From 5G base stations and optical transceivers to satellite communication and network infrastructure — high-frequency, high-reliability PCBs engineered for the demands of modern telecom.
현대 통신 인프라에는 일반적인 PCB 소재로는 도저히 달성할 수 없는 RF 성능이 요구됩니다. 당사는 이를 가능하게 하는 기판 제작을 전문으로 합니다.
대규모 MIMO 어레이 모듈용으로, 캐비티 밀링 공정을 통해 패치 개구부를 형성하고 100개 이상의 안테나 피드 라인에 대해 TDR을 통해 임피던스를 검증한 하이브리드 로저스 4350B/FR4 기판.
RF 등급의 외층과 FR4 코어를 결합한 12~20층 하이브리드 RF/디지털 다층 기판으로, 비용 효율이 최적화된 28/39 GHz 소형 셀 및 매크로 무선 전자 기기에 사용됩니다.
보드당 수백 와트의 열을 방출하는 열 비아 어레이 및 임베디드 코인 구조를 통해, 고출력 5G PA 모듈에서 접합 온도를 사양 범위 내로 유지합니다.
백드릴 비아와 ENEPIG 프레스핏 마감 처리가 적용된 20~30층 순차 적층 기판으로, 400G/800G 라인 카드용 112 Gbps PAM4 레인을 배선합니다.
열진공 기준에 따라 인증된 LEO 및 GEO 위성 송수신기 모듈용, 금도금 RF 커넥터가 장착된 16층 Taconic TLY 저손실 라미네이트 기판.
Controlled-impedance HDI boards on Rogers RO4003C with tight ±0.5 mil trace tolerance, supporting high-speed electrical-to-optical signal conversion in pluggable modules.
수십 개의 차동 쌍 구조를 갖춘 최대 30층의 순차 적층 백플레인으로, 섀시 전반에 걸친 크로스톡과 모달 공진을 제거하도록 배선되었습니다.
Hybrid Rogers/FR4 multilayer boards with TDR/VNA-verified ±5% impedance, packing sub-6 GHz and mmWave radios into compact outdoor CPE enclosures.
At millimetre-wave frequencies, the PCB is no longer just a circuit carrier — it is an active part of the RF system. Material choice, trace geometry and fabrication tolerance directly affect signal performance.
At 28 GHz, 39 GHz and 77 GHz, dielectric loss in standard FR4 renders the board electrically invisible to the RF signal. Rogers, Taconic and PTFE-based laminates are mandatory. Trace width tolerance must be held to ±0.5 mil to maintain consistent impedance within ±5%.
Rogers 4350B / PTFE · ±0.5 mil trace tolerance · ±5% impedanceModern network switches and base station radio units require 20–30 layer boards with dozens of controlled impedance structures — differential pairs, coplanar waveguides and microstrip lines — all routed without crosstalk or modal resonance.
up to 30 layers · differential pairs · crosstalk control5G 전력 증폭기 보드는 소형 폼 팩터임에도 보드당 수백 와트의 열을 방출합니다. 접합부 온도를 사양 범위 내로 유지하기 위해서는 열 비아, 내장형 코인 쿨링 및 후면 열 패드를 엄격한 공차 범위 내에서 설계하고 제작해야 합니다.
thermal via arrays · coin embedding · back-side pad고주파 성능은 소재 선정에서 시작됩니다. 당사는 모든 종류의 RF 등급 라미네이트를 재고로 보유하고 가공합니다.
6 GHz 미만에서 77 GHz까지의 응용 분야에 사용되는 Rogers 4350B, RO4003C, Taconic TLY 및 PTFE 적층판. 일관된 삽입 손실을 위한 ENIG 마감 처리. 도파관 통합을 위한 정밀 캐비티 밀링. TDR 및 VNA 검증 가능.
데이터 센터 스위치 및 400G/800G 라인 카드용 20~30층 순차 적층 기판. 모든 신호층에 임피던스 제어 적용, 비아 스터브 제거를 위한 백드릴 가공, 프레스핏 커넥터 호환성을 위한 ENEPIG 마감 처리.
Hybrid stackups combining RF-grade laminates on outer layers with standard FR4 cores for digital processing — delivering RF performance where it matters without the cost of all-Rogers construction.
아래의 모든 파라미터는 IATF 16949 및 IPC-A-600 Class 3 요구 사항에 따라 검증되었습니다. 모든 주문에는 전체 시험 보고서와 자재 추적 정보가 함께 제공됩니다.
| 매개변수 | 자동차용 등급 | 상태 |
|---|---|---|
| 레이어 수 | 2 – 30 layers with sequential lamination | 구입 가능 |
| 최소 트레이스 / 스페이스 | 2.5 / 2.5 밀 | 구입 가능 |
| 제어 임피던스 | ±5% tolerance, TDR / VNA verified | 구입 가능 |
| RF 적층판 | Rogers 4350B / RO4003C / Taconic / PTFE | 구입 가능 |
| 최대 작동 주파수 | 최대 77 GHz | 구입 가능 |
| 표면 마감 | ENIG / ENEPIG / 침지식 Ag | 구입 가능 |
| 백드릴 기능 | 고속 신호를 위한 스텁 제거 | 구입 가능 |
| 캐비티 밀링 | 도파관 통합 및 방열판 장착부 | 구입 가능 |
| 로트 추적성 | 완비된 부지 관련 서류, 자재 원산지 증명서(CoC) | 구입 가능 |
Telecom customers require more than visual inspection — they need RF-grade process control. Our TDR and impedance verification on every board, combined with ENIG finish consistency, ensure your RF performance specification is met before shipment.
Real automotive PCB challenges — and how we solved them.
64T64R 5G 매시브 MIMO 무선 유닛용 12층 하이브리드 로저스 4350B/FR4 기판. 128개의 안테나 피드 라인에 대해 TDR을 통해 임피던스 검증이 완료되었으며, 캐비티 밀링 공법으로 가공된 패치 안테나 개구부가 적용되었습니다.
All 128 antenna feed lines within ±4.2% impedance specification. RF performance at system test exceeded simulation by +0.8 dB gain. On-time delivery for 3 consecutive production quarters.
데이터 센터 ToR 스위치용 28층 백플레인 기판. 스텁 제거를 위한 후면 드릴링 비아, 프레스핏 커넥터용 ENEPIG 마감, 112 Gbps PAM4 트레이스 배선.
양산 개시 시 1차 전기 수율 99%. 크로스톡 성능이 경쟁사 대비 3dB 우수. 현재 이 플랫폼에 대한 단독 공급업체로 선정됨.
LEO 위성용 Ka/Ku 대역 송수신기에 사용되는 16층 Taconic TLY 기판. 저손실 라미네이트, 금도금 RF 커넥터, 방사선 차폐에 적합한 구조.
Insertion loss 0.9 dB/m at 18 GHz — within 0.1 dB of simulation. Board passed thermal vacuum and vibration qualification on first attempt.
Automotive procurement teams need more than a PCB factory — they need a certified partner with documented processes, fast engineering response and the depth to solve problems before the production line.
당사는 로저스(Rogers), 타코닉(Taconic) 및 PTFE 라미네이트를 재고로 보유하고 있으며, 이를 사내에서 직접 가공합니다. 당사의 RF 공정 엔지니어들은 소재 선택, 트레이스 폭 및 비아 형상이 고객의 링크 예산에 어떤 영향을 미치는지 잘 이해하고 있습니다.
Every controlled-impedance board is measured with our in-house TDR before shipment. If a board doesn't meet spec, it doesn't ship — no exceptions, no negotiations.
순차적 적층, 백드릴, 블라인드/매립 비아를 적용하여 최대 30층까지 제작 가능합니다. 기지국 또는 데이터 센터 기판에 요구되는 복잡한 제조 공정도 사내에서 직접 처리합니다.
Our RF engineers review your stackup, trace geometry, via placement and antenna feeds within 8 hours — catching RF performance issues before they become expensive respins.
당사의 통신용 PCB 엔지니어링 팀이 귀사의 설계를 검토한 후, 8 근무시간 이내에 상세한 DFM 보고서와 견적서를 보내드리겠습니다.
아래에 세부 정보를 입력해 주시면 곧 연락드리겠습니다.
당사는 사용자 경험을 개선하기 위해 쿠키를 사용합니다. 자세한 내용은 당사의 개인정보 처리방침.