短納期PCB製造

短納期PCB
プロトタイピング

Bare-board fabrication scheduled around your deadline — same-day 2-layer through 72-hour multilayer, with expedited CAM review and no minimum order quantity.

当日 / 24時間 / 48時間 / 72時間 2 – 16 Layers 最小注文数量なし オンライン即時見積もり
24h
最速の多層構造
0d
当日仕上げ・2層仕上げオプション
16L
72時間以内の最大レイヤー数
1pc
最低注文数量なし
<2h
CAM/技術レビュー
クイックターンPCB製造とは

標準的な処理順序ではなく、お客様の納期に合わせて基板の製造スケジュールを調整します

Quick-turn PCB fabrication compresses the standard bare-board production schedule — engineering review, imaging, drilling, lamination and finishing — into a committed turnaround window as short as same-day for simple boards and 24-72 hours for multilayer designs. This is fabrication speed, not assembly speed: it gets bare, tested boards into your hands fast so your team or your assembly partner can populate them immediately.

この短納期化は、工程を省略するのではなく、プレス加工サイクル、スロット加工、およびCAM設計リソースを、標準の生産キューよりも優先して急ぎの案件に割り当てることで実現されています。短納期の基板であっても、標準リードタイムの注文と同様に、すべての基板が同じ電気的試験およびAOI検査に合格しています。

層数は、実現可能な納期を左右する主な要因です。シンプルな2層基板であれば当日出荷が可能ですが、8~16層の設計の場合は、複数の積層工程に対応するため、48~72時間の全期間を要します。即時見積もりの際に、納期と層数を照らし合わせて確認しておくことで、後々の期待値のズレを防ぐことができます。

Get Quick-Turn Quote →
短納期PCB製造
Same-Day – 72h 2–16 Layers 最小注文数量なし 即時見積もり CAM審査の迅速化
技術と特長

達成可能なターンアラウンドを左右する3つの仕様決定

Turnaround is not a single number — it is a function of layer count, complexity and how fast the engineering review clears the file.

01

層数によって処理時間の下限が決まる

Each additional lamination cycle adds press time, cooldown and re-drill steps that cannot be compressed below a physical minimum. 2-layer boards can be imaged, etched and finished same-day. 4-6 layer boards typically need 24-48 hours for a single press cycle plus drilling and finishing. Boards above 8 layers require multiple sequential lamination cycles and realistically need the full 48-72 hour window — quoting a 16-layer board for 24-hour turnaround is not a real option, and we tell customers that up front rather than over-promise.

2L same-day · 4-6L 24-48h · 8-16L 48-72h
02

CAM審査の迅速化により、待ち行列は解消されるが、審査そのものは行われる

Every job, rush or standard, goes through CAM/DFM review — checking drill-to-copper clearance, minimum trace/space, annular ring and panelization before production release. For quick-turn orders, this review is expedited to a dedicated engineer with a target turnaround under 2 hours instead of joining a standard review queue, so the clock on your fabrication window starts sooner without skipping the check itself.

expedited CAM/DFM · <2h engineering review · same design rule checks
03

小ロット・最低発注数量なしのスケジュール管理により、急ぎの仕事を印刷機の空き稼働時間に組み込む

Rush jobs are typically low quantity — one to a few dozen boards. We schedule quick-turn orders into open slots on drilling and lamination equipment between standard production runs, rather than requiring a minimum order quantity to justify a dedicated run. This is what makes true single-piece prototype turnaround economically viable alongside standard production volume.

no MOQ · single-piece to small-batch · open-slot scheduling
技術仕様

クイックターンPCB製造の完全仕様書

納期区分は、CAMリリースからの暦日単位の納期であり、ご注文の前に即時見積もり段階で確定されます。

ターンアラウンドおよび製造パラメータ

当日仕上げ2層、標準仕様のみ
24時間以内の納品2層複合 / 4層標準
48時間以内の納品最大8層
72時間以内の納品最大12~16層
最小注文数量1 piece — no MOQ

性能と基準

CAM/技術レビュー<2時間、優先ラッシュキュー
表面仕上げ(Rush対応)HASL · ENIG · OSP
IPC構築基準Class 2 default · Class 3 on request (adds time)
ラッシュ時割増料金処理期間による段階別料金:当日処理が最上位、5日以内が標準=追加料金なし
引用アップロードしたGerber/ODB++ファイルからの即時オンライン見積もり
製造工程

短納期注文が工場内をどのように処理されていくか

The same fabrication steps as standard production — compressed and prioritized, not shortened.

01
ステップ 01

「即時見積もり&緊急CAM」レビュー

Gerber/ODB++ファイルをアップロードすると、納期オプション付きのオンライン見積もりを即座に取得できます。専任のエンジニアが、ご注文確定後2時間以内に設計ルールおよびCAMレビューを完了します。

02
ステップ 02

Priority Imaging & Etch

この案件は、標準キューの生産に先立ち、次に利用可能なイメージングおよびエッチングサイクルに組み込まれ、お客様の具体的な生産数量に合わせてパネルレイアウトが最適化されます。

03
ステップ 03

掘削および積層工程のスケジュール短縮

多層のジョブについては、ドリル加工およびラミネート工程を、急ぎの注文用に確保されたプレスの空き枠に組み込み、層数に応じて複数のプレスを連続して稼働させるようにスケジュールを組んでいます。

04
ステップ 04

仕上げ、検査、および速達発送

表面処理、ソルダーマスク、およびレジェンドの印字を施した後、標準注文と同様の100%電気的検査を行い、その後、速達宅配便で直ちに発送されます。

用途

短納期の製造が最適な場合

次の設計決定、納期、あるいは修理が、基板そのものを手に入れることができないために滞ってしまうような状況。

01

研究開発/概念実証(PoC)の検証

本格的な設計サイクルに着手する前に、新しい回路トポロジーや部品フットプリントを検証するための、迅速なベアボードの試作。

02

設計の反復サイクル

レイアウトの不具合やコンポーネントの変更により、前回の基板を修正するのではなく、新しい基板が必要になった場合、リビジョン間の迅速な再設計。

03

緊急の現場交換用部品

現場で故障した機器用の交換用基板を、当日~48時間以内に製造し、長時間の稼働停止を回避します。

04

展示会およびデモの締切日

予定されているデモや展示会に間に合うよう、基板の部品実装と動作確認を完了しなければならない場合における、厳格な納期を伴う製造。

05

スタートアップ向けMVPハードウェア開発

限られた予算とスケジュールの中で迅速に試行錯誤を繰り返す、初期段階のハードウェアチーム向けに、1個からの受注・最小発注数量なしの製造サービスを提供しています。

06

設計変更指示書の検証

ECOが既知の問題を解決していることを確認するための迅速な基板検証を行い、その変更を本格生産に反映させる。

07

顧客向けデモおよび投資家向けプレゼンテーション用ハードウェア

ハードウェアの開発は、標準的な生産スケジュールではなく、決まった納期や顧客との打ち合わせ日程に合わせて進められました。

08

大学および研究機関のプロジェクト

学術研究や助成金による試作開発向けの、小ロットかつ納期重視の基板製造。

製造・品質

Quick-turn quality — the same standard, on a compressed schedule.

Speed is achieved through priority scheduling and a dedicated rush engineering queue — not by reducing inspection. Every quick-turn board receives the same electrical test and AOI as a standard-lead-time order before it ships.

  • ISO 9001:2015第三者による監査を受けた品質管理
  • 国際PCB規格リジッドPCBの認定および性能
  • IPC-A-600 クラス 2 / 3許容基準
  • RoHS / REACHEUの有害物質規制への準拠

検査および試験方法

  • 100% Electrical Test — Flying Probeすべてのネットにおいてオープン/ショート、フィクスチャーのリードタイムなし
  • 100% AOI — All Layers自動光学検査。急ぎの案件であっても例外はありません。
  • CAM/DFM 設計ルールチェック標準リードタイムの注文と同じルールが適用されます
  • 寸法確認ガーバー/ドリルファイルとの外形および穴配置の照合
  • ソルダーマスクの位置合わせチェック視覚的およびAOIによる検証
  • お辞儀とひねりIPC-TM-650 2.4.22
  • 最終目視検査拡大鏡を用いた出荷前100%検査
  • 梱包および発送の確認速達宅配便の集荷前に注文照合を行う
機能の例

当社が製造した短納期注文品

Real deadline-driven fabrication challenges — solved.

Trade Show · Demo Deadline

展示会用デモボードの納期は48時間

直前の設計変更を経て、6層のデモボードが48時間以内に製造・出荷され、展示会開幕の2日前に間に合う形で到着した。

48h
事業再生
6L
レイヤー
10pcs
数量
結果

基板は、展示会開幕前に組み立てと機能テストを行うための余裕を持って到着したため、展示の機会を逃すことはなかった。

Field Service · Urgent Repair

即日対応の2層フィールド交換用基板

生産ラインで故障したユニットを交換するため、1枚の2層コントローラ基板を当日中に製造し、数日間にわたる設備の停止を回避した。

0d
事業再生
1pc
数量
2L
レイヤー
結果

交換用基板は注文確認当日に発送されたため、本来なら数日間に及ぶはずだった生産停止時間を、合計48時間未満に短縮することができました。

Startup · MVP Iteration

72時間の10段階MVP反復サイクル

3週間の間に3回の設計改訂を経て、72時間で10層のMVPハードウェア基板を製造した。各改訂では、起動テストで得られた知見が反映された。

72h
改訂ごとに
3rev
反復
10L
レイヤー
結果

通常6週間かかる設計・製造・テストのサイクルを3週間で3回完了させ、資金調達可能なハードウェアデモの実現に向けたチームのプロセスを加速させた。

FAQ

クイックターンPCB製造に関するよくある質問

短納期、スケジュール、価格に関する技術的な質問。

Same-day turnaround is available for simple 2-layer boards with standard specifications (no controlled impedance, standard trace/space, standard finish) submitted early in the working day. 24-hour turnaround covers more complex 2-layer designs and standard 4-layer boards. Multilayer boards above 6 layers require 48-72 hours due to the physical time needed for lamination cycles — this floor cannot be compressed regardless of surcharge.

This service covers bare-board fabrication only — etching, drilling, lamination, surface finish and electrical test of the unpopulated PCB. If you also need component sourcing and assembly on a rush schedule, see our Prototype Assembly service, which handles expedited turnkey and consignment assembly of populated boards separately from bare-board fabrication turnaround.

いいえ。当社では、短納期の製造に対応するため、最小注文数量を設けず、1点からのご注文も承っております。急ぎの注文については、標準的な生産ロットの合間に、当社の画像処理、穴あけ、ラミネート装置の空き容量に合わせてスケジュールを組んでおります。そのため、スケジュールを組むための大量注文を必要とせず、少量での急ぎ注文も経済的に実現可能です。

急ぎの追加料金は、納期に応じて段階的に設定されています。標準の5日納期の場合は追加料金はかかりませんが、72時間および48時間納期の場合は中程度の追加料金が、24時間または当日納期の場合は、優先的なスケジュール調整や時間外生産コストがかかるため、最も高い追加料金が適用されます。お客様の基板にかかる正確な追加料金は、ガーバーファイルをアップロードし、納期レベルを選択すると、当社のオンライン見積ツールに即座に表示されます。

Upload your Gerber or ODB++ files to our online quoting tool, select layer count, quantity and turnaround tier, and receive a price and confirmed ship date immediately. The instant quote is based on your stated parameters; final pricing is confirmed after our rush CAM/DFM review clears the files (typically under 2 hours) — if a design rule issue is found, our engineer will contact you before production rather than silently adjusting the order.

Boards up to 8 layers are typically achievable within a 48-hour window; boards from 8 up to 12-16 layers require the full 72-hour window to accommodate multiple sequential lamination cycles. Designs with tight controlled impedance requirements, blind/buried vias, or heavy copper add engineering review time and may shift a job to the next turnaround tier — this is confirmed during CAM review, and we will flag it before committing to a ship date.

お見積りをご依頼ください

Get your quick-turn board scheduled — today.

ガーバーファイルをアップロードし、納期プランを選択してください。当社の緊急対応エンジニアリングチームが2時間以内にCAMレビューを完了し、出荷日を確認いたします。

  • ご注文ごとに、RushによるCAM/DFMレビューが含まれます
  • NDA signed on request — standard practice
  • 最低注文数量なし
  • 当日納品から72時間以内の納品までの各納期プランをご用意しています
  • Instant online quote — no waiting for a callback
PCBの短納期見積もりを依頼する All files encrypted · Max 80MB · Rush CAM review included

お見積りのお申し込み

以下の詳細をご記入ください。折り返しご連絡いたします。

WhatsApp