Full electromechanical system integration — PCBA installed into enclosures, cable harnesses built and routed, sub-assemblies integrated, functionally tested and packaged for direct shipment. One vendor, one finished product.
Any product that needs more than a bare board — enclosure, cabling, test, packaging — is a box build candidate. Hover to explore.
ワイヤーハーネスおよび制御ユニットのサブアセンブリは、仕様に従って製造・取り付けられ、すべてのハーネスについて導通検査および引張試験による検証が行われています。
ISO 13485に準拠して製造された診断・監視装置で、出荷前に完全な筐体組立、バーンイン試験、およびシステムレベルの機能試験が実施されています。
Control panels and PLC cabinets built complete — DIN rail mounting, terminal wiring, labeling and functional test on the bench before install.
Finished products shipped direct to fulfillment centers — enclosure assembly, firmware flashing, custom retail packaging and kitting included.
基地局用キャビネットおよびネットワーク機器には、電源装置、RFケーブル、ラックマウント用金具が組み込まれており、出荷前にバーンイン試験を実施しています。
ミリタリー規格のコネクタおよびケーブルアセンブリを備えた堅牢な筐体で、AS9100Dに準拠した工程管理の下で製造され、シリアル番号が割り当てられています。
ゲートウェイおよびセンサーハブは、組み立て、無線テスト、および量産用ファームウェアによる設定が完了した後、小売店への直接出荷用に梱包されます。
インバータおよび電源ユニットは、大電流用ケーブルを備えた筐体に組み込まれており、定格出力全開状態で負荷試験およびバーンイン試験が実施されています。
Box build is a manufacturing discipline in its own right — mechanical, electrical and software all have to come together correctly, in the right order, every unit.
Every board arriving for box build — whether assembled by us or supplied by the customer — is visually and electrically checked against the build spec before it enters the integration line.
Incoming QC · spec verification筐体、シャーシ、ブラケットは、PCBAの取り付けに先立ち、下処理、穴あけ、あるいはスタンドオフ、締結部品、パネル取り付け用金具の取り付けが行われます。電子部品表(BOM)と併せて、機械部品の完全な部品表(BOM)も調達されます。
Enclosure prep · hardware fit-up特注のケーブルおよびワイヤーハーネスアセンブリは社内で製造され、コネクタが取り付けられた後、基板、パネル、および電源装置間に配線されます。サブアセンブリは、最終的な統合に先立ち、組み立てられ、準備されます。
Custom harness fabrication · connectorizationPCBAを準備済みの筐体に組み込み、基板間および電源ケーブルの配線をすべて接続した後、各ユニットに対して生産用ファームウェアとデバイス固有の設定を書き込み、検証を行います。
Firmware flashing · configurationすべてのユニットは、お客様の製品に合わせて特注で製作されたテスト治具を使用して動作確認を行い、お客様の受入基準に基づいて機能性を検証します。その後、アプリケーションの要件に応じてバーンイン・ソークテストを実施します。
100% functional test · burn-inフロントパネルのラベルとシルクスクリーン印刷を施し、完全なトレーサビリティを確保するために各ユニットにシリアル番号を付与した後、お客様のご指定のパッケージデザインに合わせて梱包し、直送対応用のキットにまとめます。
Serialization · custom packaging · drop-ship電子機器の製造、機械組立、試験、およびパッケージングのすべてが、1つの施設内で行われています。
各作業台には、リストストラップ、ESD対策床材、イオン化空気を備えた専用のシステム統合ステーションが設置されており、機械組立、配線、試験の各工程を通じて、実装済み基板を保護しています。
In-house cutting, stripping, crimping and connectorization for custom cable assemblies and wire harnesses — built to your drawing, tested for continuity and pull strength on every unit.
お客様の製品に合わせて特別に設計されたカスタムテスト治具を使用し、すべてのユニットに対して完全な機能検証を実施します。また、必要に応じてバーンインチャンバーを用いた長期浸漬試験も実施します。
お客様の製品に合わせて設計された特注の発泡材、段ボール、またはブリスター包装に加え、キット化、シリアル番号付きラベル貼付、およびお客様のお客様や物流センターへの直送フルフィルメントサービスを提供いたします。
以下の各パラメータは、当社の標準的なボックス組み立て能力を反映したものです。すべての注文には、完全な試験報告書、シリアル番号記録、および梱包仕様書が同梱されます。
| パラメータ | 筐体組み立て能力 | ステータス |
|---|---|---|
| 筐体サイズの範囲 | 最大600 × 500 × 300 mmまでの手持ち測定 | 在庫あり |
| イーサネットケーブル | 圧着、IDC、はんだ付け、特注図面 | 在庫あり |
| 部品表(BOM)の調達 | 電子式+機械式+電気機械式 | 在庫あり |
| アセンブリ環境 | ESD対策済みの作業台 | 在庫あり |
| ファームウェア/設定 | ユニットごとのフラッシングおよび設定 | 在庫あり |
| 機能テストのカバレッジ | 全ユニット、特注の備品 | 在庫あり |
| バーンイン試験 | ご要望に応じて、申請ごとに提供可能です | 在庫あり |
| シリアル化とトレーサビリティ | 製品単位でのシリアル番号およびロット番号の完全な追跡 | 在庫あり |
| パッケージの選択肢 | 特注フォーム/段ボール/小売用/キット入り | 在庫あり |
| 標準リードタイム | 12 – 18 working days | 在庫あり |
A box build is only as reliable as its weakest sub-assembly. Our QMS covers electronics, mechanical assembly and final system test with the same rigor — full documentation, every unit.
Real box build and system integration challenges — and how we solved them.
Full DIN-rail control panel build — PCBA install, terminal wiring, custom harnesses and functional test against the customer's ladder logic before shipment.
配線、PCBAの取り付け、および試験を1つの注文に統合したことで、顧客の組立時間を3社のベンダーから1社に短縮し、現場での配線ミスは1件も報告されませんでした。
PCBA、特注筐体、バッテリーハーネスを組み合わせてISO 13485に準拠した筐体組立を行い、最終的な機能リリース試験の前に48時間のバーンイン・ソークを実施します。
48時間のバーンイン試験により、出荷前にバッテリーコネクタユニットの不具合が2件発見され、完全なシリアル化により、顧客は監査の際にロット情報を即座に追跡することができました。
電源モジュールを組み込んだラックマウント型キャビネットの統合、RFケーブルの配線、カスタムラベルの貼付、および現場への直接導入に向けた梱包・出荷キット化。
60カ所以上の展開先への完全なドロップシップ方式によるキット供給により、顧客側の倉庫保管や準備工程が不要となり、導入期間を大幅に短縮することができました。
Turning a bare board into a finished, tested, shippable product touches mechanical, electrical and software domains at once. We run all three under one process owner — so nothing gets lost between hand-offs.
PCBs, components, connectors, enclosures, fasteners and cable stock all sourced under a single purchase order — no separate mechanical supplier for you to manage.
Our test engineering team builds a dedicated functional test fixture around your acceptance criteria, so every single unit is verified — not sampled — before it ships.
Every finished product carries a serial number linked back to its PCBA lot, cable batch and firmware version — full traceability for warranty claims and field recalls.
Custom packaging designed around your product, kitted to your spec, and shipped direct to distribution centers or end customers — no intermediate warehousing step needed.
ボックス組み立ておよびシステム統合組立に関するよくある質問。
PCB assembly produces a populated circuit board (PCBA). Box build takes that PCBA and builds it into a complete, shippable product — installing it in an enclosure, wiring cable harnesses, integrating sub-assemblies, flashing firmware, running functional test and burn-in, then labeling and packaging the finished unit.
Yes. We source the full BOM — components, connectors, cable stock, enclosures, fasteners, brackets and any electromechanical parts — under a single purchase order, so you don't need to manage a separate mechanical supplier alongside your electronics vendor.
Yes — cutting, stripping, crimping, IDC and connectorization are all done in-house to your drawing or specification, with continuity and pull-strength testing on every harness before it goes into final assembly.
はい。ファームウェアの書き込みおよびデバイス固有の設定は、当社のシステム統合段階における標準的な手順であり、機能テストの前に、お客様が指定されたバージョンおよびチェックサムに基づいて、各ユニットごとに検証を行います。
Our test engineering team builds a dedicated fixture around your product's acceptance criteria — power-on self-test, I/O verification, communications checks and any custom functional steps you specify. Where your application needs it, we add extended burn-in soak testing to screen out early-life failures before shipment.
Yes. We design custom retail or industrial packaging around your finished product, kit units to your spec, and drop-ship directly to distribution centers or end customers — removing the need for you to warehouse and repack finished goods.
当社のシステムインテグレーションチームが、お客様のBOM、機械図面、および試験要件を確認し、24営業時間以内に完全なターンキー方式の見積書をご提示いたします。
以下の詳細をご記入ください。折り返しご連絡いたします。
当サイトでは、ユーザーの利便性を高めるためにクッキーを使用しています。詳しくは、当社の プライバシーポリシー.