Telecommunications PCB

Giải pháp PCB cho
Viễn thông

From 5G base stations and optical transceivers to satellite communication and network infrastructure — high-frequency, high-reliability PCBs engineered for the demands of modern telecom.

Rogers / PTFE Laminates Up to 77 GHz Khả năng xử lý 30 lớp Loại 2 / 3 theo tiêu chuẩn IPC
77GHz
Max operating frequency
32L
Dung sai trở kháng
±5%
Số lớp tối đa
0.1mm
Đường kính lỗ via laser tối thiểu
77GHz
Max operating frequency
32L
Số lớp tối đa
±5%
Trở kháng được điều khiển
Rogers
4350B / 3003 / RO4003C
Ứng dụng

Where our boards power
the connected world

Modern telecommunications infrastructure demands RF performance that standard PCB materials simply cannot deliver. We specialise in the boards that make it possible.

01

5G mmWave Beamforming Antennas

Hybrid Rogers 4350B / FR4 boards with cavity-milled patch apertures and TDR-verified impedance on 100+ antenna feed lines for massive MIMO array modules.

02

Base Station Radio Units

12- to 20-layer hybrid RF/digital multilayer boards combining RF-grade outer layers with FR4 cores for cost-optimised 28/39 GHz small cell and macro radio electronics.

03

RF Power Amplifier Boards

Thermal-via-array and embedded-coin constructions dissipating hundreds of watts per board, keeping junction temperatures in spec on high-power 5G PA modules.

04

Data Centre Switch Backplanes

20- to 30-layer sequential lamination boards with back-drilled vias and ENEPIG press-fit finish, routing 112 Gbps PAM4 lanes for 400G/800G line cards.

05

Satellite Ku/Ka-Band Transceivers

16-layer Taconic TLY low-loss laminate boards with gold-plated RF connectors for LEO and GEO satellite transceiver modules qualified to thermal vacuum standards.

06

Optical Transceiver Modules

Controlled-impedance HDI boards on Rogers RO4003C with tight ±0.5 mil trace tolerance, supporting high-speed electrical-to-optical signal conversion in pluggable modules.

07

Network Switch Line Cards

Sequential-lamination backplanes up to 30 layers with dozens of differential-pair structures, routed to eliminate crosstalk and modal resonance across the chassis.

08

Fixed Wireless Access Terminals

Hybrid Rogers/FR4 multilayer boards with TDR/VNA-verified ±5% impedance, packing sub-6 GHz and mmWave radios into compact outdoor CPE enclosures.

Thử thách Kỹ thuật

Why telecom PCBs demand
specialist RF expertise

At millimetre-wave frequencies, the PCB is no longer just a circuit carrier — it is an active part of the RF system. Material choice, trace geometry and fabrication tolerance directly affect signal performance.

01

Signal Integrity at mmWave Frequencies

At 28 GHz, 39 GHz and 77 GHz, dielectric loss in standard FR4 renders the board electrically invisible to the RF signal. Rogers, Taconic and PTFE-based laminates are mandatory. Trace width tolerance must be held to ±0.5 mil to maintain consistent impedance within ±5%.

Rogers 4350B / PTFE · ±0.5 mil trace tolerance · ±5% impedance
02

High-Layer-Count Signal Management

Modern network switches and base station radio units require 20–30 layer boards with dozens of controlled impedance structures — differential pairs, coplanar waveguides and microstrip lines — all routed without crosstalk or modal resonance.

up to 30 layers · differential pairs · crosstalk control
03

Thermal Management in High-Power RF

5G power amplifier boards dissipate hundreds of watts per board in compact form factors. Thermal vias, embedded coin cooling and back-side thermal pads must be designed and fabricated to tight tolerances to keep junction temperatures within spec.

thermal via arrays · coin embedding · back-side pad
Công nghệ bảng mạch

The right laminate for
every frequency band

High-frequency performance begins with material selection. We stock and process the full range of RF-grade laminates.

5G mmWave · Radar · Satellite

Bảng mạch in tần số cao (RF)

Rogers 4350B, RO4003C, Taconic TLY and PTFE laminates for sub-6 GHz through 77 GHz applications. ENIG finish for consistent insertion loss. Controlled cavity milling for waveguide integration. TDR and VNA verification available.

Rogers / PTFE / Taconic lên đến 77 GHz ENIG + cavity milling
Get a Quote →
Data Centre · Network Switches

High-Layer-Count Backplane

20 to 30 layer sequential lamination boards for data centre switches and 400G / 800G line cards. Controlled impedance on all signal layers, back-drill for via stub removal, ENEPIG finish for press-fit connector compatibility.

tối đa 30 lớp back-drill ENEPIG / press-fit
Get a Quote →
Base Station · Small Cell

Hybrid RF / Digital Multilayer

Hybrid stackups combining RF-grade laminates on outer layers with standard FR4 cores for digital processing — delivering RF performance where it matters without the cost of all-Rogers construction.

hybrid Rogers + FR4 impedance-matched cost-optimised
Get a Quote →
Thông số kỹ thuật

Được thiết kế dành riêng cho ngành ô tô
thông số kỹ thuật.

Mỗi thông số dưới đây đều được kiểm tra để đảm bảo tuân thủ các yêu cầu của tiêu chuẩn IATF 16949 và IPC-A-600 Loại 3. Báo cáo thử nghiệm đầy đủ và thông tin truy xuất nguồn gốc vật liệu được gửi kèm theo mỗi đơn hàng.

  • 77GHz
    Hỗ trợ tần số tối đa
  • 30L
    Số lớp tối đa
  • ±5%
    Dung sai trở kháng
  • 0.10mm
    Đường kính lỗ via laser tối thiểu
Request Capability Sheet →
Tham sốTiêu chuẩn dành cho ngành ô tôTình trạng
Số lớp2 – 30 layers with sequential laminationCòn hàng
Khoảng cách tối thiểu / Khoảng trống2,5 / 2,5 milCòn hàng
Trở kháng được điều khiển±5% tolerance, TDR / VNA verifiedCòn hàng
Tấm laminate RFRogers 4350B / RO4003C / Taconic / PTFECòn hàng
Tần số hoạt động tối đaUp to 77 GHzCòn hàng
Bề mặt hoàn thiệnENIG / ENEPIG / Immersion AgCòn hàng
Back-Drill CapabilityVia stub removal for high-speed signalsCòn hàng
Phay rãnhWaveguide integration and heat spreader pocketsCòn hàng
Khả năng truy xuất nguồn gốc lô hàngHồ sơ đầy đủ về lô hàng, Giấy chứng nhận xuất xứ (CoC) của vật liệuCòn hàng
Chất lượng và Tuân thủ

RF-verified quality at every stage.

Telecom customers require more than visual inspection — they need RF-grade process control. Our TDR and impedance verification on every board, combined with ENIG finish consistency, ensure your RF performance specification is met before shipment.

ISO 9001:2015
Hệ thống quản lý chất lượng được kiểm toán bởi bên thứ ba
IPC-A-600 Loại 2 / 3
Tiêu chuẩn sản xuất có độ tin cậy cao
RoHS / REACH
Tuân thủ các quy định của EU về chất nguy hại
Quy trình kiểm soát nguồn gốc nguyên liệu (CoC)
Rogers, Taconic and PTFE laminates with traceability

Phương pháp thử nghiệm và kiểm tra

Các trường hợp điển hình

Các dự án chúng tôi đã thực hiện

Real automotive PCB challenges — and how we solved them.

5G · mmWave Base Station

28 GHz 5G Beamforming PCB

12-layer hybrid Rogers 4350B / FR4 board for a 64T64R 5G massive MIMO radio unit. TDR-verified impedance on 128 antenna feed lines, cavity-milled patch antenna apertures.

28GHz
Tần số
12L
Các lớp
128paths
Ant. feeds
Kết quả

All 128 antenna feed lines within ±4.2% impedance specification. RF performance at system test exceeded simulation by +0.8 dB gain. On-time delivery for 3 consecutive production quarters.

Data Centre · 400G Switch

400GbE Line Card Board

28-layer backplane board for a data centre ToR switch. Back-drilled vias for stub removal, ENEPIG finish for press-fit connectors, 112 Gbps PAM4 trace routing.

28L
Các lớp
112Gbps
PAM4 lanes
99%
Lần đầu tiên
Kết quả

99% first-pass electrical yield at production entry. Crosstalk performance 3 dB better than competitive alternative supplier. Now sole-sourced for this platform.

Satellite · LEO Comms

Ku-Band Satellite Transceiver PCB

16-layer Taconic TLY board for a LEO satellite Ka/Ku-band transceiver. Low-loss laminate, gold-plated RF connectors, radiation-screening-compatible construction.

Ku-Ban nhạc
Tần số
16L
Các lớp
LEO
Ứng dụng
Kết quả

Insertion loss 0.9 dB/m at 18 GHz — within 0.1 dB of simulation. Board passed thermal vacuum and vibration qualification on first attempt.

Tại sao lại là HanSphere?

Tại sao lại là các nhà cung cấp cấp 1?
Hãy chọn chúng tôi.

Automotive procurement teams need more than a PCB factory — they need a certified partner with documented processes, fast engineering response and the depth to solve problems before the production line.

77GHz
Tần số tối đa

RF material expertise, not just PCB fabrication

We hold Rogers, Taconic and PTFE laminates in stock and process them in-house. Our RF process engineers understand how material choice, trace width and via geometry affect your link budget.

±5%
Impedance guarantee

TDR-verified impedance on every board

Every controlled-impedance board is measured with our in-house TDR before shipment. If a board doesn't meet spec, it doesn't ship — no exceptions, no negotiations.

30L
Số lớp tối đa

Sequential lamination for complex RF stacks

Up to 30 layers with sequential lamination, back-drill and blind/buried vias. The fabrication complexity your base station or data centre boards demand, handled in-house.

8h
Thời gian hoàn thành DFM

RF DFM review from engineers who understand signal integrity

Our RF engineers review your stackup, trace geometry, via placement and antenna feeds within 8 hours — catching RF performance issues before they become expensive respins.

Yêu cầu báo giá

Bắt đầu hành trình với ô tô của bạn
Dự án PCB hôm nay.

Our telecommunications PCB engineering team will review your design and return a full DFM report and quote within 8 working hours.

  • Dịch vụ đánh giá DFM được bao gồm trong mọi yêu cầu tư vấn
  • NDA signed on request — standard practice
  • Có sẵn tài liệu về tiêu chuẩn IATF 16949
  • Trả lời trong vòng 8 giờ làm việc
  • Không cần cam kết để nhận báo giá
Request Telecom PCB Quote All files encrypted · Max 80MB per upload · NDA available

Yêu cầu báo giá

Vui lòng điền thông tin chi tiết vào phần dưới đây và chúng tôi sẽ liên hệ lại với quý vị trong thời gian sớm nhất.

WhatsApp