Step 1 — Unroll the via into an equivalent trace:
A = π × (D − t) × t
Step 2 — Solve temperature rise (IPC-2221, external):
ΔT = I k × Ac 1/b

IPC-2221 external-layer constants:

k = 0.048,  b = 0.44,  c = 0.725

D = finished hole diameter, t = plating thickness, both in mil. A is the barrel's unrolled cross-sectional area in mil².

Typical plating thickness:

Minimum per IPC-6012: 25 µm (~1 mil)
Heavy copper / high current: 50–75 µm

Resistance per via:
R = ρ × L A

ρ = 1.72×10⁻⁸ Ω·m (copper resistivity)
L = via length (board thickness)
Vias in parallel: resistance divides by N, current divides by N

WhatsApp