Industrial Automation PCB

Giải pháp PCB cho
Tự động hóa công nghiệp

From PLCs and servo drives to industrial IoT and safety controllers — robust, high-current PCBs engineered for 24/7 operation in harsh factory environments.

Loại 2 / 3 theo tiêu chuẩn IPC Tương thích với tiêu chuẩn IP67 -40°C to +125°C EMC Tested
125°C
Nhiệt độ hoạt động tối đa
20oz
Trọng lượng tối đa của đồng
32L
Số lớp tối đa
24/7
Continuous operation rating
20oz
Trọng lượng tối đa của đồng
-40°C
Nhiệt độ hoạt động tối thiểu
8h
Thời gian hoàn thành việc rà soát DFM
IPC 3
Build standard on request
Ứng dụng

Where our PCBs run
in industrial systems

From the factory floor to outdoor substations — we supply boards for the full spectrum of industrial electronics.

01

PLC & Safety Controllers

High-Tg FR4 and polyimide multilayer boards up to 30 layers for PLCs and safety controllers, with conformal-coat ready stackups for IP-rated enclosures.

02

Motor Drives & Servo Amplifiers

Heavy copper boards up to 20 oz with custom thermal via arrays sustaining 400A+ current paths for servo amplifiers and motor drive electronics.

03

HMI & Touch Panel Controllers

HDI multilayer boards for compact touch-panel human-machine interfaces mounted directly on machine enclosures across the factory floor.

04

Industrial Power Conversion

Heavy copper multilayer boards engineered for AC-DC and DC-DC power conversion modules feeding motor drives and control cabinets.

05

IIoT Edge Gateways

8-layer any-layer HDI boards with Ethernet, CAN, RS-485 and Wi-Fi 6 connectivity, rated -40°C to +85°C with IP67 potting-compatible stackups.

06

Robot & Motion Controllers

HDI and rigid-flex boards for compact robot joint controllers and motion-control cards integrated inside factory automation cells.

07

Sensor & Actuator Interfaces

Standard multilayer PCBs for proximity sensor, encoder and pneumatic actuator interface modules operating on the production line.

08

Outdoor Substation Controls

Conformal-coated IPC Class 3 boards built to -40°C to +125°C for outdoor electrical substation monitoring and control panels.

Thử thách Kỹ thuật

Why industrial automation PCBs
require a different standard

Factory automation equipment runs continuously, often in extreme conditions. Board failures cause production downtime that costs thousands per minute.

01

Harsh Environments — 24/7 Operation

Industrial PCBs face continuous temperature cycles, high humidity, vibration, EMI and chemical contamination. Boards in motor drives and outdoor enclosures must maintain full performance across -40°C to +125°C without derating.

-40°C to +125°C · IP67 compatible · conformal coating
02

Quản lý dòng điện cao và nhiệt

Motor drives and power conversion boards carry currents from tens to hundreds of amperes. Standard 1 oz copper traces simply cannot sustain these loads. Heavy copper up to 20 oz and thermal via arrays are essential, not optional.

up to 20 oz copper · 400A+ · thermal via arrays
03

EMC & Functional Safety

Industrial environments generate significant electromagnetic interference. Boards must meet IEC 61000 immunity requirements, while safety-critical control circuits must comply with IEC 62061 (SIL) functional safety standards — with full documentation.

IEC 61000 EMC · SIL 2/3 · IEC 62061
Công nghệ bảng mạch

Các công nghệ PCB được phát triển
for the factory floor

Industrial applications demand boards that last. We match the right technology to your operating environment.

Motor Drives · Power Conversion

Bảng mạch in đồng dày

Up to 20 oz finished copper for high-current motor drives, servo amplifiers and power distribution boards. Custom thermal via patterns and bus-bar integration capability to manage heat at the source.

tối đa 20 oz Cu 400A+ paths mảng lỗ dẫn nhiệt
Get a Quote →
PLC · Safety Controllers

Đa lớp có độ tin cậy cao

High-Tg FR4 and polyimide multilayer boards for PLCs, safety controllers and industrial computers operating in harsh environments. Conformal coating pre-approved stackups available for IP-rated enclosures.

Tg 170–220°C tối đa 30 lớp sẵn sàng để phủ lớp sơn phù hợp
Get a Quote →
IIoT · Robotics · HMI

HDI & Rigid-Flex PCB

High-density interconnect and rigid-flex boards for compact IIoT gateways, robot joint controllers and touch-panel HMIs. Miniaturise without compromising the reliability demanded by 24/7 factory operation.

HDI nhiều lớp cứng-mềm 2,5/2,5 mil
Get a Quote →
Thông số kỹ thuật

Được thiết kế dành riêng cho ngành ô tô
thông số kỹ thuật.

Mỗi thông số dưới đây đều được kiểm tra để đảm bảo tuân thủ các yêu cầu của tiêu chuẩn IATF 16949 và IPC-A-600 Loại 3. Báo cáo thử nghiệm đầy đủ và thông tin truy xuất nguồn gốc vật liệu được gửi kèm theo mỗi đơn hàng.

  • 20oz
    Trọng lượng tối đa của đồng
  • -40°C
    Nhiệt độ hoạt động tối thiểu
  • 30L
    Số lớp tối đa
  • ±5%
    Dung sai trở kháng
Request Capability Sheet →
Tham sốTiêu chuẩn dành cho ngành ô tôTình trạng
Số lớp2 – 30 layersCòn hàng
Trọng lượng đồngTối đa 20 oz đồng thành phẩmCòn hàng
Nhiệt độ hoạt động-40°C to +125°CCòn hàng
Khoảng cách tối thiểu / Khoảng trống2,5 / 2,5 milCòn hàng
Bề mặt hoàn thiệnHASL / ENIG / ENEPIG / OSPCòn hàng
Trở kháng được điều khiển±5% tolerance, TDR verifiedCòn hàng
Tiêu chuẩn xây dựng IPCLoại 2: mặc định, Loại 3: theo yêu cầuCòn hàng
Lớp phủ bảo vệPre-approved stackups for IP67 assembliesCòn hàng
Khả năng truy xuất nguồn gốc lô hàngFull lot level documentationCòn hàng
Chất lượng và Tuân thủ

Industrial-grade quality for demanding environments.

Factory automation PCBs must not fail. Our IPC Class 2/3 certified processes, full electrical test and conformal coating expertise ensure your boards keep production running.

ISO 9001:2015
Hệ thống quản lý chất lượng được kiểm toán bởi bên thứ ba
IPC-A-600 Loại 2 / 3
Các tiêu chí chấp nhận theo tiêu chuẩn ngành
RoHS / REACH
Tuân thủ các quy định của EU về chất nguy hại
Được liệt kê trong danh sách UL E-File
Chứng nhận an toàn của Hoa Kỳ và Canada

Phương pháp thử nghiệm và kiểm tra

  • Kiểm tra quang học tự động 100% (AOI)Mỗi lớp, mỗi tấm ván
  • 100% Electrical Test (Flying Probe / Fixture)Open/short on all nets
  • Kiểm tra bằng tia XBGA and buried via integrity
  • Kiểm tra trở kháng bằng TDR±5% verified per production lot
  • Thermal Cycling -40°C to +125°CTheo tiêu chuẩn IEC 60068-2-14
  • Phân tích vi cắt và cắt ngangVia plating and barrel integrity
  • Kiểm tra khả năng chịu dòng điệnOn heavy copper lots per IPC-2152
  • Kiểm tra lớp phủ bảo vệUV-fluorescence verification post-coat
Các trường hợp điển hình

Các dự án chúng tôi đã thực hiện

Real automotive PCB challenges — and how we solved them.

Motion Control · Servo Drive

500A Servo Motor Drive Board

12-layer heavy copper board (10 oz) for a 500A industrial servo amplifier. Required bus-bar integration, custom thermal via array and IEC 60950 clearance on all HV traces.

10oz
Đồng
500A
Rated current
0thất bại
4 yr field
Kết quả

Zero thermal failures across 4 years of 24/7 industrial deployment. Customer reduced heatsink mass by 35% using our thermal via layout recommendation.

Safety PLC · SIL 2

Functional Safety Controller

16-layer IPC Class 3 board for a SIL 2 safety PLC. Required full FAI, IEC 62061 documentation package and lot-level component traceability.

16L
Các lớp
SIL 2
Safety level
FAI ✓
1st submit
Kết quả

FAI approved first submission. Safety documentation package accepted by TÜV assessor without queries. Now in volume production for 3 machine platforms.

IIoT · Edge Gateway

Multi-Protocol IIoT Gateway PCB

8-layer HDI board with simultaneous Ethernet, CAN, RS-485, Wi-Fi 6 and LoRa capability for a factory edge gateway. -40°C to +85°C rating, IP67 potting-compatible stackup.

8L
Các lớp
5giao thức
Giao diện
IP67
Potting-ready
Kết quả

98.6% first-pass yield on 5,000-unit run. Gateway boards have operated in outdoor installations for 2+ years with zero weather-related failures.

Tại sao lại là HanSphere?

Tại sao lại là các nhà cung cấp cấp 1?
Hãy chọn chúng tôi.

Automotive procurement teams need more than a PCB factory — they need a certified partner with documented processes, fast engineering response and the depth to solve problems before the production line.

20oz
Trọng lượng tối đa của đồng

In-house heavy copper — no outsourcing

We press, plate and etch heavy copper boards entirely in-house. No third-party job-shop, no quality handoffs — your current-carrying traces are controlled from bare laminate to finished board.

8h
Thời gian hoàn thành DFM

Engineering review before a single panel is made

Our industrial engineers check your stackup, copper distribution, thermal vias and clearances within 8 hours — catching issues before they become expensive field failures.

24/7
Production capacity

Ready for volume production and quick-turn

48-hour express prototypes for development, reliable 5–10 day standard lead times for production. Our facility runs 24/7 so your project doesn't wait.

DDP
Hơn 40 quốc gia

Global supply chain, one partner

Door-to-door delivery to factory sites worldwide. English-speaking engineers and account managers on call for technical issues at any stage of your production run.

Yêu cầu báo giá

Bắt đầu hành trình với ô tô của bạn
Dự án PCB hôm nay.

Our industrial automation PCB engineering team will review your design and return a full DFM report and quote within 8 working hours.

  • Dịch vụ đánh giá DFM được bao gồm trong mọi yêu cầu tư vấn
  • NDA signed on request — standard practice
  • Có sẵn tài liệu về tiêu chuẩn IATF 16949
  • Trả lời trong vòng 8 giờ làm việc
  • Không cần cam kết để nhận báo giá
Request Industrial PCB Quote All files encrypted · Max 80MB per upload · NDA available

Yêu cầu báo giá

Vui lòng điền thông tin chi tiết vào phần dưới đây và chúng tôi sẽ liên hệ lại với quý vị trong thời gian sớm nhất.

WhatsApp