Automotive Electronics PCB

Giải pháp PCB cho
Điện tử ô tô

From ADAS radar and EV battery management to engine control and body modules — high-reliability boards engineered for the full demands of modern vehicles.

IATF 16949 Certified Loại 2 / 3 theo tiêu chuẩn IPC -40°C to +150°C AEC-Q200 Ready
up to 150°C
Nhiệt độ hoạt động tối đa
IPC 3
Class 3 on request
32L
Số lớp tối đa
15+yr
Automotive lifetime reliability
500+
Automotive projects delivered
0 ppm
Tỷ lệ lỗi mục tiêu
8h
Thời gian hoàn thành việc rà soát DFM
IATF
16949 quality system certified
Ứng dụng

Where our boards run
in your vehicle

Every system in the modern vehicle relies on precision PCBs. Hover to explore.

01

ADAS & Radar Systems

High-frequency RF boards on Rogers laminates for 77 GHz forward collision, lane departure and autonomous driving sensor fusion.

02

EV Battery Management

Heavy copper BMS boards for cell monitoring, thermal management and charge control in hybrid and full-electric vehicles.

03

Engine & Powertrain Control

High-temperature multilayer boards for ECU and TCU operating near the engine bay from -40°C to +150°C.

04

Infotainment & Digital Cockpit

HDI multilayer boards for in-vehicle displays, connectivity, navigation and digital cluster platforms.

05

Chassis & Safety Systems

IPC Class 3 boards for ABS, ESP, airbag control and active suspension — zero tolerance for in-field failure.

06

Body Control Modules

Standard multilayer PCBs for door locks, window controls, lighting automation and central body electronics.

07

Hệ thống chiếu sáng ô tô

Metal-core and aluminium PCBs for matrix LED headlights and adaptive lighting systems.

08

HVAC & Comfort Systems

Robust multilayer PCBs for climate control, seat adjustment and ambient environment management.

Thử thách Kỹ thuật

Why automotive PCBs
demand more from your supplier

Modern vehicles carry 50+ ECUs and over 3 km of wiring. Every board must perform without failure for a 15-year vehicle lifetime.

01

Extreme Operating Environments

Engine bay PCBs survive temperature swings from -40°C to +150°C, continuous vibration up to 30G, fuel and oil exposure — every production day, for 15+ years. Consumer-grade materials simply fail.

-40°C to +150°C · 30G vibration · 15-year life
02

ISO 26262 Functional Safety

ADAS, braking and steering PCBs must meet ASIL-B through ASIL-D requirements. Any latent defect in a safety-critical trace can lead to loss of vehicle control. Zero-defect processes are not optional — they are mandatory.

ASIL-D · ISO 26262 · safety-critical design
03

Full Traceability from Material to Vehicle

IATF 16949 mandates lot-level traceability for every board shipped into a vehicle. Your Tier-1 customers expect complete material declarations, FAI reports and process records — audit-ready, every batch.

IATF 16949 · FAI · lot traceability
Công nghệ bảng mạch

The right PCB technology
for every vehicle system

We manufacture all types in-house — no critical process is outsourced.

ECU / BCM / Powertrain

High-Temperature Multilayer

High-Tg FR4 and polyimide laminates for boards living in the engine bay. Stable electrical performance across the full automotive temperature range, with controlled impedance throughout the stack.

tối đa 30 lớp Tg 170–220°C ±5% impedance
Get a Quote →
ADAS · V2X · 5G

Bảng mạch in tần số cao (RF)

Rogers 4350B, Taconic and low-Dk laminates for 77 GHz automotive radar, vehicle-to-everything communication and 5G telematics modules. ENIG finish as standard for consistent insertion loss.

Rogers 4350B / 3003 lên đến 77 GHz ENIG / ENEPIG
Get a Quote →
EV · BMS · On-Board Charger

Bảng mạch in đồng dày

Up to 20 oz finished copper for EV battery management systems, on-board chargers and DC-DC converters. Heavy copper handles the high current densities that standard PCBs can't sustain reliably.

tối đa 20 oz Cu 400A+ current paths custom thermal vias
Get a Quote →
Thông số kỹ thuật

Được thiết kế dành riêng cho ngành ô tô
thông số kỹ thuật.

Mỗi thông số dưới đây đều được kiểm tra để đảm bảo tuân thủ các yêu cầu của tiêu chuẩn IATF 16949 và IPC-A-600 Loại 3. Báo cáo thử nghiệm đầy đủ và thông tin truy xuất nguồn gốc vật liệu được gửi kèm theo mỗi đơn hàng.

  • 30L
    Số lớp tối đa
  • 20oz
    Trọng lượng tối đa của đồng
  • ±5%
    Dung sai trở kháng
  • 0.10mm
    Đường kính lỗ via laser tối thiểu
Request Capability Sheet →
Tham sốTiêu chuẩn dành cho ngành ô tôTình trạng
Số lớp2 – 30 layersCòn hàng
Khoảng cách tối thiểu / Khoảng trống2,5 / 2,5 milCòn hàng
Nhiệt độ hoạt động-40°C to +150°CCòn hàng
Trọng lượng đồngUp to 20 ozCòn hàng
Bề mặt hoàn thiệnENIG / ENEPIG / OSP / Bạc ngâmCòn hàng
Trở kháng được điều khiển±5% toleranceCòn hàng
Đường kính lỗ thông qua bằng laserTối thiểu 0,10 mmCòn hàng
Tiêu chuẩn xây dựng IPCClass 2 default · Class 3 on requestCòn hàng
Khả năng truy xuất nguồn gốc lô hàngMức độ đầy đủ lô + số sê-riCòn hàng
Chất lượng và Tuân thủ

Các quy trình đã được chứng nhận mà đội ngũ đảm bảo chất lượng của quý vị có thể tiến hành kiểm toán.

Automotive procurement requires complete transparency. Our IATF 16949 QMS covers every stage from incoming materials to final electrical test. Full documentation and FAI reports on every order.

IATF 16949:2016
Hệ thống quản lý chất lượng trong ngành ô tô
ISO 9001:2015
Hệ thống quản lý chất lượng được kiểm toán bởi bên thứ ba
IPC-A-600 Loại 2 / 3
Tiêu chuẩn sản xuất có độ tin cậy cao
Tuân thủ các tiêu chuẩn RoHS / REACH
Có sẵn bản khai đầy đủ về thành phần vật liệu

Phương pháp thử nghiệm và kiểm tra

  • Kiểm tra quang học tự động 100% (AOI)Mỗi lớp, mỗi tấm ván
  • X-Ray Inspection — BGA & Hidden Joints100% coverage on BGA components
  • 100% Electrical Test (Flying Probe / Fixture)Open / short verification on all nets
  • Kiểm tra trở kháng bằng thiết bị TDR±5% tolerance verified per lot
  • Thermal Cycling — -40°C to +150°CPer IEC 60068-2-14 on qualification lots
  • Phân tích vi cắt và cắt ngangBlind / buried via integrity check
  • Ion Chromatography — Cleanliness TestThử nghiệm ion tuân thủ tiêu chuẩn IPC-TM-650
  • Báo cáo kiểm tra sản phẩm đầu tiên (FAI)AS9102 / IATF-aligned documentation
Các trường hợp điển hình

Các dự án chúng tôi đã thực hiện

Real automotive PCB challenges — and how we solved them.

EV · Battery Systems

EV Battery Management System

20-layer heavy-copper BMS for a European Tier-1. Full IATF traceability and thermal cycling qualification required.

20oz
Đồng
2k
Units/batch
0ppm
6 batches
Kết quả

Zero field failures. Supplier achieved PPAP approval from OEM on first submission, citing documentation quality as a key factor.

ADAS · 77 GHz Radar

Radar Front-End PCB

8-layer Rogers 4350B board for a forward collision radar module. ±5% impedance, ENIG finish throughout.

77GHz
Tần số
±5%
Trở kháng
98%
Lần đầu tiên
Kết quả

98% first-pass yield on 5,000-unit run. TDR testing confirmed every board met impedance spec before shipment, eliminating customer rework.

Safety · ABS / ESP

ABS Brake Control Unit

12-layer IPC Class 3 board for ABS/ESP. Full FAI, thermal shock -40°C→+130°C and vibration test reports required.

IPC 3
Xây dựng std
12L
Các lớp
FAI
1st submit
Kết quả

FAI passed first submission. Boards cleared 1,000-cycle thermal shock. Customer now sources 3 vehicle platforms through us.

Tại sao lại là HanSphere?

Tại sao lại là các nhà cung cấp cấp 1?
Hãy chọn chúng tôi.

Automotive procurement teams need more than a PCB factory — they need a certified partner with documented processes, fast engineering response and the depth to solve problems before the production line.

IATF
16949 Certified QMS

Automotive quality as standard, not an add-on

IATF 16949 is our baseline. Every process is documented, every batch is traceable and our audit records are available on request — no upcharge, no special treatment required.

8h
Thời gian hoàn thành DFM

Engineering review before a single board is made

Our automotive engineers review your Gerbers for stack-up, thermal and DFM issues within 8 hours — catching problems before they become costly production failures or OEM rejections.

0ppm
Target defect rate

100% tested. No exceptions.

Every automotive board is electrically tested, AOI and X-ray inspected before shipment. We apply the same zero-defect standard regardless of quantity, prototype or production.

DDP
Hơn 40 quốc gia

One partner, global supply chain

Door-to-door delivery to Tier-1 plants in Germany, USA, Japan and beyond. NDA standard. English-speaking engineering and account teams across all time zones.

FAQ

Các câu hỏi thường gặp

Common questions about ordering PCBs, working with our engineering team and managing quality.

We accept Gerber RS-274X, ODB++, IPC-2581 and native PCB design files (Altium, Eagle, KiCad, Cadence). For assembly orders, we additionally require BOM (Excel/CSV) and centroid/pick-and-place files. All files should be supplied as a single ZIP archive.

No MOQ on prototypes — we accept 1-up orders. For production orders, typical minimum is 10 panels (equivalent unit quantity depends on panelisation). We recommend discussing your expected volume at enquiry stage so we can optimise the panel layout for your cost target.

Every order includes a full DFM review covering: stackup vs impedance targets, trace width and spacing vs design rules, drill sizes and aspect ratios, copper weight distribution, solder mask and silkscreen clearances, surface finish compatibility, and panelisation recommendations. The report is returned within 8 working hours — free of charge, with no commitment required.

Standard prototype lead time is 5 working days from Gerber approval. A 48-hour express service is available for most standard and HDI multilayer builds — ask at enquiry stage. Delivery is DDP (Delivered Duty Paid) to your door via DHL Express or FedEx Priority worldwide. Lead times for speciality laminates (Rogers, heavy copper, rigid-flex) are quoted per order.

Yes — NDA signing is standard practice before any design files are shared. We use a mutual NDA covering all confidential information exchanged during the business relationship. Our standard NDA is provided within 24 hours of request; we can also review and sign your company's preferred NDA template.

Our quality certifications include: ISO 9001:2015 (general quality management), IATF 16949:2016 (automotive), ISO 13485:2016 (medical devices), IPC-A-600 Class 2/3, UL E-File, RoHS and REACH. All boards are 100% electrically tested and AOI inspected as standard. Full certification documents and third-party audit reports are available on request.

Yêu cầu báo giá

Bắt đầu hành trình với ô tô của bạn
Dự án PCB hôm nay.

Our automotive engineering team will review your design and return a full DFM report and quote within 8 working hours.

  • Dịch vụ đánh giá DFM được bao gồm trong mọi yêu cầu tư vấn
  • NDA signed on request — standard practice
  • Có sẵn tài liệu về tiêu chuẩn IATF 16949
  • Trả lời trong vòng 8 giờ làm việc
  • Không cần cam kết để nhận báo giá
Request Automotive PCB Quote All files encrypted · Max 80MB per upload · NDA available

Yêu cầu báo giá

Vui lòng điền thông tin chi tiết vào phần dưới đây và chúng tôi sẽ liên hệ lại với quý vị trong thời gian sớm nhất.

WhatsApp