DIP Assembly — Through-Hole Technology

Through-Hole Assembly Built for
Mechanical Strength & High Current

From automatic axial/radial insertion to wave and selective soldering — durable through-hole assembly for connectors, transformers, relays and power components that need joints stronger than SMT alone can deliver.

IPC-A-610 Loại 2 / 3 Wave & Selective Soldering Hand-Solder Rework High Current-Carrying Joints
100%
Joints visually inspected
IPC 2/3
Solder joint acceptance class
3d
Standard THT lead time
99%
Joint pull-strength pass rate
600+
THT / mixed assembly projects delivered
IPC A-610
Class 2/3 solder joint standard
5d
Standard wave/selective solder lead time
100 %
Visual inspection on every joint
Các ngành công nghiệp mà chúng tôi phục vụ

Where mechanical strength
can't be compromised

Wherever a joint needs to survive vibration, current or mechanical load. Hover to explore.

01

Điện tử ô tô

Connectors, relays and ignition coils hand- or wave-soldered for vibration-resistant, high-reliability mechanical joints under the hood.

02

Thiết bị y tế

Power supply connectors and terminal blocks in diagnostic equipment, built to IPC-A-610 Class 3 joint reliability standards.

03

Tự động hóa công nghiệp

Heavy-duty terminal blocks, transformers and contactors on control panel boards — wave and hand-soldered for years of continuous duty.

04

Điện tử tiêu dùng

Power adapters, audio jacks and connectors needing manual or automatic through-hole insertion for durable everyday handling.

05

Viễn thông & 5G

Power supply boards with high-current connectors for base station equipment, wave-soldered for reliable current-carrying joints.

06

Hàng không vũ trụ và Quốc phòng

Mission-critical connectors and relays hand-soldered to AS9100D and IPC-A-610 Class 3, with full pull-strength documentation.

07

IoT và các thiết bị thông minh

Battery connectors and antenna mounts assembled for mechanical robustness where a plug-in connection sees repeated stress.

08

Energy & Power Electronics

Transformers, inductors and high-current terminals for inverters and power converters — hand-soldered where mechanical strength is critical.

Quy trình của chúng tôi

From kitting to inspected joint —
built for strength

Through-hole joints carry mechanical load and high current that surface-mount alone can't handle. Every step below protects that reliability.

01

Kitting & Component Preparation

Leads are formed and cut to spec, components are verified against the BOM and moisture-sensitive parts are handled per J-STD-033 before they ever reach the line — preventing insertion errors and lead-related defects downstream.

BOM verification · lead forming · MSD handling
02

Automatic Axial / Radial Insertion

Automated insertion machines place axial components (resistors, diodes) and radial components (capacitors) at high speed with repeatable ±0.1mm accuracy, reserving manual insertion for components that don't fit automated tooling.

±0.1mm insertion accuracy · axial & radial · high-speed sequencing
03

Wave & Selective Soldering

Wave soldering runs controlled pot temperature and conveyor angle for consistent barrel fill across double-sided and mixed-technology boards. On dense boards where through-hole components sit near SMT parts, selective soldering targets only the intended joints — leaving reflowed components undisturbed.

controlled pot temp · selective nozzles · mixed SMT+THT
04

Trim & Form / Hand-Soldering

Leads are trimmed and formed to spec, and connectors, transformers, relays and large electrolytic capacitors are hand-soldered by J-STD-001 trained operators where extra mechanical strength or high current-carrying capacity is required.

J-STD-001 trained · connectors & transformers · mechanical strength
05

Inspection & Test

Every joint is visually inspected against IPC-A-610 acceptance criteria, with pull-strength and mechanical robustness testing sampled per lot, followed by ICT or functional test as specified by the customer.

100% visual inspection · pull-strength sampling · ICT / functional test
Equipment & Component Capabilities

Purpose-built equipment for
joints that carry load

Every insertion and soldering process runs in-house — no critical step is outsourced.

Component Insertion

Automatic Axial & Radial Insertion

Automated insertion equipment handles axial components (resistors, diodes) and radial components (capacitors) at repeatable ±0.1mm accuracy, with manual insertion reserved for connectors and non-standard parts that don't fit automated tooling.

±0.1mm insertion accuracy axial & radial leads high-speed sequencing
Get a Quote →
Wave Soldering

Controlled Wave Solder Systems

Precision wave solder machines run controlled pot temperature profiles and conveyor angle for consistent through-hole barrel fill across double-sided and mixed-technology boards, supporting both leaded and lead-free solder alloys.

pot temp 250–265°C controlled dual-wave capability lead-free & leaded alloys
Get a Quote →
Hàn chọn lọc

Selective Soldering for Mixed Boards

Programmable selective soldering systems solder only targeted through-hole joints on densely populated mixed-technology boards, protecting nearby SMT components from the thermal stress a full wave pass would cause.

mini-wave / drag nozzles localized thermal profiles mixed SMT+THT boards
Get a Quote →
Hand Soldering

Manual Assembly & Rework Stations

J-STD-001 trained operators at ESD-safe hand-solder stations assemble connectors, transformers, relays and large electrolytic capacitors that need extra mechanical strength, high current-carrying capacity, or simply don't fit an automated process.

J-STD-001 trained operators ESD-safe stations connector / transformer specialization
Get a Quote →
Thông số kỹ thuật

Built to IPC-A-610
Class 2/3.

Every parameter below is verified against IPC-A-610 through-hole solder joint acceptance criteria. Pull-strength and mechanical robustness reports ship with every order on request.

  • 100%
    Joints visually inspected
  • IPC 2/3
    Solder joint standard
  • ±0.1mm
    Insertion accuracy
  • 99%
    Pull-strength pass rate
Request Capability Sheet →
Tham sốDIP / THT Assembly SpecTình trạng
Component Lead Diameter0.4mm – 1.2mm (axial/radial)Còn hàng
Insertion Accuracy±0.1mm placement repeatabilityCòn hàng
Wave Solder Pot Temperature250°C – 265°C, controlled ±2°CCòn hàng
Selective Soldering Nozzle1.5mm – 12mm programmable nozzlesCòn hàng
Phạm vi kích thước bảng50×50mm – 460×400mm (panel)Còn hàng
Độ dày tấm ván0.8mm – 3.2mmCòn hàng
Mixed SMT + THT SupportYes — selective soldering standardCòn hàng
Solder AlloyLeaded (Sn63Pb37) & lead-free (SAC305)Còn hàng
Tiêu chuẩn xây dựng IPCClass 2 default · Class 3 on requestCòn hàng
Thời gian thực hiện3–5 day standard / expedited on requestCòn hàng
MOQNo MOQ on prototype assemblyCòn hàng
Chất lượng và Tuân thủ

Các quy trình đã được chứng nhận mà đội ngũ đảm bảo chất lượng của quý vị có thể tiến hành kiểm toán.

Every through-hole joint is built and inspected against IPC-A-610 and J-STD-001 acceptance criteria, with pull-strength documentation available on request for connector, transformer and power-component assemblies.

IPC-A-610 Loại 2 / 3
Through-hole & mixed assembly solder joint standard
J-STD-001
Requirements for soldered electrical/electronic assemblies
ISO 9001:2015
Hệ thống quản lý chất lượng được kiểm toán bởi bên thứ ba
IATF 16949:2016
Automotive assembly quality system
AS9100D
Aerospace quality management
Tuân thủ các tiêu chuẩn RoHS / REACH
Có sẵn bản khai đầy đủ về thành phần vật liệu

Phương pháp thử nghiệm và kiểm tra

  • 100% Visual Inspection per IPC-A-610Every through-hole joint checked
  • Solder Joint Pull-Strength TestingMechanical robustness verification, sampled per lot
  • Kiểm tra trong mạch (ICT)Open/short and component value verification
  • Kiểm tra bằng đầu dò bayFixtureless — ideal for prototype and low-volume runs
  • Functional Test (FCT)Per customer test specification
  • Thermal Cycling / Vibration TestOn request for automotive & aerospace builds
  • Kiểm tra sản phẩm đầu tiên (FAI)Documented on the first production run
Các trường hợp điển hình

Các dự án chúng tôi đã thực hiện

Real DIP / through-hole assembly challenges — and how we solved them.

Industrial · Power Supplies

High-Current Terminal Block Assembly

Wave-soldered power supply board with heavy-gauge terminal blocks and transformers for an industrial control panel manufacturer.

265°C
Pot temp
100%
Inspected
0
Rework
Kết quả

Consistent barrel fill across 8,000 boards with zero wave-solder related field returns; the customer eliminated their incoming solder-joint inspection step.

Automotive · Ignition & Relay

Selective Soldering on Mixed SMT + THT Board

Dense automotive relay control board combining fine-pitch SMT components with through-hole relay sockets — selective soldering avoided reflow damage to nearby SMT parts.

Sel.
Soldering
0
SMT damage
99.7%
Năng suất
Kết quả

Zero thermal damage to adjacent SMT components across a 15,000-unit run; the selective soldering profile is now used as the customer's reference process.

Energy · Power Electronics

Hand-Soldered Transformer Assembly

Large toroidal transformers and high-current connectors hand-soldered to IPC-A-610 Class 3 on a solar micro-inverter board.

IPC 3
Xây dựng std
99%
Pull-strength
5d
Thời gian thực hiện
Kết quả

100% pull-strength sample pass rate across 3 production lots; the customer's field return rate for solder-joint failures dropped to zero.

Tại sao lại là HanSphere?

Why engineers trust us
with joints that carry load.

Through-hole assembly is chosen precisely because a joint needs to be stronger, or carry more current, than SMT alone can deliver. Our process is built around that requirement, not around it.

100%
Joints visually inspected

Every joint checked, not just sampled

Wave, selective and hand-soldered joints are 100% visually inspected against IPC-A-610 acceptance criteria before a board ships — sampling isn't an option when mechanical strength is the point.

IPC 3
Class 3 available

Built to the standard your industry demands

IPC-A-610 Class 2 is our baseline; Class 3 high-reliability build is available for automotive, aerospace and medical customers where every joint must survive the full product lifetime.

99%
Pull-strength pass rate

Mechanically robust, not just electrically sound

Solder joint pull-strength testing verifies that connectors, transformers and power components hold under mechanical load — not just that they pass a continuity check.

3d
Standard lead time

Fast turnaround without cutting inspection corners

Standard THT and mixed-assembly lead time is 3–5 days, with wave, selective and hand-soldering scheduled in parallel — inspection and pull-strength sampling are never skipped to hit a date.

FAQ

Các câu hỏi thường gặp

Common questions about DIP / through-hole assembly, soldering methods and inspection.

Wave soldering passes the entire underside of the board through a molten solder wave, ideal for boards that are purely through-hole or have SMT components rated for the wave process. Selective soldering targets only specific through-hole joints using a programmable nozzle, which is required when THT components sit close to SMT parts that would be damaged by a full wave pass. We'll recommend the right process at DFM review based on your layout.

Yes — mixed-technology assembly is one of our most common builds. SMT components are placed and reflowed first, then through-hole components are inserted and soldered using wave or selective soldering, chosen to protect the already-reflowed SMT joints. See our dedicated SMT Assembly service for the surface-mount side of the process.

Both. Automated wave and selective soldering handle the bulk of standard through-hole joints, but connectors, transformers, relays and large electrolytic capacitors that need extra mechanical strength or don't fit automated tooling are hand-soldered by J-STD-001 trained operators at ESD-safe stations.

All through-hole joints are built and visually inspected to IPC-A-610 Class 2 as standard, with Class 3 high-reliability build available on request for automotive, aerospace and medical applications. Every order can include a J-STD-001 compliant process record.

Yes. Pull-strength and mechanical robustness testing is sampled per lot on connector and power-component joints, verifying the joint holds under load — not just that it passes an electrical continuity check. Reports are available on request.

Standard lead time for through-hole and mixed-technology assembly is 3–5 working days from confirmed BOM and Gerbers, depending on component sourcing, hand-soldering content and volume. Expedited scheduling is available on request.

Yêu cầu báo giá

Start your DIP / through-hole
Dự án lắp ráp hôm nay.

Our through-hole assembly team will review your BOM and layout and return a full DFM report and quote within 24 working hours.

  • Dịch vụ đánh giá DFM được bao gồm trong mọi yêu cầu tư vấn
  • NDA signed on request — standard practice
  • IPC-A-610 Class 2/3 documentation available
  • Trả lời trong vòng 24 giờ làm việc
  • Không cần cam kết để nhận báo giá
Request DIP Assembly Quote All files encrypted · Max 80MB per upload · NDA available

Yêu cầu báo giá

Vui lòng điền thông tin chi tiết vào phần dưới đây và chúng tôi sẽ liên hệ lại với quý vị trong thời gian sớm nhất.