5 dedicated test and inspection methods · 100% coverage on every order · one PCB partner. From first-article AOI scanning through final pre-shipment quality control, every board that leaves our facility passes the full testing stack appropriate to its build — no AQL sampling, no shortcuts, full traceability on every unit.
보드가 조립 라인에 투입되거나 현장에 배포되기 전에 가장 심각한 결함을 포착해내는 세 가지 테스트 항목입니다.
Automated optical inspection scans every board for missing or misaligned components, solder bridging, tombstoning, wrong polarity and insufficient solder — 100% of surface features, every panel.
Explore AOI Inspection →비파괴 2D 및 3D CT X선 이미징을 통해 숨겨진 BGA, QFN 및 CSP 솔더 접합부, 공극 수준, 헤드-인-필로우(head-in-pillow) 결함, PTH 배럴 공극 및 내부 레이어 정렬 상태를 확인할 수 있습니다.
Explore X-Ray Inspection →대량 생산을 위한 베드-오브-네일(Bed-of-nails) 회로 내 테스트, 고밀도 디지털 기판용 바운더리 스캔/JTAG, 하이팟(Hipot) 절연 내압 시험 및 고객 사양에 따른 맞춤형 기능 테스트.
Explore Electrical Testing →서비스 중 하나를 클릭하면 해당 메서드의 세부 정보, 결함 처리 범위 및 귀하의 빌드에 적합한 시기를 확인할 수 있습니다.
Multi-camera optical scanning for placement, solder and silkscreen defects — 100% of every panel.
보기 기능숨겨진 BGA/QFN 솔더 접합부, 공극, 헤드-인-필로우(head-in-pillow) 및 PTH 배럴 공극을 확인하기 위한 2D/3D CT 영상 촬영.
보기 기능Fixtureless electrical test direct from CAD/Gerber data — no tooling cost, no lead time, ideal for prototypes.
보기 기능대량 생산용 ‘네일 베드(Bed-of-nails)’ ICT, 바운더리 스캔/JTAG, 하이팟(hipot) 테스트 및 맞춤형 기능 테스트.
보기 기능최종 단계에서 제품별 외관 및 치수 검사, 포장/MSL/ESD 점검 및 추적 가능하도록 묶음 처리.
보기 기능자신의 빌드에 어떤 검사 또는 테스트 방법이 가장 적합한지 잘 모르겠다면, 다음 두 가지 광범위한 범주 중 하나부터 시작해 보세요.
Whether your board goes through optical scanning, X-ray imaging or bed-of-nails electrical test, our reporting, traceability, quoting and shipping process is identical — only the equipment and defect coverage change to match your build.
Every job — from a single flying-probe prototype to a full ICT production run — ships with a digital test report inside 24 hours of completion.
Every unit's test data is logged and traceable back to panel, lot and operator — applied across AOI, X-ray, electrical and final inspection alike.
Getting a test method recommendation and quote never requires committing to fixture, probe-bed or programming cost upfront — regardless of which method you need.
테스트를 거친 보드는 어떤 테스트 방법이 사용되었든 상관없이, 전체 테스트 보고서, 추적성 및 규정 준수 관련 문서 패키지가 포함된 상태로 전 세계로 DDP 조건으로 배송됩니다.
아래에서 궁금한 점을 해결하지 못하셨다면, 당사의 엔지니어링 팀이 귀하의 구체적인 테스트 요구 사항에 대해 기꺼이 상담해 드리겠습니다.
It depends on your volume, component mix and risk profile. Prototypes and low-volume runs typically use flying probe testing (no tooling, fast turnaround). High-volume production usually adds bed-of-nails ICT for speed and cost efficiency. Boards with BGA, QFN or CSP packages get X-ray inspection for hidden joints, and every board — regardless of volume — gets AOI and final inspection. Send us your BOM and Gerbers and we'll recommend the right combination at no charge.
Yes — this is standard practice, not an exception. A typical production order runs AOI on every panel, X-ray on any BGA/QFN/CSP assemblies, electrical test (flying probe or ICT depending on volume) on 100% of units, and a final visual/dimensional inspection before packaging. The combination is selected to match your design's risk areas.
AOI, 최종 검사 및 표준 전기적 연속성 테스트는 별도의 항목 없이 모든 PCB 견적 가격에 포함되어 있습니다. X-ray 검사, 바운더리 스캔/JTAG, 하이팟 절연 내압 테스트 및 고객 사양에 따른 맞춤형 기능 테스트는 귀사의 BOM, 고정구 요구 사항 및 테스트 범위 깊이에 따라 달라지므로 별도로 견적됩니다.
모든 주문에는 디지털 테스트 보고서 패키지가 함께 제공됩니다. 여기에는 AOI 결함 기록, 해당되는 경우 X-ray 이미지, 제품별 전기적 테스트 합격/불합격 데이터, 그리고 최종 검사 체크리스트가 포함됩니다. 요청 시, 각 제품을 해당 패널 및 테스트 실행 내역과 연결하는 일련번호 기반 추적성 데이터와 IPC-A-610 제작 품질 인증서를 제공해 드립니다.
Yes — AOI, X-ray, flying probe, ICT and final inspection are all available as standalone services on boards or assemblies you supply, including consigned inventory. We'll need your Gerber/CAD data and BOM to program fixtureless test coverage, or your existing fixture if one is provided.
Yes — flying probe testing was built specifically for 1-up and low-volume prototype work since it requires no fixture or tooling lead time. As volume scales, we transition to bed-of-nails ICT for speed and per-unit cost efficiency. AOI, X-ray and final inspection run at 100% coverage regardless of order size.
Whatever stage your project is at — engineering prototype or high-volume production — our team will return a DFM/DFT review and quote within 8 working hours, with the right test method combination identified.
아래에 세부 정보를 입력해 주시면 곧 연락드리겠습니다.
당사는 사용자 경험을 개선하기 위해 쿠키를 사용합니다. 자세한 내용은 당사의 개인정보 처리방침.