PCBの試験・検査サービス

すべてのボードが検証済みです。
出荷時の欠陥ゼロ。

5 dedicated test and inspection methods · 100% coverage on every order · one PCB partner. From first-article AOI scanning through final pre-shipment quality control, every board that leaves our facility passes the full testing stack appropriate to its build — no AQL sampling, no shortcuts, full traceability on every unit.

すべてのテスト注文において
5
専用の検査・試験方法
100%
出荷前に基板の電気的検査を実施
20µm
Sub-20µm AOI defect resolution
24h
試験報告書の納期
IPC-A-610 2・3組
施工基準
100%
AQLサンプリングではなく、テストカバレッジ
ISO 9001/IATF 16949
認証を受けた品質管理
AS6081
偽造防止とトレーサビリティ
試験分野別

カテゴリー別にテスト方法を探す

ご自身のビルドに最適な検査や試験方法がわからない場合は、まず以下の2つの大まかなカテゴリーのいずれかから始めてみてください。

光学・画像検査

カメラおよびX線を用いた欠陥検出

電気・機能試験

フィクスチャを使用しない電気的検証とフィクスチャを使用した電気的検証
すべての試験方法に共通する点

変わらない基準
試験方法間で。

Whether your board goes through optical scanning, X-ray imaging or bed-of-nails electrical test, our reporting, traceability, quoting and shipping process is identical — only the equipment and defect coverage change to match your build.

24h
レポートの処理期間

24時間以内に発行される試験報告書

Every job — from a single flying-probe prototype to a full ICT production run — ships with a digital test report inside 24 hours of completion.

100%
トレーサビリティ

完全なシリアル化データロギング

Every unit's test data is logged and traceable back to panel, lot and operator — applied across AOI, X-ray, electrical and final inspection alike.

ゼロ
金型費

見積もりを依頼するのに、金型への投資は必要ありません

Getting a test method recommendation and quote never requires committing to fixture, probe-bed or programming cost upfront — regardless of which method you need.

グローバル
DDP輸送

完全な書類を添付した戸別配送

検査済みの基板は、どの検査方法が採用されたかに関わらず、完全な検査報告書、トレーサビリティ情報、およびコンプライアンス関連書類一式を同梱し、DDP条件で世界中へ発送されます。

FAQ

PCBの試験・検査に関するよくある質問

以下の内容で疑問が解消されない場合は、当社のエンジニアリングチームが、お客様の具体的なテスト要件について喜んでご相談に応じます。

It depends on your volume, component mix and risk profile. Prototypes and low-volume runs typically use flying probe testing (no tooling, fast turnaround). High-volume production usually adds bed-of-nails ICT for speed and cost efficiency. Boards with BGA, QFN or CSP packages get X-ray inspection for hidden joints, and every board — regardless of volume — gets AOI and final inspection. Send us your BOM and Gerbers and we'll recommend the right combination at no charge.

Yes — this is standard practice, not an exception. A typical production order runs AOI on every panel, X-ray on any BGA/QFN/CSP assemblies, electrical test (flying probe or ICT depending on volume) on 100% of units, and a final visual/dimensional inspection before packaging. The combination is selected to match your design's risk areas.

AOI、最終検査、および標準的な電気的導通試験は、すべてのPCB見積価格に含まれており、別途の項目として追加料金は発生しません。X線検査、バウンダリスキャン/JTAG、ハイポット絶縁耐力試験、およびお客様のご仕様に基づくカスタム機能試験については、お客様のBOM、治具の要件、および試験範囲の深度によって異なるため、別途お見積もりいたします。

ご注文いただいたすべての製品には、デジタル試験報告書一式が同梱されます。これには、AOI欠陥ログ、該当する場合はX線画像、各ユニットごとの電気的試験の合否データ、および最終検査チェックリストが含まれます。ご要望に応じて、各ユニットをそのパネルおよび試験実行に紐づけるシリアル番号付きのトレーサビリティデータや、IPC-A-610に基づく製造品質証明書もご提供可能です。

Yes — AOI, X-ray, flying probe, ICT and final inspection are all available as standalone services on boards or assemblies you supply, including consigned inventory. We'll need your Gerber/CAD data and BOM to program fixtureless test coverage, or your existing fixture if one is provided.

Yes — flying probe testing was built specifically for 1-up and low-volume prototype work since it requires no fixture or tooling lead time. As volume scales, we transition to bed-of-nails ICT for speed and per-unit cost efficiency. AOI, X-ray and final inspection run at 100% coverage regardless of order size.

お見積りをご依頼ください

Send us your project — we'll recommend the right test coverage.

Whatever stage your project is at — engineering prototype or high-volume production — our team will return a DFM/DFT review and quote within 8 working hours, with the right test method combination identified.

  • 当社のエンジニアリングチームが推奨する試験方法
  • DFM/DFTのレビューを含む
  • 要請に基づきNDAを締結しました
  • 8営業時間以内にご返信いたします
  • お見積もりのご依頼に、ご契約の義務は一切ありません
見積もりの依頼 All files encrypted · Max 80MB · Gerber/CAD and BOM welcomed

お見積りのお申し込み

以下の詳細をご記入ください。折り返しご連絡いたします。

WhatsApp